JIS-Z-9362-1996-R2003-ENG.pdf
《JIS-Z-9362-1996-R2003-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-Z-9362-1996-R2003-ENG.pdf(20页珍藏版)》请在三一文库上搜索。
1、J IS JAPANESE INDUSTRIAL STANDARD Translated and Published by Japanese Standards Association (IS0 / IEC GUIDE 62 : 1996) General requirements for bodies operating assessment and certification/ registration of quality systems ICs 03.120.20 Descriptors : approval organizations, quality assurance, qual
2、ity assurance systems Reference number : JIS Z 9362 : 1996 (E) 11 s PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/16/2007 00:35:38 MDTNo reproduction or networking permitte
3、d without license from IHS -,-,- Z 9362 : 1996 (ISOAEC GUIDE 62 : 1996) Foreword This translation has been made based on the original Japanese Industrial Standard established by the Minister of International Trade and Industry through deliberations at the Japanese Industrial Standards Committee in a
4、ccordance with the Industrial Standardization Law. Date of Establishment: 1996-09-20 Date of Public Notice in Official Gazette: 1996-09-20 Investigated by: Japanese Industrial Standards Committee Divisional Council on Accreditation and Certification JIS Z 9362: 1996, First English edition published
5、in 2002-07 Translated and published by: Japanese Standards Association 4-1-24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the contents, the original JIS is to be the final authority. O JSA 2002 All rights reserved. Unless otherwise specified, no part of this p
6、ublication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Japan PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with
7、JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/16/2007 00:35:38 MDTNo reproduction or networking permitted without license from IHS -,-,- JAPANESE INDUSTRIAL STANDARD JI$ 2 9362 : 1996 (ISO/IEC GUIDE 62 : 1996) General requirements for bodies operating assessment and cert
8、ificatiodregistration of quality systems O Introduction 0.1 This Japanese Industrial Standard has been prepared based on the first edition of ISO/IEC GUIDE 62 General requirements for bodies operating assessment und certification /registration of quality systems published in 1996 without modifying t
9、he technical contents. Portions underlined with dots are the matters not stated in the original Guide. 0.2 Certificationhegistration of a suppliers quality system is one means of providing assurance that the certifiedhegistered supplier is capable of supplying products or services that meet specifie
10、d requirements. This Standard specifies requirements, the observance of which is intended to ensure that certificatiodregistration bodies operate third-party certificatiodregistration systems in a consistent and reliable manner, thereby facilitating their acceptance on a national and international b
11、asis. This Standard should serve as a foundation for the recognition of relevant national systems in the interests of international trade. This Standard is intended for use by bodies, however described, which carry out the functions of assessment and certification/registration of quality systems. Fo
12、r convenience of drafting, such bodies are referred to as “certification/registration bodies”. This wording should not be an obstacle to the use of this Standard by bodies with other designations which undertake activities which it covers. Indeed, this Standard should be usable by any body involved
13、in quality system assessment. The requirements contained in this Standard are written, above all, to be considered as general requirements for organizations operating quality system certification/ registration programmes, therefore the requirements may have to be supplemented when specific industria
14、l or other sectors (e.g. health and safety) make use of it. Quality system certificatiodregistration involves only the assessment of a suppliers quality system and not the certification of products, processes or services. Evidence of conformity to the appropriate quality system standard and any supp
15、lementary documentation will be in the form of a certification/registration document or a quality system certificate. While this Standard is intended for use by bodies concerned with recognizing the competence of certification/registration bodies, many provisions contained herein may be useful in se
16、cond-party assessment procedures. Notes 1 In some countries, the bodies which verify conformity of quality systems to specified standards are called “Certification bodies”, in others “registration bodies”, in others “assessment and registration bodies” or “certification/ registration bodies”, and in
17、 still others “registrars”. For ease of understanding, this Standard always refers to such bodies as “certification/ registration bodies”. This should not be understood to be limiting. Subclause 0.2 corresponds to Introduction of the original Guide. 2 PROTECTED BY COPYRIGHT Copyright Japanese Standa
18、rds Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/16/2007 00:35:38 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 Z 9362 : 1996 (ISO/IEC GUIDE 62 : 1996) Section 1: General 1.1 Scope This Standar
19、d specifies general requirements for a third-party body operating quality system certificationhegistration to meet if it is to be recognized as competent and reliable in the operation of quaiity system certificationhegistration. The requirements contained in this Standard are written, above all, to
20、be considered as general requirements for any body operating certification/registration of quality systems. 1.2 Normative references The following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard. ISO/IEC GUIDE 2:1991 General terms and th
21、eir definitions concerning IS0 8402: 1994 JIS Z 9901-1994 standardization and related activities Quality management and quality assurance-Vocabulary Quality systems-Model for quality assurance in design, development, production, installation and servicing Quality systems-Model for quality assurance
22、in production, installation and servicing Quality systems-Model for quality assurance in final inspection and test JIS Z 9902-1994 JIS Z 9903-1994 JIS Z 9911-1-1996 Guidelines for auditing quality systems-Part 1: Auditing JIS Z 9911-2-1996 Guidelines for auditing quality systems-Part 2: Qualificatio
23、n criteria for quality systems auditors 1.3 Definitions in ISO/IEC Guide 2 and I S 0 8402 and the following definitions apply. For the purposes of this Standard, the relevant definitions given 1.3.1 supplier: The party that is responsible for the product, process or service and is able to ensure tha
24、t quality assurance is exercised. This definition may apply to manufacturers, distributors, importers, assemblers, service organizations, etc. 1 . 3 . 2 certificatiodregistration body: A third party that assesses and certifies registers the quality system of suppliers with respect to published quali
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- JIS 9362 1996 R2003 ENG
链接地址:https://www.31doc.com/p-3788743.html