SAE-AS-9685A-2003-R2007.pdf
《SAE-AS-9685A-2003-R2007.pdf》由会员分享,可在线阅读,更多相关《SAE-AS-9685A-2003-R2007.pdf(2页珍藏版)》请在三一文库上搜索。
1、400 Commonwealth Drive, Warrendale, PA 15096-0001 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use,
2、 including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. SHEET 1 OF 2 AS9685 REV. A THIRD AN
3、GLE PROJECTION AEROSPACE STANDARD AS9685 REV. A ISSUED 2000-08 REVISED 2003-06 REAFFIRMED 2007-06 (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL- CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A PREPARED BY SAE COMMITTEE E-25, GENERAL STANDARDS FOR AEROSP
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAE AS 9685 2003 R2007
链接地址:https://www.31doc.com/p-3793680.html