NF-EN-12373-1-2001-ENG.pdf
《NF-EN-12373-1-2001-ENG.pdf》由会员分享,可在线阅读,更多相关《NF-EN-12373-1-2001-ENG.pdf(30页珍藏版)》请在三一文库上搜索。
1、NF EN 12373-1 novembre 2001 Ce document est usage exclusif et non collectif des clients Saga Web. Toute mise en rseau, reproduction et rediffusion, sous quelque forme que ce soit, mme partielle, sont strictement interdites. This document is intended for the exclusive and non collective use of Saga W
2、eb customers. All network exploitation, reproduction and re-dissemination,even partial, whatever the form (hardcopy or other media), is strictly prohibited. Saga Web Pour THALES CORPORATE SERVICES SAS - EPM Client 04988312 le 16/7/2009 10:09 AFNOR 2001AFNOR 20011st issue 2001-11-P AFNOR 2001 All rig
3、hts reserved FE101352ISSN 0335-3931 NF EN 12373-1 November 2001 Classification index: A 91-455-1 European standard French standard Published and distributed by Association Franaise de Normalisation (AFNOR French standard institute) 11, avenue Francis de Pressens 93571 Saint-Denis La Plaine Cedex Tel
4、.: + 33 (0)1 41 62 80 00 Fax: + 33 (0)1 49 17 90 00 www.afnor.fr ICS: 25.220.20 Aluminium and aluminium alloys Anodizing Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium F : Aluminium et alliages daluminium Anodisation Partie 1 : Mthode de spcification d
5、es caractristiques des revtements dcoratifs et protecteurs obtenus par oxydation anodique sur aluminium D : Aluminium und Aluminiumlegierungen Anodisieren Teil 1: Methode zur Spezifizierung dekorativer und schtzender anodisch erzeugter Oxidschichten auf Aluminium French standard approved by decision
6、 of the Director General of AFNOR on October 5, 2001 taking effect on November 5, 2001. CorrespondenceThe European standard EN 12373-1:2001 has the status of French standard. AnalysisThis document gives a method for specifying decorative and protective coatings obtained by anodic oxidation on alumin
7、ium. DescriptorsTechnical International Thesaurus: metal finishing, anodizing, aluminium, alumin- ium alloys, protective coatings, decorative coatings, specifications, definitions, tests, thickness, thickness measurement, sealing, quality, appearance, colour, corrosion resistance, abrasion resistanc
8、e, colour fastness, optical properties. Modifications Corrections NF EN 12373-1:2001 2 National foreword References to French standards The correspondence between the standards figuring in the clause “Normative references“ and the identical French standards is as follows: EN 12373-2: NF EN 12373-2 (
9、classification index: A 91-455-2) EN 12373-3: NF EN 12373-3 (classification index: A 91-455-3) EN 12373-4: NF EN 12373-4 (classification index: A 91-455-4) EN 12373-5: NF EN 12373-5 (classification index: A 91-455-5) EN 12373-6: NF EN 12373-6 (classification index: A 91-455-6) EN 12373-7: NF EN 1237
10、3-7 (classification index: A 91-455-7) EN 12373-8: NF EN 12373-8 (classification index: A 91-455-8) EN 12373-9: NF EN 12373-9 (classification index: A 91-455-9) EN 12373-10: NF EN 12373-10 (classification index: A 91-455-10) EN 12373-11: NF EN 12373-11 (classification index: A 91-455-11) EN 12373-12
11、: NF EN 12373-12 (classification index: A 91-455-12) EN 12373-13: NF EN 12373-13 (classification index: A 91-455-13) EN 12373-14: NF EN 12373-14 (classification index: A 91-455-14) EN 12373-15: NF EN 12373-15 (classification index: A 91-455-15) EN 12373-16: NF EN 12373-16 (classification index: A 91
12、-455-16) EN 12373-17: NF EN 12373-17 (classification index: A 91-455-17) EN ISO 1463: NF EN ISO 1463 (classification index: A 91-110) EN ISO 2360: NF EN ISO 2360 (classification index: A 91-113) EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12373-1 May 2001 ICS 25.220.20; 77.120.10 English ve
13、rsion Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium Aluminium et alliages daluminium - Anodisation - Partie 1: Mthode de spcification des caractristiques des revtements dcoratifs et protecteurs obtenus par
14、oxydation anodique sur aluminium Aluminium und Aluminiumlegierungen - Anodisieren - Teil 1: Methode zur Spezifizierung dekorativer und schtzender anodisch erzeugter Oxidschichten auf Aluminium This European Standard was approved by CEN on 20 April 2001. CEN members are bound to comply with the CEN/C
15、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any
16、CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN m
17、embers are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALIS
18、ATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12373-1:2001 E Page 2 EN 12373-1:2001 ContentsPage Foreword3 1Scope .5 2Normative refer
19、ences.5 3Terms and definitions7 4Information to be supplied by the purchaser to the anodizer.9 5Tests.12 6Coating thickness.12 7Quality of sealing.14 8Quality of cold impregnation.15 9Appearance and colour15 10Corrosion resistance 16 11Abrasion resistance16 12Resistance to cracking by deformation16
20、13Fastness to light and to ultraviolet radiation16 14Light reflection properties .17 15Electric breakdown potential.19 16Continuity of the coating.19 17Mass per unit area (surface density) of the coating.19 Annex A (informative) Guide to grades of aluminium for anodizing.20 Annex B (informative) Gui
21、dance on surface preparation22 Annex C (normative) Interpretation of average and local thickness requirements .24 Annex D (informative) Guidance on the choice of coating thickness class25 Annex E (informative) Guidance on cleaning materials for external architectural applications26 Bibliography27 Pa
22、ge 3 EN 12373-1:2001 Foreword This European Standard has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or
23、 by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn at the latest by November 2001. In this standard, annex C is normative and annexes A, B, D and E are informative. EN 12373, Aluminium and aluminium alloys Anodizing, comprises the following parts:
24、Part 1:Method for specifying decorative and protective anodic oxidation coatings on aluminium Part 2:Determination of mass per unit area (surface density) of anodic oxidation coatings Gravimetric method Part 3:Determination of thickness of anodic oxidation coatings Non-destructive measurement by spl
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NF EN 12373 2001 ENG
链接地址:https://www.31doc.com/p-3788354.html