NEMA-MW-1000-2003.pdf
《NEMA-MW-1000-2003.pdf》由会员分享,可在线阅读,更多相关《NEMA-MW-1000-2003.pdf(223页珍藏版)》请在三一文库上搜索。
1、 ANSI/NEMA MW 1000 Revision 2, 2006 ANSI/NEMA MW 1000 Revision 2, 2006 MAGNET WIRE -,-,- Approved as an American National Standard ANSI Approval Date: December 12, 2006 ANSI/NEMA MW 1000-2003 Revision 2, 2006 Magnet Wire Published by National Electrical Manufacturers Association 1300 North 17th Stre
2、et, Suite 1752 Rosslyn, Virginia 22209 www.nema.org Copyright 2006 by the National Electrical Manufacturers Association. All rights including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, a
3、nd the International and Pan American Copyright Conventions. -,-,- NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessari
4、ly mean that there is unanimous agreement among every person participating in the development of this document. The National Electrical Manufacturers Association (NEMA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus st
5、andards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write th
6、e document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whats
7、oever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or completeness of any information pu
8、blished herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In
9、 publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her ow
10、n independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to c
11、onsult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any cert
12、ification or other statement of compliance with any health or safety related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. MW 1000-2003, Revision 1, June 16, 2005 Page i Copyright 2005 by the National Elect
13、rical Manufacturers Association. CONTENTS Page Foreword .xi How to Use this Publicationxii Part 1 GENERAL 1.1 Scope.1 1.2 Normative References and Authorized Engineering Information (AEI) 1 1.3 Definitions2 1.4 Materials4 1.4.1 Conductors Round, Square, and Rectangular, Copper and Aluminum4 1.4.2 In
14、sulating Materials.5 1.5 Manufacturing5 1.5.1 Application of Insulation .5 1.5.2 Intermediate Sizes6 1.5.3 Joints 6 1.5.4 Packaging.6 1.6 Test Conditions and Parameters.7 1.6.1 Safety Statement7 1.6.2 Selection of Specimens7 1.6.3 Ambient Conditions of Test 7 1.6.4 Power Frequency .7 1.6.5 Mandrels.
15、7 1.6.6 Rectangular and Square Wire8 1.6.7 Round Wire.8 1.6.8 Periodic Conformance 8 1.6.9 Retests .8 1.7 Units of Measure .9 1.8 Thermal Class of Magnet Wire9 1.9 Ordering Information9 1.9.1 Product Identification Number9 1.9.2 Minimum Ordering Data .10 Tables 1-1 Dimensions for Bare and Film Insul
16、ated Round Magnet Wire11 1-2 Round Copper Wire, Ultra Fine Sizes by Resistance .17 1-3 Dimensions for Round Film Insulated Self-Bonding Magnet Wire18 1-4 Dimensions for Single Glass Fiber Covered Round Bare, Single Film Coated and Heavy Film Coated Wire.20 1-5 Dimensions for Double Glass Fiber Cover
17、ed Round Bare, Single Film Coated and Heavy Film Coated Wire.22 1-6 Dimensions for Single Polyester Glass Fiber Covered Round Bare, Single Film Coated and Heavy Film Coated Wire.24 1-7 Dimensions for Double Polyester Glass Fiber Covered Round Bare, Single Film Coated and Heavy Film Coated Wire.26 1-
18、8 Dimensions and Radii for Rectangular Bare Wire.28 1-9 Bare Rectangular Conductor Tolerances28 -,-,- MW 1000-2003, Revision 1, June 16, 2005 Page ii Copyright 2005 by the National Electrical Manufacturers Association. 1-10 Film Insulated Rectangular Magnet Wire Increase in Thickness and Width Due t
19、o Film Coating .28 1-11 Dimensions of Square Bare Wire29 1-12 Heavy and Quadruple Film Insulated Square Magnet Wire Increase in Dimensions Due to Film Coating30 1-13 Range of Increase in Dimensions, Inches Single Glass Fiber Covered Heavy Film Insulated Rectangular Copper Wire31 1-14 Range of Increa
20、se in Dimensions, Inches Double Glass Fiber Covered Bare Rectangular Copper Wire 32 1-15 Range of Increase in Dimensions, Inches Double Glass Fiber Covered Heavy Film Coated Rectangular Copper Wire.33 1-16 Range of Increase in Dimensions, Inches Single Polyester Glass Fiber Covered Heavy Film Insula
21、ted Rectangular Copper Wire .34 1-17 Range of Increase in Dimensions, Inches Double Polyester Glass Fiber Covered Bare Rectangular Copper Wire35 1-18 Range of Increase in Dimensions, Inches Double Polyester Glass Fiber Covered Heavy Film Coated Rectangular Copper Wire.36 1-19 Single Glass Fiber Cove
22、red, Heavy Film Insulated Square Copper Magnet Wire Minimum Increase and Maximum Overall Dimensions Due to Insulation.37 1-20 Single Polyester Glass Fiber Covered Heavy Film Insulated Square Copper Magnet Wire-Minimum Increase and Maximum Overall Dimensions Due to Insulation38 1-21 Double Glass Fibe
23、r Covered, Bare or Heavy Film Insulated Square Copper Magnet Wire Minimum Increase and Maximum Overall Dimensions Due to Insulation.39 1-22 Double Polyester Glass Fiber Covered, Bare or Heavy Film Insulated Square Copper Magnet WireMinimum Increase and Maximum Overall Dimensions Due to Insulation40
24、1-23 Comparison Between AWG and IEC R-40 Series Bare Wire Diameters .41 1-24 Comparison Between NEMA and IEC Increases and Overall Diameters.43 -,-,- MW 1000-2003, Revision 1, June 16, 2005 Page iii Copyright 2005 by the National Electrical Manufacturers Association. CONTENTS (continued) Part 2 PROP
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NEMA MW 1000 2003
链接地址:https://www.31doc.com/p-3787103.html