NACE-MR0175-ISO-15156-3-CIR-2-2008.pdf
《NACE-MR0175-ISO-15156-3-CIR-2-2008.pdf》由会员分享,可在线阅读,更多相关《NACE-MR0175-ISO-15156-3-CIR-2-2008.pdf(3页珍藏版)》请在三一文库上搜索。
1、ICS 75.180.01 Ref. No. ANSI/NACE MR0175/ISO 15156- 3:2003/Cir.2:2008(E) ANSI/NACE/ISO 2008 All rights reserved Published by the ISO 15156 Maintenance Agency (DIN-Germany) INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL STANDARD ANSI/NACE MR01
2、75/ISO 15156-3:2003 TECHNICAL CIRCULAR 2: 2008 Published 2008-11-17 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2 Industries du ptrole
3、et du gaz naturel Matriaux pour utilisation en prsence de H2S dans la production de ptrole et de gaz naturel Partie 1: Principes gnraux pour le choix des matriaux rsistant au craquage CIRCULAIRE TECHNIQUE 2 Technical Circular 2 to ANSI/NACE MR0175/ISO 15156-3 was prepared by the ISO 15156 Maintenanc
4、e Agency on behalf of Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries. ANSI/NACE MR0175/ISO 15156-3:2003/Cir.2:2008(E) 2 ANSI/NACE/ISO 2008 All rights reserved Foreword The establishment of the ISO 15156 Maintenance
5、Agency was confirmed by the ISO Technical Management Board in June 2007. A copy of the TMB Vote-Form Number: 34/2007 giving the rules of procedure for the maintenance agency can be obtained from the ISO TMB Secretariat. It is also available from the ISO 15156 website at www.iso.org/iso15156maintenan
6、ce . ANSI/NACE MR0175/ISO 15156 series has, since publication, been amended by a number of Technical Corrigenda and Technical Circulars and consists of the following parts, under the general title Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas pr
7、oduction: Part 1: General principles for selection of cracking-resistant materials (2001) Technical Corrigendum 1, ANSI/NACE MR0175/ISO 15156-1:2001/Cor.1:2005(E) (2005-09-01) Technical Circular 1, ANSI/NACE MR0175/ISO 15156-1:2001/Cir.1:2007(E) (2007-12-15) Part 2: Cracking-resistant carbon and low
8、 alloy steels, and the use of cast irons (2003) Technical Corrigendum 1, ANSI/NACE MR0175/ISO 15156-2:2003/Cor.1:2005(E) (2005-09-01) Technical Circular 1, ANSI/NACE MR0175/ISO 15156-2:2003/Cir.1:2007(E) (2007-12-15) Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (2003
9、) Technical Corrigendum 1, ANSI/NACE MR0175/ISO 15156-3:2003/Cor.1:2005(E) (2005-02-15) Technical Corrigendum 2, ANSI/NACE MR0175/ISO 15156-3:2003/Cor.2:2005(E) (2005-09-01) Technical Circular 1, ANSI/NACE MR0175/ISO 15156-3:2003/Cir.1:2007(E) (2007-12-15) Technical Circular 2, ANSI/NACE MR0175/ISO
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NACE MR0175 ISO 15156 CIR 2008
链接地址:https://www.31doc.com/p-3787948.html