SAE-ARP-5602-3-2007.pdf
《SAE-ARP-5602-3-2007.pdf》由会员分享,可在线阅读,更多相关《SAE-ARP-5602-3-2007.pdf(17页珍藏版)》请在三一文库上搜索。
1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2007 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA)
4、 Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ARP5602/3 AEROSPACE RECOMMENDED PRACTICE Issued 2007-06 A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Knowledge Competencies RATIONALE The aerospace
5、 industry has always required the highest standards of workmanship to be maintained. To ensure that the aerospace fiber optics industry adopts these same high standards, its essential that minimum training and certification requirements be established. This document outlines the minimum training req
6、uirements for all personnel working as aerospace fiber optics fabricators in accordance with aerospace industry best practices. 1. SCOPE This document establishes training guidelines applicable to fiber optic fabricator technical training for individuals involved in the manufacturing, installation,
7、support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production Copyright SAE International Provided by IHS under license with SAELicensee=Defense Supply Ctr/59139
8、77001 Not for Resale, 12/04/2007 19:42:22 MSTNo reproduction or networking permitted without license from IHS -,-,- SAE ARP5602/3 - 2 - 2. APPLICABLE DOCUMENTS The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications shall apply. Th
9、e applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between the text of this document and references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws a
10、nd regulations unless a specific exemption has been obtained. 2.1 SAE Publications Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org. ARP5601 Guidelines for Testing and Support of
11、Aerospace, Fiber Optic, Inter-Connect Systems 2.2 ANSI Publications Available from American National Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642- 4900, www.ansi.org. ANSI Z136.1-200 American National Standard for Safe Use of Lasers ANSI Z136.2-1997 American Nation
12、al Standard for the Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources ANSI/TIA-440-B-2004 Fiber Optic Terminology 2.3 ARINC Publications Available from ARINC, 2551 Riva Road, Annapolis, MD 21401, . ARINC Report 806 Fiber Optic Installation and Maintenance Procedur
13、es 2.4 IEC Publications Available from International Electrotechnical Commission, 3, rue de Varembe, P.O. Box 131, 1211 Geneva 20, Switzerland, Tel: +44-22-919-02-11, www.iec.ch. IEC 60825-1 Laser Safety Equipment Classification (Safety of laser products) IEC 60825-2 Safety of Optical Fibre Communic
14、ation Systems IEC 60825-4 Laser Guards 2.5 NASA Publications Available from NASA, Documentation, Marshall Space Flight Center, AL 35812, www.nas.nasa.gov. NASA-STD-8739.5 Fiber Optic Terminations, Cable Assemblies, and Installation Copyright SAE International Provided by IHS under license with SAELi
15、censee=Defense Supply Ctr/5913977001 Not for Resale, 12/04/2007 19:42:22 MSTNo reproduction or networking permitted without license from IHS -,-,- SAE ARP5602/3 - 3 - 2.6 NAVAIR Publications Available from Commanding Officer, Naval Air Technical Data and Engineering Service Command, Naval Air Statio
16、n, North Island, P.O. Box 357031, Building 90, Distribution, San Diego, CA 92135-7031. NAVAIR 01-1A-505.4 Installation and Testing Practices Aircraft Fiber Optic Cabling 2.7 U.S. Government Publications Available from the Document Automation and Production Service (DAPS), Building 4/D, 700 Robbins A
17、venue, Philadelphia, PA 19111-5094, Tel: 215-697-6257, http:/assist.daps.dla.mil/quicksearch/. FED-STD-1037C Glossary of Telecommunications Terms MIL-PRF-29504B Termini, Fiber Optic Connector, Removable, General Specification for MIL-PRF-29504/4D Termini, Fiber Optic, Connector, Removable, Environme
18、ntal Resisting, Pin Terminus, Size 16, Rear Release, MIL-DTL-38999, Series III MIL-PRF-29504/5D Termini, Fiber Optic, Connector, Removable, Environmental Resisting, Socket Terminus, Size 16, Rear Release, MIL-DTL-38999, Series MIL-DTL-38999K Connectors, Electrical, Circular, Miniature, High Density,
19、 Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, General Specification for 2.8 Other Applicable References Understanding Fiber Optics, Jeff Hecht, ISBN 0-13-956145-5 Fiber Optics Installer and Technician Guide, Bill Wo
20、odward, ISBN 0-7821-4390-3 3. HOW TO USE THIS DOCUMENT This document is intended to be used as a guideline for all persons conducting aerospace fiber optics fabricator training. This training document is broken into 16 major categories. Each category contains detailed training competencies. The deta
21、iled training competencies describe the level of knowledge each student should have about that particular item. 1. INTRODUCTION TO AEROSPACE FIBER OPTICS 1.1 Explain the historical evolution of fiber optic technology 1.2 Explain the harsh environments of fiber optic technology in aeronautical and sp
22、ace applications 2. PRINCIPLES OF FIBER OPTIC TRANSMISSION 2.1 Describe the basic parts of a fiber optic link 2.2 Describe the basic operation of a fiber optic transmitter 2.3 Describe the basic operation of a fiber optic receiver 2.4 Describe how the decibel is used to compare relative power levels
23、 (dB) 2.5 Describe how the decibel is used to measure absolute power (dBm) Copyright SAE International Provided by IHS under license with SAELicensee=Defense Supply Ctr/5913977001 Not for Resale, 12/04/2007 19:42:22 MSTNo reproduction or networking permitted without license from IHS -,-,- SAE ARP560
24、2/3 - 4 - 3. SAFETY AWARENESS 3.1 Explain personnel and platform safety issues including foreign object damage (FOD) and equipment damage 3.2 Describe the best practices associated with the safe handling of fiber materials and hand tools 3.3 Describe how to properly dispose of fiber optic waste 3.4
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAE ARP 5602 2007
链接地址:https://www.31doc.com/p-3792962.html