毕业设计(论文)-4000m3d针织印染废水的处理.doc
《毕业设计(论文)-4000m3d针织印染废水的处理.doc》由会员分享,可在线阅读,更多相关《毕业设计(论文)-4000m3d针织印染废水的处理.doc(84页珍藏版)》请在三一文库上搜索。
1、提供全套毕业论文,欢迎咨询 本科毕业设计(论文)题 目: 4000m3/d针织印染废水的处理 学 院: 化学工程学院 专 业: 环境工程 班 级: 1002051 学 号: 100205126 学生姓名: 指导教师: 职称: 讲 师 二一四 年 五 月 二十 日4000m3/d针织印染废水的处理设计总说明书1、设计原则: 严格遵守国家对环境保护及城市污水治理的有关规范、标准和规定;符合城镇总体规划原则和要求,并与城市道路、给水、防洪、环保、电力、近期建设等工程规划相协调;执行国家关于环境保护工作的方针政策,做到技术先进、成熟可靠、处理效果好、经济合理,在保证处理效果达标排放的前提下,应尽量节省
2、成本、节省用地、节约能源;工艺技术先进可靠、简单实用、高效节能、运行稳定、耐冲击负荷能力好,以方便维护管理; 因地制宜、合理布局、统一规划;环境美观、建筑简洁实用,工作环境舒适。2、设计标准:纺织染整工业水污染物排放标准(GB4287-2012)现有企业直接排放标准;室外排水设计规范(GB 50014-2006);3、参考资料:纺织染整工业水污染物排放标准(GB4287-2012)现有企业直接排放标准室外排水设计规范(GB 50014-2006)环境工程设计手册三废处理工程技术手册废水卷印染废水处理技术及典型工程(第二版)污水处理厂设计与运行给水排水设计手册(第二版)。The Design F
3、or A 4000 m3/d Dyeing and PrintingWastewater Treatment SystemTotal instruction of design1、 Design principle: Strictly comply with the national environmental protection and urban sewage treatment of the relevant norms, standards and regulations Comply with the general principles and requirements of u
4、rban planning and coordinated with urban roads, water supply, flood control, environmental protection, power, construction and other recent project planning. Implement the national strategies and policies on environmental protection work, to achieve advanced ,mature and reliable technology, good tre
5、atment effect and economical and reasonable price. In the premise of ensuring the treatment effect, do as much as possible to save costs, save space, save energy. Have advanced , reliable, simple and practical technology; energy efficient; good capacity to resist to shock loading, to facilitate the
6、maintenance and management.Unified planning,allocating the treatment plant rationally and combine the situation of the factory.With beautiful environmente , simple and practical construction, comfortable working environment.2、Design standard :Discharge standard of water pollutants for dyeing and fin
7、ishing of textile industry(GB4287-2012);Design specification of outdoor discharge water (GB 50014-2006).3、Principal technical data: Discharge standard of water pollutants for dyeing and finishing of textile industry(GB4287-2012);Design specification of outdoor discharge water (GB 50014-2006);Design
8、manual of the environmental engineering;Three wastes treatment engineering technical manual - waste water one;Treatment technologue and classic project for dyeing and printing waste water;Water treatment structures design and calculate;Design manual of water supply and discharge.4000m3/d针织印染废水的处理摘 要
9、本设计是根据纺织染整工业水污染物排放标准(GB4287-2012)中,现有企业直接排放标准要求,针对某整染厂产生的针织印染废水所进行的废水处理工艺系统的设计。本设计的进水水质为:COD2500 mg/L、BOD=800 mg/L、SS300mg/L、pH=69、色度700倍。通过对该整染厂废水水质水量特点的研究分析,参考其他印染废水处理方案中达到排放标准的典型工程实例,结合本设计的具体要求,采用以“混凝沉淀水解酸化好氧生化气浮”为主体的处理工艺。具体工艺流程为:格栅调节池混凝反应池混凝沉淀池水解酸化池接触氧化池二沉池气浮池出水。本设计的污水处理系统具有工艺成熟稳定、处理效果好、投资及运行费用低
10、、操作简单、管理方便的优点,是一种高效、经济的污水处理工艺。本设计将达到现有企业直接排放标准,即设计出水水质为:COD 100 mg/L、BOD 25 mg/L、SS 60 mg/L、PH69、色度70倍。污水处理系统占地面积约3600 m2,主体建筑深度37 m。经过成本核算,采用该工艺,吨水处理成本约为1.39元,总投资约为1467.175万元。关键词:印染废水;混凝;水解酸化;接触氧化;气浮The Design For A 4000 m3/d Dyeing and PrintingWastewater Treatment SystemABSTRACTThis is designed fo
11、r a dyeing and printing wastewater treatment plant, conforming to the direct emission standards of existing enterprises from (GB4287-2012).The water quality of the inflow is: COD = 2500 mg/L、BOD5 = 800 mg/L、SS = 300 mg/L、pH = 811、colourity = 700. Having analyzed the wastewater characteristics of tha
12、t factory and the concrete situation of this project,and having referred to some classic treatment project examples matching the discharge standard,this design adopts the treatment process based on“coagulationhydrolysis acidificationbiocontact axidationflotation” technology. The sewage treatment pro
13、cess is: screening conditioning tank coagulation pond primary sedimentation pond hydrolysis acidification pond biocontact oxidation pond secondary settling tank flotation tank. This is a kind of efficient and economic waste water treatment technique designed in the principle of using mature treatmen
14、t technique and process,circulation dependable,lowering the operation expenses and the operation management simple. It conforms to the direct emission standards of existing enterprises from (GB4287-2012). The quality of the effluent is designed as following: COD 100 mg/L、BOD5 25 mg/L、SS 60 mg/L、pH=
15、69、colourity 70. The treatment plant building area is about 3600 square meters. The main building is about 37 meters depth. It is estimated that the operation expense is RMB 1.39 Yuan/t and the total investment is RMB 1467175 Yuan. Key words:dyeing and printing wastewater; disposal system; coagulati
16、on;hydrolysis and acidification; biocontact axidation; flotation目 录1 综述1 1.1 课题综述1 1.1.1 印染厂概述1 1.1.2 设计原则1 1.1.3 设计依据1 1.1.4 设计数据2 1.2 印染废水处理工艺概述2 1.2.1 印染废水概述2 1.2.2 印染废水处理设计工艺比较52 污水处理工艺流程6 2.1 工艺流程6 2.2 工艺流程说明6 2.3 各单元处理效果83 处理构筑物设计计算10 3.1 格栅10 3.1.1 设计参数及要求10 3.1.2 设计计算10 3.2 调节池13 3.2.1 设计参数及
17、要求13 3.2.2 设计计算13 3.3 混凝剂投配及混合设备14 3.3.1 设计参数及要求14 3.3.2 设计计算14 3.4 混凝反应池15 3.4.1 设计参数及要求15 3.4.2 设计计算16 3.5 混凝沉淀池20 3.5.1 设计参数及要求20 3.5.2 设计计算20 3.6 水解酸化池25 3.6.1 设计参数及要求25 3.6.2 设计计算25 3.7 接触氧化池30 3.7.1 设计参数及要求30 3.7.2 设计计算30 3.8 二沉池33 3.8.1 设计参数及要求33 3.8.2 设计计算33 3.9 气浮池39 3.9.1 设计参数及要求39 3.9.2 设
18、计计算39 3.10 污泥浓缩池41 3.10.1 设计参数及要求41 3.10.2 设计计算41 3.11 贮泥池44 3.12 污泥脱水设备44 3.12.1 滚压带式压滤机44 3.12.2 附属设备45 3.13 巴氏计量槽464 污水处理厂总体布置48 4.1 平面布置48 4.1.1 布置原则48 4.1.2 总体布置48 4.2 管线布置48 4.3 高程布置49 4.3.1 布置原则49 4.3.2 计算方法49 4.3.3 高程计算50 4.3.3.1 污水处理构筑物高程计算50 4.3.3.2 污水部分高程计算525 设备选型55 5.1 设备型号及参数55 5.2 主要设
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 毕业设计 论文 4000 m3d 针织 印染 废水 处理
链接地址:https://www.31doc.com/p-3944825.html