《JIS-G-0415-1999-R2004-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-G-0415-1999-R2004-ENG.pdf(7页珍藏版)》请在三一文库上搜索。
1、JIS G 0415:i (IS0 10474 1991) JIS JAPANESE I N D U STR I AL STAN DARD Translated and Published by Ja pa nese Standards Association Steel and steel products- Inspection documents ICS 77.140.01 Descriptors : steel, ferrous metals, inspection, product specification, materiais Reference number : JS G 04
2、15 : 1999 (E) specification, delivery, technical documents 4s G 0415 : 1999 (IS0 10474 : 1991) Foreword This translation has been made based on the original Japanese Industrial Standard established by the Minister of International Trade and Industry through deliberations at Japanese Industrial Stand
3、ards Committee in accordance with the Industrial Standardization Law. This Standard has been established in accordance with the 3-year Plan for the Conformity to the International Standards led by the Agency of Industrial Science and Technology. As a result of investigation and deliberation made for
4、 conformity between JIS and the corresponding International Standard concerning general rules for testing and inspection of steel, it was made clear that although there was a considerable difference in structure between JIS and the corresponding International Standard, it included the content of JIS
5、 sufficiently. After discussions held with conformity of the structure of JIS to that of the corresponding International Standard and withdrawal of the current JIS in mind, the corresponding International Standard was adopted in its entirety with regard to the detailed report for which JIS G 0303 Ge
6、neral rules for inspection of steel had formerly offered provisions, and consequently this Japanese Industrial Standard was established on the basis of IS0 10474 Steel and steel products-Inspection documents. Attention is drawn to the possibility that some parts of this Standard may conflict with a
7、patent right, application for a patent after opening to the public, utility model right or application for registration of utility model after opening to the public which have technical properties. The relevant Minister and the Japanese Industial Standards Committee are not responsible for public, u
8、tility model right or application for registration of utility model after opening to the public which have the said technical properties. Date of Establishment: 1999-01-20 Date of Public Notice in Official Gazette: 1999-01-20 Investigated by: Japanese Industrial Standards Committee Divisional Counci
9、l on Iron and Steel JIS G 0415 : 1999, First English edition published in 1999-08 Translated and published by: Japanese Standards Association 4-1-24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the contents, the original JIS is to be the final authority. * 1 c
10、O JCA 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Japan -,-,- JAPANESE INDUSTR
11、IAL STANDARD JIS G 0415 : 1999 (IS0 l474 : 1991) Steel and steel products- Inspection documents Introduction This is the Japanese Industrial Standard prepared on the basis of Ist, 1991 as the first edition, without modifying its technical content and structure. b IS0 10474 Steel and steel products-I
12、nspection documents published on December 1 General 1.1 Scope This Standard defines the Werent types of inspection documents supplied to the purchaser, in accordance with the requirements of the order, for the delivery of iron and steel products. However, if agreed in the order, it may also apply to
13、 other products. This Standard is to be used in conjunction with other International Standards which specify the general technical delivery conditions: - for steel and steel products, see IS0 404 - for steel castings, see IS0 4990 1.2 Normative references The following standards contain provisions w
14、hich, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most rece
15、nt editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Stan- dards. IS0 404 : 1992 Steel and steel products-General technical delivery requirements IS0 4990 : 1986 Steel castings-General technical delivery requirements 1.3 Definitions
16、 For the purposes of this Standard, the following definitions ap- Ply. 1.3.1 non-specific inspection and testing Inspection and testing carried out by the manufacturer in accordance with his own procedures, to assess whether prod- ucts made by the same manufacturing process meet the requirements of
17、the order. The products inspected and tested may not necessarily be the products actually sup- plied. IS0 404 : 1992, 3.41 U 1.3.2 specific inspection and testing Inspection and testing carried out, before delivery, according to the technical requirements of the order, on the products to be supplied
18、 or on test units of which the product supplied is part, in order to verify whether these products comply with the requirements of the order. 7 IS0 404 : 1992, 3.51 Remarks : Current discussions indicate that the term “inspection and test- ing” will be replaced by “inspection”. STD-JIS G O4LS-ENGL 1
19、999 W 4933608 0556996 48b 2 G 0415 : 1999 (IS0 10474 : 1991) 2 Documents drawn up from inspection and tests carried out by personnel authorized by the manufacturer and who may be involved in the manufac- turing department 2.1 Certificate of compliance with the order “2.1” A document in which the man
20、ufacturer certifies that the products supplied comply with the requirements of the order, without mention of any test results. The certificate of compliance with the order “2.1” is a document drawn up on the basis of non-specific inspection and testing. 2.2 Test report “2.2” A document in which the
21、manufacturer certifies that the products supplied comply with the requirements of the order, and in which he sup- plies test results based on non-specific inspection and testing. 2.3 Specific test report “2.3” A document in which the manufacturer certifies that the products supplied comply with the
22、specifications of the order, and in which he supplies test results based on specific inspection and testing. The specific test report “2.3” is only used by a manufacturer who does not have an authorized quality control department which is independent of the manufactur- ing departments. If the manufa
23、cturer uses an authorized quality control department which is inde- pendent of the manufacturing department, he shall supply a 3.1.B certificate (see 3.1) instead of a 2 . 3 certificate. 3 Documents drawn up from inspection and tests carried out or supervised by authorized personnel independent of t
24、he manufacturing department, and based on specific testing 3.1 Inspection certificate A document issued on the basis of inspection and tests carried out in accordance with the technical specifications of the order or of official regulations and the corresponding technical rules. The tests shall be c
25、arried out on the products supplied or those in the inspection unit of which the consignment constitutes a part. The inspection unit is set by the product standard, the official regulations and corresponding technical rules or by the order. There are three different types as follows. Inspection Cert
26、ificate “3. LA” is issued and validated by an inspector designated in the official regulations, in accordance with these and the corresponding technical rules. Inspection certificate “3.1.B” is issued by the department independent of the manufacturing department and is validated by an authorized rep
27、resentative of the staff independent of the manufacturing department. Inspection certificate “3.1.C” is issued and validated by an authorized repre- sentative of the purchaser, in accordance with the specifications of the order. 4 i rn 4933608 055b7 312 rn 3 G 0415 : 1999 (IS0 10474 : 1991) 3.2 Insp
28、ection report Where the inspection certificate is validated, following a special agreement, both by the manufacturers authorized representative and the purchasers authorized representative, it is known as inspection report “3.2”. 4 Inspection documents to be supplied by a process or an intermediary
29、When a product is supplied by a processor or an intermediary, they shall submit to the purchaser, without any modifications, the manufacturers documentation as described in this Standard. This documentation shall include suitable means of identification of the product, in order to ensure the traceab
30、ility between the product and the documentation (see IS0 404 : 1992). If the processor or intermediary has changed the state or dimensions of the prod- uct in any way, he shall supply an additional document of compliance for these new conditions. This shall also apply to all special requirements not
31、 included in the manufacturers documentation. 5 Validation of inspection documents The inspection documents shall be signed or marked in an appropriate way by the person(s) responsible for the validation of documents. However, if the certificates are prepared by a suitable data-processing system, th
32、e signature may be replaced by an indication of the name and position of the person responsible for validating the document. 6 Summary of document A summary of documents covered by this Standard is given in Table 1. 4 . G 0415 : 1999 (IS0 10474 : 1991) Table 1 Summary of inspection documents Standar
33、d designation (subclause number) Document Type of control Contents of document Document signed by Delivery conditions 2.1 Non- specific In accordance with the requirements of the order, and if required, also in accordance with official regulations and the corre- sponding technical d e s The manufact
34、urer Certicate of compiiance with the order Test report Without mention of test results 2.2 With mention of test results based on non-specific inspection and testing 2.3 specific test report specific With mention of test results based on specific inspec- tion and testing 3.1.A inspection certificate
35、 3.1.A In accordance with official regulations and the corre- sponding technical d e s The inspector designated in the official regulations 3.1.B Inspection certificate 3 . 1 . B In accordance with the specifications of the order, and if required, also in accordance with official regulations and the
36、 corre- sponding technical rules The manufac- turers authorized representative independent of the manufacturing department Inspection certicate 3 . 1 . C _ In accordance with the specifications of the order The purchasers authorized repre- sentative 3.1.C 3.2 Inspection report 3.2 The manufac- turer
37、s authorized representative independent of the manufacturing department, and the purchasers authorized repre- sentative Errata for JiS (English edition) are printed in Szandurdization Journal, published monthiy by the Japanese Standards Association, and also provided to subscribers of JIS (English edition) in Monthly Informafion. Errata will be provided upon request, please contact Standardization Promotion Department, Japanese Standards Association 41-24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN TEL. 03-3583-8002 FAX. 03-3583-0462
链接地址:https://www.31doc.com/p-3785636.html