JIS-G-1201-2001-R2006-ENG.pdf
《JIS-G-1201-2001-R2006-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-G-1201-2001-R2006-ENG.pdf(35页珍藏版)》请在三一文库上搜索。
1、o t J IS JAPANESE I NDUSTRIAL STA N D A R D Translated and Published by Japanese Standards Association JIS G 1201 : 2001 Iron and steel- General rules for analytical methods ICs 77.040.30; 77.080.01 Descriptors : iron, ferrous metals, ferrous alloys, chemical analysis and testing, Reference number :
2、 JIS G 1201 : 2001 (E) determination of content 18 s G 1201 : 2001 Foreword This translation has been made based on the original Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee, as the result of
3、proposal for revision of Japanese Industrial Standard submit- ted by the Japan Iron and Steel Federation (JISFYthe Japanese Standards Association (JSA) with the draft being attached, based on the provision of Article 12 Clause 1 of the Industrial Standardization Law. Conse- quently JIS G 1201 : 1992
4、 is replaced with this Standard. In this revision, treatment of an appliance in the case where each analytical standard is the translated standard of International Standard, treating method for the tolerance in the case where a tolerance is not specified in each analytical standard, treatment of the
5、 analytical method in the case where the chemical analytical method is not specified in 3” _- - - - 1 2 - - L 2 - . - l ? - ? - . - A ID 011 appircaiuri r an irisLrumeniai analysis aiid a traceability can not be secured, and the like are revised. Attention is drawn to the possibility that some parts
6、 of this Standard may conflict with a patent right, application for a patent after opening to the public, utility model right or application for registration of utility model after opening to the public which have technical properties. The relevant Minister and the Japanese Industrial Standards Comm
7、ittee are not responsible for identifying the patent right, application for a patent after opening to the public, utility model right or application for registration of utility model after opening to the public which have the said technical properties. Date of Establishment: 1953-03-28 Date of Revis
8、ion: 2001-04-20 Date of Public Notice in Official Gazette: 2001-04-20 Investigated by: Japanese Industrial Standards .Committee Divisional Council on Iron and Steel JIS G 1201 :2001, First English edition published in 2001-12 Translated and published by: Japanese Standards Association 4-1-24, Akasak
9、a, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the contents, the original JIS is to be the final authority. a O JCA 2001 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or
10、 mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Japan JAPANESE INDUSTRIAL STANDARD JIS G 1201 : 2001 2 Normative references The following standards contain provisions which, through reference in this Standard, constitute provisions of t
11、his Standard. The most recent editions of the standards (including amendments) indicated below shall apply. For International Standards which are withdrawn, the replaced standard applies. JIS G 0417 Steel and iron-Sampling and preparation of samples for the deter- mination of chemical composition JI
12、S K 0050 General rules for chemical analysis JIS K 0116 General rules for atomic emission spectrometry JIS K O119 General rules for X-ray fluorescence spectrometric analysis JIS K 0211 Technical terms for analytical chemistry (general part) JIS K 0557 Water used for industrial water and wastewater a
13、nalysis JIS R 3503 Glass apparatus for chemical analysis JIS R 3505 Volumetric glassware JIS Z 261 1 General rules for photoelectric emission spectrochemical analysis of metal materials General rules for determination of carbon in metallic materials General rules for determination of sulfur in metal
14、lic materials Guide to the rounding of numbers JIS Z 2615 JIS Z 2616 JIS Z 8401 JIS Z 8402-1 Accuracy (trueness and precision) of measurement methods and results-Part 1 : General principles and definitions Iron and steel- General rules for analytical methods 1 Scope This Japanese Industrial Standard
15、 specifies general items common to analytical methods of iron and steel and analytical methods of nickel chromium steel alloy. Further, iron in this Standard indicates pig iron, cast iron and the like, and steel indicates carbon steel, low alloy steel, high alloy steel (including stainless steel) an
16、d the like. Standards of analytical methods to which this Standard is applied are given in Annex. Remarks : JIS Z 8402-2 Accuracy (trueness and precision) of measurement methods and results-Part 2 : Basic method for the determination of repeatabil- ity and reproducibility of a standard measurement m
17、ethod JIS Z 8402-3 Accuracy (trueness and precision) of measurement methods and results-Part 3 : Intermediate measures of the precision of a stan- dard measurement method JIS Z 8402-4 Accuracy (trueness and precision) of measurement methods and results-Part 4 : Basic methods for the determination of
18、 the true- ness of a standard measurement method 2 G 1201 : 2001 JIS Z 8402-6 Accuracy (trueness and precision) of measurement methods and results-Part 6 : Use in practice of accuracy values JIS Z 8801-1 Test sieves-Part 1 : Test sieves of metal wire cloth ISO/R 377 Selection and preparation of samp
19、les and test pieces for wrought steel Remarks : Specifications concerning the analytical sampling in this standard have been replaced by IS0 14284. Selection and preparation of samples and test pieces for wrought steel Specifications concerning the analytical sampling in this standard have been repl
20、aced by IS0 14284. Selection and preparation of samples and test pieces for wrought steel- Part 2 : Samples for the determination of the chemical composition Specificat.inns concerning the anal-ytical sampling in this standard have been replaced by IS0 14284. IS0 385-1 Laboratory glassware-Burettes-
21、Part 1 : General requirements IS0 565 Test sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of openings IS0 648 Laboratory glassware-One-mark pipettes IS0 1042 Laboratory glassware-One-mark volumetric flasks IS0 3696 Water for analytical laboratory use-Specificat
22、ion and test methods IS0 3819 Laboratory glassware-Beakers IS0 4793 Laboratory sintered (fritted) filters-Porosity grading, classification and designation IS0 4800 Laboratory glassware-Separating funnels and dropping funnels IS0 5725-1 Accuracy (trueness and precision) of measurement methods and res
23、ults-Part 1 : General principles and definitions IS0 5725-2 Accuracy (trueness and precision) of measurement methods and results-Part 2 : Basic method for the determination of repeatability and reproducibility of a standard measurement method IS0 5725-3 Accuracy (trueness and precision) of measureme
24、nt methods and results-Part 3 : Intermediate measures of the precision of a standard measurement method IS0 14284 Steel and iron-Sampling and preparation of samples for the deter- mination of chemical composition IS0 377 Remarks : IS0 377-2 Remirks : 3 Definitions For main terms used in this Standar
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- JIS 1201 2001 R2006 ENG
链接地址:https://www.31doc.com/p-3784705.html