NEMA-C81.63-2006.pdf
《NEMA-C81.63-2006.pdf》由会员分享,可在线阅读,更多相关《NEMA-C81.63-2006.pdf(132页珍藏版)》请在三一文库上搜索。
1、 ANSI_ANSLG C81.63-2006 Revision of ANSI C81.63-2005 American National Standard Gauges for Electric Lamp Bases and Lampholders -,-,- ANSI_ANSLG C81.632006 Revision of ANSI C81.63-2005 Copyright 2006 by American National Standard Lighting Group American National Standard Approved: August 1, 2006 Secr
2、etariat: American National Standard Lighting Group Gauges for Electric Lamp Bases and Lampholders An American National Standard implies a consensus of those substantially concerned with its scope and provisions. It is intended as a guide to aid the manufacturer, the consumer, and the general public.
3、 The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. Users are cautioned to obtain the latest editi
4、ons. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the Americ
5、an National Standards Institute. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American Natio
6、nal Standards may receive current information on all standards by calling or writing the American National Standards Institute. -,-,- ANSI_ANSLG C81.632006 Revision of ANSI C81.63-2005 Copyright 2006 by American National Standard Lighting Group Page 2 of 130 American National Standard Approval of an
7、 American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. An American National Standard implies a consensus of those substantially concerned with its scope and provisions. Cons
8、ensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and o
9、bjections be considered, and that a concerted effort be made toward their resolution. The existence of an American National Standard does not in any respect preclude anyone, whether s/he has approved the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or pro
10、cedures not conforming to the standards. It is intended as a guide to aid the manufacturer, the consumer, and the general public. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no p
11、erson shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Committee Secretariat referred to on the title page. CAUTION NOTICE: This American Nat
12、ional Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by
13、calling or writing the American National Standards Institute. Copyright 2006 by American National Standard Lighting Group All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher.
14、 Printed in the United States of America -,-,- ANSI_ANSLG C81.632006 Revision of ANSI C81.63-2005 Copyright 2006 by American National Standard Lighting Group Page 3 of 130 Table of Contents Foreword 4 Part I General Information and Requirements. 5 1 Scope 5 2 Normative references. 5 3 General inform
15、ation 5 Table 1 ANSI and IEC Lamp Base (Cap) Gauge Standard Sheets. 7 Table 2 ANSI and IEC Lampholder Gauge Standard Sheets 11 Part II ANSI Standard Sheets for Gauges for Bases (Caps) and Lampholders for Electric Lamps 16 Part III United States Deviations to IEC Harmonized Gauge Standard Sheets 128
16、Annexes Annex A Contrast of Projection Methods on Engineering Drawings 129 Annex B Related Standards 130 -,-,- ANSI_ANSLG C81.632006 Revision of ANSI C81.63-2005 Copyright 2006 by American National Standard Lighting Group Page 4 of 130 Foreword (This foreword is not part of American National Standar
17、d ANSI_ANSLG C81.63-2006) In 1990 and 1991 the American National Standards (ANS) for lamp bases, lampholders and gauges were split into three separate standards to line up with the IEC format. ANSI C81.61, ANS for Electric Lamp Bases paralleled IEC 60061-1; ANSI C81.62, ANS for Lampholders for Elect
18、ric Lamps paralleled IEC 60061-2 and ANSI C81.63, Gauges for Electric Lamp Bases and Lampholders paralleled IEC 60061-3. Also a fourth standard, ANSI C81.64 Guidelines for Electrical Lamp Bases, Lampholders and Gauges was published to parallel IEC 60061-4 in 1993. In 1996, the first IEC data sheets
19、were adopted “as is“ as Nationally Acknowledged International Standards and published as Supplement g to the existing C81.61, 62 and 63 standards. Now many more (if not most) ANSI gauge standard sheets are IEC sheets adopted as ANSI standards. In 2004, a revision and consolidation of ANSI C81.63 was
20、 issued to include, first, a reference to all IEC gauge standard sheets adopted as ANSI standards. Second, standard sheets for a small number of gauges used mainly in North America or not harmonized with IEC were found in Part II. Part III contained any United States deviations to the IEC standard s
21、heets, which had been adopted as Nationally Acknowledged International Standards as published in IEC 60061-3. Part IV contained an informative annex on first versus third angle projection and related standards. This standard is an update of the 2005 edition. Information concerning the approval of th
22、is standard is based on the documents listed in the table below: Amendment/change CDV RV Revision C81_1-5-10-11_2670 C81_1-5-10-11_2671 Anthony Tufano, Chairman, ASC C81 Randolph N. Roy, Committee Secretariat Matt Clark, Technical Editor/Coordinating Editor -,-,- ANSI_ANSLG C81.632006 Revision of AN
23、SI C81.63-2005 Copyright 2006 by American National Standard Lighting Group Page 5 of 130 PART I - General Information and Requirements 1 Scope This standard sets forth the specifications for gauges for bases (caps) and lampholders for electric lamps. 2 Normative references The following publications
24、 contain provisions which, through reference in this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this American National Standard are encouraged
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NEMA C81 63 2006
链接地址:https://www.31doc.com/p-3788688.html