《CW3系列智能型万能式断路器.pdf》由会员分享,可在线阅读,更多相关《CW3系列智能型万能式断路器.pdf(147页珍藏版)》请在三一文库上搜索。
1、CW 3 系列 智能型万能式断路器 CW3 SERIES INTELLIGENTAIR CIRCUIT- BREAKERS 常熟开关制造有限公司 (原常熟开关厂 ) CHANGSHU SWITCHGEAR MFG. CO.,LTD. (FORMER CHANGSHU SWITCHGEAR PLANT) 2014.05 S CV系列 CW系列 CM系列 CK系列CR系列CA系列 CJR系列CJD系列CD系列CH系列CE系列 CB系列 National Enterprise Technology Center Postdoctoral Technical Innovation Centre Nat
2、ional Innovative Pilot EnterprisePostdoctoral Programme StateT orch Plan Key High- tech Enterprise Certificate OfConformity For Measurement Management Systems Occupational Health And Safety Management System Certificate Environmental Management System Certificate Quality Management System Certificat
3、e Introduction 公司简介 常熟开关制造有限公司是国有资产参股的电器制造企业、“国家重点高新技术企 业”,占地约300亩,员工1685人。主要生产中低压电器元件、工控产品、太阳能光伏 逆变器、成套装置等,可以为您提供“智能配电系统三位一体完整的解决方案”。 公司建有博士后科研工作站、国家认定企业技术中心和江苏省电器控制工程中 心,具有一支以博士、硕士、本科生为主的多层次研发队伍,工程技术人员占企业员 工总数的50左右。公司拥有先进的模具制造、零部件自动化生产、断路器装配自动 检测流水线等一大批先进的制造和试验检测设备;实施以ERP管理为重点的信息化、 网络化管理;完善质量环境职业健
4、康安全体系,确保为用户提供优质、安全、可 靠的产品。CM系列塑料外壳式断路器、CW系列智能型万能式断路器曾双双被评为中 国名牌产品。 Changshu Switchgear Mfg. Co., Ltd. (Former Changshu Switchgear Plant), an enterprise with state- owned equity, coveredanareaof200,000m ,with 1685staffs,isa“National Key NewHigh-tech Enterprise“andmainlyproduces HV and LV electrical c
5、omponents, industrycontrolproducts,solar photovoltaicinverters and complete sets of equipment etc, all of which could provide trinity and complete solutions for intelligent power distribution system. Post -doctoralscientific researchstation,Province Enterprise TechniqueCenterandJiangsu Province Elec
6、trical Apparatus Control Engineering Research Center have been established and a multi- level professionaltechnique teamhasbeen formed consisting of PHD candidates, postgraduatesand university graduates. Engineers and technicians have covered 50% of all staffs. Advanced mould manufacturing equipment
7、s, automation producing equipments for spare parts, assembling and inspecting lines for breakers and test equipments have been brought in. Meanwhile, information and network management, taking ERP management as the focal point, has been applied and quality environmental systems (ISO9001/ISO14001/OHS
8、MS18001) have also been established and perfected to ensure reliability and safety for customers. CM Series Moulded Case Circuit Breaker and CW Series Intelligent Air Circuit Breaker are both China Top Brand products. 2 常熟开关制造有限公司 为您提供电气系统完整的解决方案 CV1-12系列 高压真空断路器 CV1-24系列 高压真空断路器 CV1-40.5系列 高压真空断路器
9、CV2-12系列 高压真空断路器 CW1系列 智能型万能式断路器 CW2系列 智能型万能式断路器 CW3系列 智能型万能式断路器 CM1系列 塑料外壳式断路器 CM2系列 塑料外壳式断路器 CM1 系列 电子式塑壳断路器 ECM1 系列 智能型可通信塑壳断路器 ZCM1 系列 带剩余电流保护塑壳断路器 L CM2Z系列 智能型塑壳断路器 CM2L系列 带剩余电流保护塑壳断路器 CM1 系列 带剩余电流保护 电子式塑壳断路器 EL CM3系列 塑料外壳式断路器 CW3V系列 智能型真空万能式断路器 CM5系列 塑料外壳式断路器 CM5Z系列 智能型塑壳断路器 CM5L系列 带剩余电流保护塑壳断路
10、器 CM5ZL系列 带剩余电流保护智能型塑壳断路器 CM5Z/iP系列 能量监测型智能塑壳断路器 CM5G系列 隔离开关 CM3E系列 电子式塑壳断路器 CM3L系列 带剩余电流保护塑壳断路器 CF1系列 变频器 常熟开关制造有限公司 为您提供电气系统完整的解决方案 CR1系列 电动机软起动器 CR2系列 智能型电动机软起动器 CS1G系列三相并网型 光伏发电逆变器 CW3G系列 隔离开关 (AC,DC) CM3DC系列 直流塑壳断路器 CH系列小型断路器 FCX3智能配电监控器Riyear-PowerNet配电监控系统 通信适配器 CN1DP-MP CN1DP-MD CN1DP-MC CN1
11、EG以太网 适配器 CE1系列 智能型电力仪表 CI1系列 远程智能I/O模块 FDM3 短消息通知模块 FWB1温度报警模块 CB1系列 控制和保护开关电器(CPS) CD4系列 智能马达保护器 CA1/CA1B系列自动 转换开关(CB级 ) CAP1系列自动 转换开关(PC级) CAP2系列自动 转换开关(PC级) CLJ3 剩余电流 动作继电器 CK3系列接触器 CJR3系列 热过载继电器 CJD3系列 电子过载继电器 CW3DC系列 直流万能式断路器 优秀特色 应用广泛,可适用于交流400V、690V,行业首推最大额定电流等级7400A断路器;并且 派生产品CW3G隔离开关交直流两用,
12、直流电压可达1000V,满足光伏发电应用,还具备 TH型断路器,满足湿热带地区使用要求 获得国际认可的CB证书 小体积、高性能,电能监测和保护控制一体化,功能完善 倡导断路器新理念,实现额定短时耐受能力Icw=额定运行短路分断能力 Ics=额定极限短路分断能力Icu,实现全电流范围选择性保护,提高运行可靠性 额定极限短路分断能力Icu:400V:65kA150kA;690V:50kA100kA 额定运行短路分断能力Ics:400V:55kA150kA;690V:42kA100kA 额定短时耐受电流Icw (1s):400V:50kA135kA;690V:42kA100kA 断路器可选配不同智能
13、控制器,实现更丰富的电力参数检测(如谐波监测、功率和电度 显示),测量精度高,可满足监测级要求;多种曲线保护,满足不同应用场合(如发电 机保护);率先推出带剩余电流保护(A型/AC型)的智能控制器 导入最先进的断路器状态智能化可视新理念,实现内部温度、附件、本体及抽屉座运行 状态的实时监测 全模块化设计理念,提供多种模块实现功能的扩展,如辅助触头可扩展至12组(最 多),可选装三位置状态监视等 主回路接线端子连接方便,可实现水平连接、垂直连接、混合连接,辅助触头数量可 选,增配方便 可选区域选择性联锁功能,确保各级保护的完全选择性 通过配置FDM3短消息通知模块,可实现断路器故障脱扣或报警信息
14、无线监视 可配FWB1温度报警模块,实现连接点在线超温报警 可选Modbus、Profibus、Devicenet、CAN任一协议直接通信输出,方便用户;并可通过本 公司的CN1EG以太网适配器联接以太网网络 目 录 R R 1 概 述 GENERAL 2 型号含义 TYPE DESIGATIONAND ITS MEANING 3 断路器结构简介 SYNOP OF STRUCTURE 6 主要技术指标 MAIN TECHNICALINDEX 11 智能控制器 INTELLIGENT CONTROLLER 35 附件 ACCESSORIES 49 高海拔降容 ALTITUDE DERATING
15、48 断路器功耗及降容系数 POWER LOSS AND DERATING COEFFICIENT OF BREAKER 49 抽屉式断路器主回路接线铜排规格参照表 REFERENCE TABLEOF MAIN CIRCUITWIRINGCOOPER BAR FORDRAW- OUTCIRCUITBREAKERS 72 断路器门框开孔尺寸 CUTOUT DIMENSIONS OF THE DOORFRAME 84 自动电源转换系统外形尺寸及安装尺寸 OUTLINE DIMENSIONS AND MOUNTINGDIMENSIONS OFAUTOMATIC POWER SUPPLY SWITCH
16、 SYSTEM 108 断路器订货规范 ORDERING FORM OF BREAKER 88 自动电源转换系统电气接线图 WIRING DIAGRAM OF THE AUTOMATIC POWER SUPPLY SYSTEM 78 附件外形尺寸和安装尺寸 OUTLINE DIMENSIONS AND MOUNTINGDIMENSIONS OFACCESSORIES 54 断路器外形尺寸及安装尺寸 OUTLINE DIMENSIONS AND MOUNTINGDIMENSIONS 50 自动电源转换系统 AUTOMATIC POWER SUPPLY SWITCH SYSTEM 2 正常使用条件
17、和安装条件 NORMAL SERVICEAND MOUNTING CONDITIONS 77 断路器安装安全间隙 MOUNTINGSAFETY CLEARANCE 86 断路器二次回路接线图 WIRING DIAGRAM OF THE BREAKER SECONDARY CIRCUIT 92 组网与监控 NETWORKING AND MONITORING 100 FWB1温度报警模块 TEMPERATUREALARM MODULE 通信元件及温度报警模块可选订货规范 ORDER FORMOFSELECTINGCOMMUNICATION COMPONENTAND TEMPERATUREALARM
18、INGMODULE 102 CW3-1600/CW3-2500断路器带剩余电流保护智能控制器说明 INTELLIGENTCONTROLLERINSTRUCTIONOFINCORPORATINGRESIDUALCURRENTFORCW3- 1600/CW3- 2500CIRCUITBREAKER 121 CW3系列无过电流保护断路器 CW3 SERIESBREAKERSNOTFULFILLINGTHEREQUIREMENTS FOROVERCURRENTPROTECTION 135 常熟开关制造有限公司(原常熟开关厂)又 全新推出CW家庭新成员CW3系列智能型万能式断 路器(以下简称断路器),该
19、断路器是本公司设 计人员把丰富的断路器研发经验、成熟的配电技 术与人性化设计相结合的新一代产品,断路器可 应用于各种低压配电领域,不但可实现对线路的 保 护 , 还 可 实 现 对 电 动 机 ( 断 路 器 满 足 GB50055对电动机保护要求)、发电机(断路器 满足GB755对发电机保护要求)等设备的保护, 因此为用户提供了更安全、更可靠、更全面的低 压配电保护方案。 断路器额定工作电压 AC50Hz/60Hz 400、 690V 断路器额定电流2007400A 断路器具有三极和四极 断路器具有抽屉式和固定式 断路器可倒进线连接 断路器可选用EN、EA、EP、EQ、EG等 智能控制器 断
20、路器具有隔离功能,符号为 使用类别B 可提供低温至-40断路器 可提供无过电流保护要求的断路器,符合 GB14048.2附录LCBI分类Y级 断路器符合以下标准: IEC60947-1及GB 14048.1-2006 低压开关设 备和控制设备 总则 IEC60947-2及GB 14048.2-2008 低压开关设 备和控制设备 断路器 IEC60947-4-1及GB 14048.4 低压开关设备和 控制设备 机电式接触器和电动机起动器 断路器获国家强制性产品认证CCC标志 1 Changshu Switchgear Manufacturing Co., LTD (Former Changshu
21、 Switchgear Plant) has developed CW3 Series Intelligent Air Circuit-Breakers (ACB) (hereafter simply referred to as circuit breakers) as the new member of the CW family, which are the new generation of products that combine the rich experience of circuit breakers rplease seeingpower consumption and
22、capacity lowering coefficient; Elevation over 2000m,the breakers are used by reducing capacity,please seeingcapacity-reducing for high-elevation . Storage condiction:ambient temperature -40 +70. ; ; ; 。 ; ( )、 “ ” ; ; The breaker is suitable in electromagnetic environment A; Damp heat typeTHbreakers
23、 are tested by GB/T2423.4GB/T2423.18,can bear the influence of moisturein the air of salt fog and oil fog or mould. - 40for EN intelligent controller () 、 ( “ ” ) 断路器结构简介 1 2 3 4 5 6 7 8 9 10 11 12 3 SYNOP OF STRUCTURE 合闸“I”、分闸“O”指示 合闸准备就绪时指示“OK” 抽屉式断路器“分离”位置安全挂锁装置 抽屉式断路器“分离”、“试验”、“连接 ”三位置“解锁拨钮” 抽屉式
24、断路器摇杆工作孔 抽屉式断路器“分离”、“试验”、“连接 ”三位置指示 抽屉式断路器摇杆存放孔 11 12 13 14 15 16 17 铭牌 贮能释能指示 合闸按钮 商标 手动贮能手柄 二次回路接线端子 断路器“分闸”锁定装置 脱扣指示和复位按钮 智能控制器 分闸按钮 1 2 3 4 5 6 7 8 10 9 1 Nameplate 2 Indications of charging and discharging 3 Closing button 4 Brand 5 Manual charging handle 6 Terminals of secondary circuit 7 “ope
25、ning” lock mechanism 8 Trip indication and resetting button 9 Intelligent controller 10Openingbutton 11Indication of closing (“I”) and opening (“O”) 12Indication of ready-for-close(“OK”) 13 Safety padlock mechanism as the draw-out circuit breaker indicates the position of “separated” 14 “Unlock butt
26、on“ of the three positions (“separated“, “test“ and “connected“) for draw-out circuit breaker 15 Rocker operating hole of the draw-out circuit breaker 16 Indications of the three positions (“separated“, “test“ and “connected“) of the draw-out circuit breaker 17Rocker storage hole of the draw-out cir
27、cuit breaker 1 2 3 4 5 6 7 8 9 10 11 12 1314151617 4 断路器结构简介 SYNOP OF STRUCTURE 注: 1“分离”:指示主回路与二次回路均为隔 离状态; “试验”:指示主回路为隔离状态,二次回 路为连接状态; “连接”:指示主回路与二次回路均为连接 状态。 2 当断路器本体被摇至“分离”或“试验” 或“连接”位置时即可被自动锁定(摇杆不可再 摇动),可通过向左拨动“解锁拨钮”解锁。 Note: 1 “Separated“: indicates that main circuit and secondary circuit are b
28、oth in isolation. “Test“: indicates that main circuit is in isolation and secondary circuit is in connection. “Connected“: indicates that main circuit and secondary circuit are both in connection. 2 The circuit breaker can be automatically locked (rocker can not be turned at this point) when its mai
29、n part is at the position of “separated“, “test“ or “connected“ by turning the rocker, and can be unlocked by pushing “unlock button“ to the left side. 5 抽屉式断路器的抽屉座 抽屉式断路器的抽屉座具有隔离主回路母排的挡板,当断路器抽出时起安全保护作用。 断路器结构简介 20 19 18 21 安装孔 安全挡板 二次回路接线端子 侧板 18 19 20 21 SYNOP OF STRUCTURE Draw-out socket of draw-
30、out circuit breaker The draw-out socket has the hack plate for isolating the copper bar of the main circuit, which takes the role of safety protection when the circuit breaker is draw out. 18Installation hole 19Safetyback plat 20Wiringterminals of secondary circuit 21Side plate AC400V AC400V AC690V
31、AC690V 50/1s,55/0.5s 42/1s 全分断时间(无附加延时)(ms)2530 闭合时间(ms) 最大70 6500 3000 15000 30000 外形尺寸(mm) WHD 3P 3P 3P 3P 248 248 351.5 351.5 297 297 4P 4P 4P 4P 318 318 351.5 351.5 297 297 259 259 320 320 195 195 329 329 320 320 195 195 极数 中性极额定电流I (A)N 3、4 100%In AC400V AC400V 65 AC690V AC690V 50 AC400V55 AC69
32、0V42 143 105 6 主要技术指标 CW3-1600 1600 额定电流In(A)200、400、630、800、1000、1250、1600 AC50Hz/60Hz,400690、额定电压Ue(V)工作 额定绝缘电压Ui(V)1000 额定冲击耐受电压Uimp(kV)12 3500 常 熟 开 关 制 造 有 限 公 司 复位 W D MAIN TECHNICAL INDEX 型号 Type designation 壳架等级额定电流Inm(A) Frame size rated current Rated current Rated operational voltage Rated
33、 insulation voltage Rated impulse withstand voltage 工频耐受电压U(V) Power-frequency withstand voltage Pole number Rated current of neutral pole 额定极限短路分断能力Icu(kA)(有效值) Rated ultimate short-circuit breaking capacity (r.m.s value) 额定运行短路分断能力Ics(kA)(有效值) Rated service short-circuit breaking capacity (r.m.s v
34、alue) 额定短路接通能力Icm(kA)(峰值) Rated short-circuit making capacity (peak value) 额定短时耐受电流Icw(kA)(有效值) Rated short-time withstand current(r.m.s value) Full-breaking time (without additional delay) Closing time 电气寿命*times(次) Electrical durability 机械寿命*times(次) Mechanical durability 宽高深 Widthheightdepth 免维护
35、Non-maintenance 有维护 Maintenance Outline dimensions 水平连接 Horizontal 水平连接 Horizontal 垂直连接 Vertical 垂直连接 Vertical 抽屉式 Draw-out 固定式 Fixed 后置 后置 后置 后置 后置 后置 后置 后置 Back set Back set Back set Back set Back set Back set Back set Back set Max 注:、断路器具有电动机保护型,其。 注:根据,术语“寿命”表示电器在修理或更换部件前能完成的操作循环次数的概率。 In=200A40
36、0A630A800A1000AUe=400V *GB14048.1-2006 Note:Motor protection type of breakers,whose rated current(In)isequal to 200A400A630A800A1000A and rated operational voltage(Ue)is equal to 400V,will be available. *Note:For GB14048.1-2006, the term “durability“expresses the expectancy of the number of operatin
37、g cycles which can be performed by the equipment before repair or replacement parts. 、 7 主要技术指标 CW3-2500 2500 额定电流In(A)630、800、1000、1250、1600、2000、2500 AC400V AC690V 全分断时间(无附加延时)(ms)2530 闭合时间(ms) 8000 2500 12500 25000 WHD 3P 3P 3P 4P 4P 4P 143 121 65 55 187 143 85 65 347 442 347 442 362 457 438 438
38、438 438 395 395 395 395 395 395 290 290 H 极数 中性极额定电流I (A)N 3500 3、4 100%In AC400V AC690V AC400V AC690V AC400V AC690V AC400V AC690V M短路分断能力级别 65 55 85 65 65 55 85 65 额定绝缘电压Ui(V) 1000 额定冲击耐受电压Uimp(kV)12 额定电压Ue(V)工作 外形尺寸(mm) 常 熟 开 关 制 造 有 限 公 司 复位 W D Rated current Rated operational voltage Rated insul
39、ation voltage Rated impulse withstand voltage Pole number Rated current of neutral pole Short circuit breaking capacity Full-breaking time (without additional delay) Closing time 免维护 Non-maintenance 有维护 Maintenance 宽高深Widthheightdepth Outline dimensions 抽屉式 Draw-out 水平连接 Horizontal 垂直连接 Vertical 固定式
40、 Fixed 水平连接 Horizontal 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set MAIN TECHNICAL INDEX 最大70 Max 电气寿命times(次) Electrical durability 机械寿命times(次) Mechanical durability 额定短时耐受电流Icw(kA)(有效值)/1s Rated short-time withstand current(r.m.s value) 额定短路接通能力Icm(kA)(峰值) Rated short-circuit
41、 making capacity (peak value) 额定运行短路分断能力Ics(kA)(有效值) Rated service short-circuit breaking capacity (r.m.s value) 额定极限短路分断能力Icu(kA)(有效值) Rated ultimate short-circuit breaking capacity (r.m.s value) 型号 Type designation 壳架等级额定电流Inm(A) Frame size rated current 工频耐受电压U(V)Power-frequency withstand voltage
42、 注:、断路器具有电动机保护型,其。In=630A800A1000AUe=400V Note:Motor protection type of breakers,whose rated current(In)isequal to 630A800A1000A and rated operational voltage(Ue)is equal to 400V,will be available. 、 AC50Hz/60Hz,400690、 AC400V AC690V AC400V AC400V AC690V AC690V 全分断时间(无附加延时)(ms) 2530 闭合时间(ms) 2000 15
43、00 10000 20000 WHD 3P 3P 3P 4P 4P 4P 187 165 85 75 220 187 100 85 401 514 401 514 414 527 438 438 438 438 395 395 395 395 395 395 290 290 H 极数 中性极额定电流I (A)N 3500 3、4 100%In AC400V AC690V M短路分断能力级别 85 75 100 85 AC400V AC690V 85 75 100 85 8 额定绝缘电压Ui(V)1000 额定冲击耐受电压Uimp(kV)12 主要技术指标 CW3-4000 4000 额定电流I
44、n(A) 额定电压Ue(V)工作 10001250160020002500 2900320036004000 、 、 常 熟 开 关 制 造 有 限 公 司 复位 W D Rated current Rated operational voltage Rated insulation voltage Rated impulse withstand voltage Pole number Rated current of neutral pole Short circuit breaking capacity Full-breaking time (without additional dela
45、y) 宽高深Widthheightdepth 外形尺寸(mm) Outline dimensions 免维护 Non-maintenance 有维护 Maintenance Closing time 抽屉式 Draw-out 水平连接 Horizontal 垂直连接 Vertical 固定式 Fixed 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set 水平连接 Horizontal MAIN TECHNICAL INDEX 最大70 Max 型号 Type designation 壳架等级额定电流Inm(A)
46、Frame size rated current 工频耐受电压U(V) Power-frequency withstand voltage 额定短时耐受电流Icw(kA)(有效值)/1s Rated short-time withstand current(r.m.s value) 额定短路接通能力Icm(kA)(峰值) Rated short-circuit making capacity (peak value) 额定运行短路分断能力Ics(kA)(有效值) Rated service short-circuit breaking capacity (r.m.s value) 额定极限短路
47、分断能力Icu(kA)(有效值) Rated ultimate short-circuit breaking capacity (r.m.s value) 电气寿命times(次) Electrical durability 机械寿命times(次) Mechanical durability AC50Hz/60Hz,400690、 主要技术指标 CW3-6300 6300 额定电流In(A) 400050006300、 AC400V AC690V 全分断时间(无附加延时)(ms)2530 闭合时间(ms) 1500 1000 6500 13000 WHD 3P 3P 3P 4P 4P 4P
48、264 187 120 85 297 220 135 100 754 980 754 980 769 995 475.5 475.5 475.5 475.5 395 395 395 395 395 395 290 290 H 极数 中性极额定电流I (A)N 3500 3、4 100%In AC400V AC690V AC400V AC690V AC400V AC690V AC400V AC690V M短路分断能力级别 120 85 135 100 120 85 135 100 额定绝缘电压Ui(V) 1000 额定冲击耐受电压Uimp(kV)12 额定电压Ue(V) 外形尺寸(mm) 常 熟
49、 开 关 制 造 有 限 公 司 复位 W D Rated current Rated operational voltage Rated insulation voltage Rated impulse withstand voltage Pole number Rated current of neutral pole Short circuit breaking capacity Full-breaking time (without additional delay) Closing time 免维护 Non-maintenance 有维护 Maintenance 宽高深Widthheightdepth Outline dimensions 抽屉式 Draw-out 水平连接 Horizontal 垂直连接 Vertical 固定式 Fixed 水平连接 Horizontal 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set 后置Back set MAIN TECHNICAL INDEX 最大70
链接地址:https://www.31doc.com/p-5529793.html