BS PAS 130-2007 人造纳米颗粒和包含人造纳米颗粒产品的标注指南1.pdf
BS EN 868-9-2000 消毒医疗装置和包装材料.用于生产热密封袋,卷轴和盖的聚烯烃非包覆非织物材料.要求和试验方法.pdf
BS EN 957-7-1999 固定的训练设备.划艇机械补充的特殊安全要求和试验方法.pdf
BS EN 868-4-2009 第4部分 纸纸袋1.pdf
BS EN 988-1997 锌和锌合金.建筑用轧制平板材规范.pdf
BS EN 868-4-2009 第4部分 纸纸袋.pdf
BS EN 867-4-2001 消毒器用非生物系统.蒸汽渗透性检测用Bowie和Dick试验的替换用指示器的规范.pdf
BS EN 847-3-2004 Tools for woodworking — Safety requirements — Part 3 Clamping devices.pdf
BS EN-10246-8-2000 钢管的无损试验.径向缺陷探测用电焊钢管焊缝的自动超声试验.pdf
BTLA介导的负调共刺激信号对混合淋巴细胞反应抑制的研究.pdf
BS EN 957-9-2003 固定的训练器材.椭圆训练器材.附加的特殊安全要求和试验方法.pdf
BS EN 933-7-1998 集料的几何特性试验.动物碎壳含量的测定.粗集料中动物碎壳的百分率1.pdf
BS EN 983-1996+A1-2008 机械安全.液力系统及其部件的安全要求.气压装置.pdf
大班安全着火逃生教案反思.doc
BS PD CR 13935-2000 无损检验.普通的NDE数据格式模型.pdf
BS EN 957-5-1997 固定的训练器材.踏板转动训练器材.补充的特殊安全要求和试验方法.pdf
灰色人生价值观ppt模板.pptx
BS PAS 132-2007 生物纳米接口用术语.pdf
BS EN 933-1-1997 集料的几何特性试验.粒度分布测定.筛法.pdf
BS EN 855-1997 热塑料织物增强液力型塑料软管和软管组件规范.pdf
BS EN 868-5-2009 第5部分 可封口的纸塑袋1.pdf
BS EN 838-1996 工作场所的空气.测定气体和水蒸汽用的扩散取样器.要求和试验方法.pdf
BS EN 868-9-2009 灭菌医疗装置的包装.聚烯烃非包覆非织物材料.要求和测试.pdf
BS EN 868-1-1997 Packaging materials and systems for medical devices which are to be sterilized Part 1. General requirements and test methods.pdf
BS EN 859-1998 木工机械安全.手动表面刨平机械.pdf
BS EN 868-6-2009 灭菌医疗装置的包装.低温灭菌处理用纸.要求和测试方法.pdf
BS EN 866-6-2000 Biological systems for testing sterilizers and sterilization processes Part 6 Particular systems for use in dry heat sterilizers.pdf
BS EN 842-1996+A1-2008 机械安全.视觉损害信号.一般要求,设计和试验.pdf
BS EN 868-2-2009 灭菌医疗装置的包装.灭菌套要求和测试方法.pdf
BS EN 860-1997 木工机械的安全.单面去厚度刨床.pdf
BS PAS 1188-2-2009 防洪制品.规范-.临时制品.pdf
BS EN 81-71-2005 电梯建造和安装的安全规则.客用和客货两用电梯的特殊装置.防美观被破坏的电梯.pdf
BS EN 933-11-2009 聚合体的几何性质试验.粗再生聚合体成分的分类试验.pdf
BS EN 792-12-2000 手持非电动工具.安全要求.小圆盘锯、小摆锯和往复式锯.pdf
BS EN 622-3-2004 Fibreboards — Specifications — Part 3 Requirements for medium boards1.pdf
BS EN 62007-1-2009 Semiconductor optoelectronic devices for fibre optic system applications — .pdf
BS PD 6505-1982 朝鲜字的罗马字体书写指南.pdf
BS EN 820-3-1995 Advanced technical ceramics — Methods of testing monolithic ceramics — Thermomechanical properties1.pdf
火红的枫叶有内容中国风语文教学课件PPT课件范本.pptx
BS EN 933-7-1998 集料的几何特性试验.动物碎壳含量的测定.粗集料中动物碎壳的百分率.pdf
BS EN 9131-2009 Aerospace series — Quality management systems — Nonconformance documentation.pdf
BS EN 873-1997 轻型物料运送带.主要特性和应用.pdf
BS EN 868-10-2000 消毒医疗装置和包装材料.用于生产热密封袋,卷轴和盖的聚烯烃胶粘包覆非织物材料.要求和试验方法.pdf
BS EN 866-3-1997 Biological systems for testing sterilizers and sterilization processes Part 3. Particular systems for use in moist heat sterilizers.pdf
BS EN 933-8-1999 集料几何特性的试验.细集料的评定.含沙当量试验.pdf
BS EN 868-6-1999 Packaging materials and systems for medical devices which are to be.pdf
BS EN 857-1997 橡胶软管和软管配件 液压设备用金属丝编织增强压制型 规范.pdf
BS EN 866-5-2000 Biological systems for testing sterilizers and sterilization processes Part 5 Particular systems for use in low temperature steam.pdf
BS EN 818-3-1999 升降用的短节链条.安全.吊链用中等公差链条.4级.pdf
BS EN 812-1997+A1-2001 Industrial bump caps.pdf
大班安全电梯里有只大熊猫教案.doc
BS EN 866-4-2000 Biological systems for testing sterilizers and sterilization processes Part 4 Particular systems for use in irradiation sterilizers.pdf
大班安全生活中的防盗教案.doc
BS EN 840-3-2004 Mobile waste containers — Part 3 Containers with 4 wheels with a capacity up to 1 300 l with.pdf
BS EN 818-5-1999 升降用的短节链条.安全.链式吊锁链.4级.pdf
BS EN 877-1999 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证.pdf
BS EN 865-1997 pulse oximeters-particular requirements1.pdf
BS EN 868-10-2009 灭菌医疗装置的包装.聚烯烃粘性涂覆非织物材料.要求和测试方法.pdf
BS EN 821-1-1995 Advanced technical ceramics — Monolithic ceramics — Thermo-physical properties.pdf
BS EN 850-1997 可移动的储气瓶.医用枢接轭状阀门出口接头.pdf
大班安全玩火真危险,我们不玩火教案反思.doc
BS EN 851-1996 Aluminium and aluminium alloys — Circle and circle stock for the production of culinary utensils — Specifications.pdf
BS EN 818-4-1997 起重用短扁节链条.安全性.第4部分 8质量等级止档链.pdf
BS EN 837-1-1998 压力计.波登压力计.规格,计量,要求和试验1.pdf
BS EN 818-7-2002 升降用的短节链条.安全.链式吊索.精密公差吊链、等级T(类型T、—AT和 —T)1.pdf
BS EN 826-1996 建筑用绝热产品 压缩性测定.pdf
BS EN 814-1-1997 Air conditioners and heat pumps with electrically driven compressors Cooling mode Part 1. Terms, definitions and designations.pdf
BS EN 812-1998 工业防护帽.pdf
BS EN 843-1-1995 Advanced technical ceramics — Monolithic ceramics — Mechanical properties at room temperature.pdf
BS EN 820-2-2003 Advanced technical ceramics — Methods of testing monolithic ceramics — Thermo-mechanical properties.pdf
BS EN 868-8-1999 经消毒医疗设备用包装材料和系统.符合EN 285的蒸汽消毒器用可重复使用的消毒容器.要求和试验方法.pdf
BS EN 771-4-2003 砌块规范 第4部分 热处理过的加气混凝土砌块1.pdf
BS EN 854-1997 橡胶管及管配件.纺织增强液压型.规范.pdf
BS EN 756-2004 welding consumable solid wires,solid wire-flux and tubular cored electrode-flux combinations for submerged are welding of.pdf
BS EN 61784-3-2008 工业通信网络.轮廓.功能安全现场总线.一般规则和轮廓定义.pdf
BS EN 61558-2-12-2001 Safety of power transformers, power supply units and similar devices — Part 2-12 Particular requirements for constant voltage transformers1.pdf
BS PAS 124-2008 定义、实施和管理网站标准最优方法的综述.pdf
BS EN 815-1996 钻岩石用无掩蔽的隧道掘进设备和无杆轴钻进设备的安全性1.pdf
BS EN 975-1-2009 Sawn timber — Appearance grading of hardwoods Part 1 Oak and beech.pdf
BS EN 858-1-2002 Separator systems for light liquids (e.g. oil and petrol) — Part 1 Principles of product design, performance.pdf
BS EN 8491-2008 Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain othe.pdf
BS EN 933-2-1995 集料的几何性能试验.颗粒尺寸和分布的定义.筛分试验,小孔的通用尺寸1.pdf
BS EN 858-2-2003 Separator systems for light liquids (e.g. oil and petrol) — Part 2 Selection of nominal size, installation, operation and maintenance1.pdf
BS EN 840-3-2004 Mobile waste containers — Part 3 Containers with 4 wheels with a capacity up to 1 300 l with1.pdf
BS EN 840-6-2004+A1-2008 移动式废品箱.安全和健康要求.pdf
大班安全独自在家教案反思.doc
BS EN 817-2008 Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications.pdf
BS EN 809-1998 pumps and pump units for liquids-common safety requiremnts.pdf
BS EN 837-1-1998 压力计.波登压力计.规格,计量,要求和试验.pdf
BS EN 792-13-2000 手持非电动工具.安全要求.紧固件旋具.pdf
BS EN 817-2008 Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications1.pdf
BS EN 759-1997 焊接消耗品.焊接用填充金属的交货技术条件.包括产品型式、尺寸、公差和标志.pdf
湘教版二年级语文课件范本PPT-那只松鼠.pptx
BS EN 813-1997 防止坠落的个人保护装置.坐骑用带状装置.pdf
BS EN 818-1-1996 提升目的用的短扁节链条.安全.验收的一般条件.pdf
BS EN 81-70-2003 电梯的建造和安装的安全规则.载客及客货两用电梯的特殊应用.电梯对包括残疾人在内的所有人员的可达性.pdf
BS EN 793-1998 医疗供应设备安全的特殊要求.pdf
BS EN 764-2-2002 压力设备 第2部分 量、符号和单位.pdf
大班安全煤气开关不乱动教案反思.doc
BS EN 858-2-2003 Separator systems for light liquids (e.g. oil and petrol) — Part 2 Selection of nominal size, installation, operation and maintenance.pdf
BS EN 816-1997 卫生间水龙头旋塞装置.自动切断阀 PN 10.pdf
BS EN 840-5-2004 Mobile waste containers — Part 5 Performance requirements and test methods.pdf
BS EN 792-7-2001 手持非电动工具.安全要求.研磨机.pdf
BS EN 81-1-1998+A3-2009 升降机的建造和安装的安全规则.电梯.pdf
BS EN 790-2001 内河运输船.45°至60°倾斜角楼梯.要求与类型.pdf
BS EN 754-4-1996 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 4 Square bars, tolerances on dimensions and form.pdf
BS EN 772-3-1998 砖石结构的试验方法.流体静态称重法对粘土砖石结构的孔隙百分率和净体积的测定.pdf
BS EN 814-2-1997 Air conditioners and heat pumps with electrically driven compressors Cooling mode Part 2. Testing and requirements for marking.pdf
BS EN 806-1-2000 Specification for installations inside buildings conveying water for human.pdf
BS EN 818-2-1997 升降用短节链.安全.第2部分 吊链用中等公差链条.8号1.pdf
BS EN 754-6-1996 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 6 Hexagonal bars, tolerances on dimensions and form.pdf
BS EN 810-1997 带电动压缩机的减湿器.考核试验,标记和操作要求及技术数据表.pdf
BS EN 747-1-2007 Furniture — Bunk beds and high beds for domestic use Part 1 Safety, strength and durability requirements1.pdf
BS EN 61439-1-2009 低压开关设备和控制设备.总则.pdf
渐变背景绘画培训PPT模板.pptx
BS EN 61249-4-17-2009 印制板和其它互连结构用材料.无铅装配用规定了燃烧性的无卤环氧化物编织E玻璃纤维预浸料(垂直燃烧法).pdf
湘教版三年级上册语文PPT课件范本-国徽.pptx
BS EN 809-1998 pumps and pump units for liquids-common safety requiremnts2.pdf
七年级第二学期数学期中试题(含答案).doc
BS EN 792-8-2001+A1-2008 手持非电动工具.安全要求.砂轮机和抛光机.pdf
BS EN 818-7-2002 升降用的短节链条.安全.链式吊索.精密公差吊链、等级T(类型T、—AT和 —T).pdf
七年级(上)数学竞赛试题(无答案).doc
BS EN 764-4-2002 Pressure equipment — Part 4 Establishment of technical delivery conditions for metallic materials.pdf
BS EN 81346-2-2009 工业系统、装置和设备及工业产品.构成原理和参考命名.对象分类和分类代码.pdf
BS EN 792-10-2000+A1-2008 手持非电动工具.安全要求.压制动力工具.pdf
BS EN 81-28-2003 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and.pdf
BS EN 755-5-1996 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles — Part 5 Rectangular bars, tolerances on dimensions and form.pdf
BS EN 792-7-2001+A1-2008 手持非电动工具.安全要求.研磨机.pdf
BS EN 867-1-1997 Non-biological systems for use in sterilizers Part 1. General requirements.pdf
BS EN 792-11-2000 手持非电动工具.安全要求.步冲轮廓机和剪床.pdf
BS EN 754-8-1998 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 8 Porthole tubes, tolerances on dimensions and form.pdf
BS EN 772-9-1998 砖石结构的试验方法.通过添加盐对硅酸盐砖净体积和孔隙百分率体积的测定.pdf
BS EN 736-1-1995 阀门术语.阀门类型定义.pdf
BS EN 772-4-1998 砖石结构的试验方法.天然石砖结构开放孔隙度和集块总密度的测定.pdf
BS EN 856-1997 软管和软管组件.橡胶包覆螺形线增强液压型.规范.pdf
BS EN 779-2002 一般通风用空气颗粒过滤器.过滤性能测定.pdf
BS EN 764-5-2002 PRESSURE EQUIPMENT — PART 5 COMPLIANCE AND INSPECTION DOCUMENTATION OF MATERIALS.pdf
BS EN 792-11-2000+A1-2008 手持非电动工具.安全要求.步冲轮廓机和剪床.pdf
BS EN 752-4-1998 室外建筑物的排水系统.液压设计和环境考虑.pdf
大班安全火的用途及危害教案反思.doc
大班安全火的危害教案反思.doc
BS EN 818-6-2000 提升用短扁节链条.安全.链式吊索.生产商提供的使用和维护的信息规范.pdf
BS EN 764-5-2002 Pressure Equipment — Part 5 Compliance and Inspection Documentation of Materials1.pdf
BS EN 730-1-2002 Gas welding equipment — Safety devices — Part 1 Incorporating a flame (flashback) arrestor.pdf
BS EN 761-1995 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes Determination of the creep factor under dry conditions.pdf
BS EN 777-1-1999 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1 System —, safety.pdf
BS EN 755-6-2008 Aluminium and aluminium alloys - Extruded rodbar, tube and profiles.pdf
BS EN 710-1998 Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment.pdf
BS EN 777-4-1999 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4 System H, safety.pdf
BS EN 755-2-1997 EN 铝和铝合金 挤压棒料、条料、管材和外形 第二部分 机械性能.pdf
BS EN 792-12-2000+A1-2008 手持非电动工具.安全要求.小圆盘锯、小摆锯和往复式锯.pdf
BS EN 733-1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket — .pdf
七年级数学(上)第三单元测试卷.doc
BS EN 771-6-2005 Specification for masonry units. Natural stone masonry units.pdf
BS EN 61158-4-8-2008 工业通讯网络.现场总线规范.数据链层协议规范.8型元件.pdf
大班安全火教案反思.doc
BS EN 777-3-2009 Multi-Burner Gas-Fired Overhead Radiant Tube Heater Systems for Non Domestic Use - Part 3 System F - Safety.pdf
BS EN 764-7-2002 压力设备 第7部分 不着火的压力设备的安全系统1.pdf
BS EN 764-1-2004 Pressure equipment Part 1 Terminology — Pressure,temperature, volume.pdf
BS EN 755-8-1998 Aluminium and aluminium alloys Extruded rodbar, tube and profiles Part 8 Porthole tubes, tolerances on dimensions and form.pdf
BS EN 752-7-1998 Drain and sewer systems outside buildings. Maintenance and operations.pdf
七年级数学(上)第三单元测试1卷.doc
BS EN 763-1995 Plastics piping and ducting systems — Injection-moulded thermoplastics.pdf
BS EN 720-1-1999 Transportable gas cylinders Gases and gas mixtures Part 1 Properties of pure gases.pdf
BS EN 840-1-2004 Mobile waste containers — Part 1 Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design.pdf
BS EN 755-6-1996 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles — Part 6 Hexagonal bars, tolerances on dimensions and form.pdf
大班安全游泳抽筋怎么办教案.doc
BS EN 771-4-2003 砌块规范 第4部分 热处理过的加气混凝土砌块.pdf
BS EN 738-2-1999 Pressure regulators for use with medical gases Part 2 Manifold and line pressure regulators.pdf
清新风人教版五年级桂花雨PPT课件.pptx
大班安全活动:电梯里的大熊猫.doc
大班安全火灾时如何保护自己教案反思.doc
BS EN 755-3-2008 Aluminium and aluminium alloys - Extruded rodbar, tube and profiles.pdf
BS EN 764-3-2002 pressure equipment Part 3 Definition of parties involved.pdf
BS EN 706-1996+A1-2009 农业机械.葡萄蔓翻转机的安全.pdf
大班安全活动:雷响时别出去.doc
清新课件培训教育培训PPT模板.pptx
BS EN 713-1995 塑料管道系统.配件和聚烯烃压力管的机械接合.弯曲时组件内部压力密封性的试验方法.pdf
BS EN 754-7-1998 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 7 Seamless tubes, tolerances on dimensions and form.pdf
BS EN 754-2-1997 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 2. Mechanical properties.pdf
清新读书分享PPT模板.pptx
BS EN 754-3-1997 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 3 Round bars, tolerances on dimensions and form.pdf
BS EN 739-1998 Low-pressure hose assemblies for use with medical gases.pdf
BS EN 752-1-1996 Drain and sewer systems outside building.pdf
BS EN 755-9-2001 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles — Part 9 Profiles, tolerances on dimensions and form.pdf
BS EN 736-3-1999 Valves — Terminology — Part 3 Definition of terms.pdf
BS EN 792-13-2000+A1-2008 手持非电动工具.安全要求.紧固件旋具.pdf
七年级数学第一学期期中质量检测.doc
BS EN 772-2-1998 砖石结构的试验方法.集料混凝土砖石结构孔隙面积百分率的测定.pdf
BS EN 754-1-1997 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 1. Technical conditions for inspection and delivery.pdf
BS EN 741-2000 Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials.pdf
BS EN 751-1-1997 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Part 1.pdf
bs en 755-3-1996 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles — Part 3 Round bars, tolerances on dimensions and form.pdf
BS EN 745-1999+A1-2009 农业机械.旋转割草机和连枷安全.pdf
BS EN 752-2-1996 Drain and sewer systems outside building.pdf
BS EN 746-1-1997 Industrial thermoprocessing equipment Part 1. Common safety requirements for industrial thermoprocessing equipment.pdf
清新蓝卡通风格游泳暑假班招生PPT模板.pptx
BS EN 736-2-1997 Valves Terminology Part 2. Definition of components of valves.pdf
BS EN 755-9-2008 Aluminium and aluminium alloys - Extruded rodbar, tube and profiles.pdf
BS EN 747-1-2007 Furniture — Bunk beds and high beds for domestic use Part 1 Safety, strength and durability requirements.pdf
BS EN 725-8-1997 Advanced technical ceramics Methods of test for ceramic powders Part 8. Determination of tapped bulk density.pdf
BS EN 729-1-1995 Quality requirements for welding Fusion welding of metallic materials — Part 1 Guidelines for selection and use.pdf
BS EN 71-2-2003 Safety of toys — Part 2 Flammability1.pdf
大班安全活动:尖利的东西会伤人.doc
七年级数学竞赛试题2.doc
BS EN 764-1-2004 PRESSURE EQUIPMENT PART 1 TERMINOLOGY — PRESSURE,TEMPERATURE, VOLUME1.pdf
BS EN 755-3-2008 Aluminium and aluminium alloys - Extruded rodbar, tube and profiles1.pdf
bs en 754-5-1996 Aluminium and aluminium alloys — Cold drawn rodbar and tube — Part 5 Rectangular bars, tolerances on dimensions and form.pdf
BS EN 725-9-1997 Advanced technical ceramics Methods of test for ceramic powders Part 9. Determination of untamped bulk density.pdf
BS EN 746-8-2000 Industrial thermoprocessing equipment Part 8 Particular safety requirements for quenching equipment.pdf
BS EN 71-1-1998 Safety of toys Part 1 Mechanical and physical properties.pdf
BS EN 685-2007 Resilient textile and laminate floor coverings - Classification.pdf
BS EN 752-2008 建筑物外部排水和污水系统.pdf
BS EN 747-2-2007 Furniture — Bunk beds and high beds for domestic use Part 2 Test methods.pdf
BS EN 737-4-1998 Medical gas pipeline systems Part 4 Terminal units for anaesthetic gas scavenging systems.pdf
BS EN 755-4-1996 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles — Part 4 Square bars, tolerances on dimensions and form.pdf
BS EN 682-2002 Elastomeric seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids1.pdf
BS EN 734-1995 Side channel pumps PN 40 — Nominal duty point, main dimensions, designation system.pdf
BS EN 707-1999 农业机械.淤泥槽.安全性.pdf
BS EN 725-12-2001 Advanced technical ceramics — Methods of test for ceramic powders — Part 12 Chemical analysis of zirconia.pdf
BS EN 647-1994 Paper and board intended to come into contact with foodstuffs — .pdf
BS EN 752-5-1998 室外建筑物的排水系统.修复.pdf
BS EN 71-11-2005 Safety of toys. Organic chemical compounds. Methods of analysis.pdf
BS EN 683-2-1997 Aluminium and aluminium alloys -Finstock Part 2. Mechanical properties.pdf
七年级数学竞赛试题.doc
大班安全活动教案:马路安全教案.doc
BS EN 759-1997 焊接消耗品.焊接用填充金属的交货技术条件.包括产品型式、尺寸、公差和标志1.pdf
BS EN 755-1-1997 Aluminium and aluminium alloys — Extruded rodbar, tube and profiles Part 1. Technical conditions for inspection and delivery.pdf
BS EN 725-9-1997 Advanced technical ceramics Methods of test for ceramic powders Part 9. Determination of untamped bulk density1.pdf
七年级数学期中练习卷.doc
BS EN 737-3-2000 Medical gas pipeline systems Part 3 Pipelines for compressed medical gases and vacuum.pdf
BS EN 729-3-1995 Quality requirements for welding Fusion welding of metallic materials — Part 3 Standard quality requirements.pdf
BS EN 71-8-2003 Safety of toys.Part8 Swings, slides and similar activity toys for indoor and outdoor family domestic use.pdf
BS EN 731-1996 Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests.pdf
BS EN 671-1-2001 固定式灭火系统.水龙带系统.具有半刚性水龙带的卷筒.pdf
七年级数学科目期中考试测试题(含答案).doc
大班安全活动教案:高处危险我不跳教案(附教学反思).doc
BS EN 730-2-2002 Gas welding equipment — Safety devices — Part 2 Not incorporating a flame (flashback) arrestor.pdf
BS EN 723-2009 铜和铜合金.铜管道和接头的内表面积碳测定的燃烧方法.pdf
BS EN 725-5-1996 Advanced technical ceramics Methods of test for ceramic powders Part 5. Determination of the particle size distribution.pdf
BS EN 71-4-1998 玩具的安全.化学和相关活性的试验设备.pdf
BS EN 71-2-2006 玩具的安全性.玩具的易燃性.pdf
BS EN 703-2004+A2-2010 农业机械.青贮饲料装载,混合和或铡碎及分配机械安全性.pdf
BS EN 658-2-2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room temperature1.pdf
BS EN 71-10-2005 Safety of toys.Organic chemical compounds. Sample preparation and extraction.pdf
BS EN 677-1998 Gas-fired central heating boilers Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW.pdf
大班安全活动教案:骑自行车教案.doc
BS EN 716-2-2008 Furniture — Children’s cots and folding cots for domestic use — Part 2 Test methods.pdf
BS EN 725-3-1994 Advanced technical ceramics — Methods of test for ceramic powders — Part 3 Determination of the oxygen content.pdf
七年级数学下学期测试卷.doc
清新绿色卡通风教育业幼儿教育通用PP课件.pptx
七年级数学下期末综合测试题4.doc
BS EN 738-3-1999 Pressure regulators for use with medical gases — Part 3 Pressure regulators integrated with cylinder valves.pdf
BS EN 708-1997 Agricultural machinery — Soil working machines with powered tools —Safety.pdf
大班安全活动教案:马路安全教案(附教学反思).doc
BS EN 747-2-2007 Furniture — Bunk beds and high beds for domestic use Part 2 Test methods1.pdf
BS EN 693-2001 Machine tools — Safety — Hydraulic presses.pdf
BS EN 657-1994 Thermal spraying — Terminology, classification.pdf
BS EN 71-2-2006+A1-2007 玩具的安全性.玩具的易燃性.pdf
BS EN 71-2-2003 Safety of toys — Part 2 Flammability.pdf
BS EN 658-5-2002 Advanced technical ceramics Mechanical properties of ceramic composites at room temperature.pdf
七年级数学下期末综合测试题2.doc
BS EN 671-3-2000 固定式灭火系统.水龙带系统.具有半刚性水龙带的带盘的维修.pdf
BS EN 71-2-1994, BS 5665-2-1994 Safety of toys — Part 2 Flammability.pdf
BS EN 723-1996 Copper and copper alloys Combustion method for determination of carbon on the inner surface of copper tubes or fittings.pdf
BS EN 705-1995 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and.pdf
BS EN 706-1997 Agricultural machinery Vine shoot tipping machines - Safety.pdf
BS EN 62448-2009 多媒体系统和设备.多媒体的电子出版和电子图书.电子出版的通用格式.pdf
BS EN 693-2001+A1-2009 机床的安全性.液压机.pdf
BS EN 683-1-1996 Aluminum and aluminium alloys-Finstock Part 1. Technical conditions for inspection and delivery.pdf
BS EN 676-2003+A2-2008 气体燃料用自动强制送风燃烧器.pdf
BS EN 712-1995 热塑管道系统.压力管和配件之间端部承载的机械接合.在恒定径向力下抗拔出性能的试验方法.pdf
BS EN 681-3-2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications.pdf
BS EN 635-5-1999 Plywood -Classification by surface appearance Part 5 Methods for measuring and expressing characteristics and defects.pdf
BS EN 701-1995 一般用途纤维绳索 总规范.pdf
BS EN 626-2-1996 Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery.pdf
七年级数学下期末综合测试题1.doc
BS EN 629-2-1996 Transportable gas cylinders 25E taper thread for connection of valves to gas cylinders Part 2. Gauge inspection.pdf
BS EN 62305-3-2006 Protection against lightning — Part 3 Physical damage to structures and life hazard.pdf
BS EN 636-3-1997 Plywood- Specifications Part 3. Requirements for plywood for use in exterior conditions.pdf
BS EN 706-1996+A1-2009 农业机械.葡萄蔓翻转机的安全1.pdf
大班安全活动教案:食物的旅行教案(附教学反思).doc
BS EN 669-1998 Resilient floor coverings. Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity.pdf
BS EN 676-2003 Automatic forced draught burners for gaseous fuels.pdf
大班安全活动教案:饮水安全教案.doc
BS EN 62281-2004 运输途中原电池和二次锂电池及蓄电池组的安全.pdf
大班安全活动教案:马路上的红绿灯教案.doc
大班安全活动教案:食物安全教案.doc
BS EN 638-1995 Plastics piping and.pdf
七年级数学下学期期末模拟试卷1(北师大).doc
BS EN 695-2005 厨房洗涤池.连接尺寸.pdf
BS EN 692-2005+A1-2009 机床.机械压力.安全.pdf
BS EN 62267-2009 铁路设施.都市自动化有轨运输(AUGT).安全要求.pdf
BS EN 658-3-2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room1.pdf
BS EN 624-2000 Specification for dedicated LPG appliances Room sealed LPG space heating equipment for installation in vehicles and boats.pdf
清新绿色通用教育教学培训ppt模板.pptx
BS EN 683-3-1997 Aluminium and aluminium alloys - Finstock Part 3. Tolerances on dimensions and form.pdf
大班安全活动教案:食品安全教案.doc
BS EN 658-2-2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room temperature.pdf
BS EN 632-1996 农业机械.联合收割机和饲料收割机的安全性.pdf
七年级数学下学期期末模拟试卷2.doc
BS EN 658-5-2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room temperature.pdf
BS EN 642-1995 包括接头、配件和管道预应力钢特殊要求的圆柱型和非圆柱型预应力混凝土压力管.pdf
大班安全活动教案:食品教案.doc
七年级数学下学期期中考试试题1.doc
BS EN 656-2000 Gas-fired central heating boilers Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW.pdf
BS EN 626-1-1995 Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery.pdf
七年级数学上学期单元1.3有理数的加减法试卷(二).doc
BS EN 71-1-2005+A9-2009 玩具的安全.机械及物理性能.pdf
BS EN 648-2006 预期与食品接触的纸和纸板.荧光增白的纸和纸板色牢度的测定.pdf
七年级数学下学期期中考试试题.doc
BS EN 635-3-1995 Plywood — Classification by surface appearance — Part 3 Softwood.pdf
BS EN 625-1996 Gas-fired central heating boilers — Specific requirements for the domestic hot water operation.pdf
BS EN 690-1995 Agricultural machinery — Manure spreaders — Safety.pdf
BS EN 636-2003 Plywood — Specifications.pdf
BS EN 636-1-1997 Plywood - Specifications Part 1. Requirements for plywood for use in dry conditions.pdf
BS EN 62134-1-2009 光纤互连设备和无源元件.光纤外封壳体.一般规范.pdf
BS EN 62305-1-2006 Protection against lightning — Part 1 General principles.pdf
BS EN 62386-207-2009 数字可寻址灯光接口.控制装置的特殊要求.LED模型(设备类型6).pdf
清新简约PPT模板.pptx
BS EN 62271-110-2009 High-voltage switchgear and controlgear — Part 110 Inductive load switching.pdf
七年级数学上册第三章单元检测.doc
BS EN 62074-1-2009 光纤互连器件和无源元件.光纤WDM设备.总规范.pdf
七年级数学上册第一章达标检测卷(含答案).doc
BS EN 62320-2-2008 Maritime navigation and radiocommunication equipment and systems — Automatic identification system (AIS) — Part 2.pdf
BS EN 659-2003 Protective gloves for firefighters.pdf
BS EN 622-3-2004 Fibreboards — Specifications — Part 3 Requirements for medium boards.pdf
BS EN 635-2-1995 Plywood — Classification by surface appearance — Part 2 Hardwood.pdf
大班安全活动教案:预防传染病教案(附教学反思).doc
BS EN 62114-2001 Electrical insulation systems (EIS) - Thermal classification2.pdf
BS EN 61800-5-1-2007 Adjustable speed electrical power drive systems — Part 5-1 Safety requirements — Electrical, thermal and energy1.pdf
BS EN 631-2-1999 Materials and articles in contact with foodstuffs Catering containers Part 2 Dimensions of accessories and supports.pdf
BS EN 61800-7-302-2008 可调速电驱动设备.电驱动设备轮廓的一般接口和使用.2型轮廓映射到网络技术.pdf
BS EN 623-1-1995 Advanced technical ceramics — Monolithic ceramics General and textural properties — Part 1.pdf
BS EN 62220-1-3-2008 Medical electrical equipment.pdf
BS EN 62035-2000 Discharge lamps (excluding fluorescent lamps) - Safety specifications.pdf
大班安全活动教案:食品安全我懂得教案.doc
BS EN 62134-1-2009 光纤互连设备和无源元件.光纤外封壳体.一般规范2.pdf
BS EN 629-1-1996 Transportable gas cylinders 25E taper thread for connection of valves to gas cylinders Part 1. Specification.pdf
BS EN 634-1-1995 Cement-bonded particle boards — Specification — Part 1 General requirements.pdf
BS EN 619-2002 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads.pdf
BS EN 62439-1-2010 工业通讯网络.高可靠性自动化网络.一般概念和计算方法.pdf
BS EN 623-3-1993 Advanced technical ceramics — Monolithic ceramics — General and textural.pdf
BS EN 62271-205-2008 High-voltage switchgear and controlgear — Part 205 Compact switchgear.pdf
BS EN 62040-2-2006 Uninterruptible power systems (UPS) — Part 2 Electromagnetic compatibility.pdf
BS EN 62271-105-2003 High-voltage switchgear and controlgear. Alternating current switch-fuse combinations.pdf
BS EN 622-1-2003 纤维板.要求.第1部分一般要求.pdf
BS EN 61995-2-2009 家用和类似用途灯具的连接设备.DCL用标准清单.pdf
清新简约培训课件PPT模板.pptx
BS EN 622-5-2006 Fibreboards — Specifications — Part 5 Requirements for dry process boards (M—F).pdf
BS EN 62271-1-2008 高压开关装置和控制装置.通用规范.pdf
BS EN 62024-2-2009 High frequency inductive components — Electrical characteristics and measuring methods —Part 2 Rated current of inductors for DC to DC.pdf
BS EN 61810-1-2004 机电式初等继电器 一般和安全要求.pdf
BS EN 62149-2-2009 光纤有源组件和设备.性能标准.850 nm离散垂直空腔表面发射激光设备.pdf
BS EN 61606-1-2009 音频和视听设备.数字音频部分.音频特性的基本测量方法.总则1.pdf
清新简约蓝绿色新学期工作计划安排动态模板.pptx
BS EN 658-3-2002 Advanced technical ceramics — Mechanical properties of ceramic composites at room.pdf
BS EN 62209-1-2006 Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3.pdf
BS EN 62031-2008 一般照明用发光二极管(LED)模块.安全规范.pdf
BS EN 61558-2-4-2009 电源电压≤1100V变压器,电抗器,电源和类似产品的安全性.绝缘变压器及与绝缘变压器结合的电源的特殊要求和试验.pdf
七年级数学上册华师版期末达标测试卷.doc
BS EN 623-5-2009 先进技术陶瓷.单片陶瓷的一般和结构特性.利用显微图像评估法测定相体积分数.pdf
BS EN 61995-2-2009 家用和类似用途灯具的连接设备.DCL用标准清单1.pdf
BS EN 61784-5-10-2008 工业通讯网络.剖面图.现场总线的安装.CPF 10用安装剖面图.pdf
BS EN 61779-1-2000 可燃性气体的检测和测量用电气装置.一般要求和试验方法1.pdf
BS EN 62137-1-5-2009 Surface mounting technology — Environmental and endurance test methods for surface mount solder joints — Part 1-5 Mechanical shear fatigue test.pdf
BS EN 62134-1-2009 光纤互连设备和无源元件.光纤外封壳体.一般规范1.pdf
BS EN 61557-12-2008 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring.pdf
BS EN 61988-3-2-2009 等离子体显示板.接口.电气接口.pdf
BS EN 61857-21-2009 电绝缘系统.热评估程序.通用模式的具体要求.线绕应用技术.pdf
BS EN 62137-1-3-2009 Surface mounting technology — Environmental and endurance test methods for surface mount solder joint — Part 1-3 Cyclic drop test.pdf
BS EN 61310-2-2008 机械安全.指示、标记和传动作用.标记要求.pdf
BS EN 61535-2009 固定装置中永久性连接用安装联接装置.pdf
BS EN 61800-5-1-2007 Adjustable speed electrical power drive systems — Part 5-1 Safety requirements — Electrical, thermal and energy.pdf
BS EN 62114-2001 Electrical insulation systems (EIS) - Thermal classification1.pdf
BS EN 61558-2-19-2001 Safety of power transformers, power supply units and similar devices — Part 2-19 Particular requirements for perturbation attenuation transformers.pdf
BS EN 61753-021-6-2008 Fibre optic interconnecting devices and passive components performance standard — Part 021-6.pdf
BS EN 62114-2001 Electrical insulation systems (EIS) - Thermal classification.pdf
BS EN 61800-7-202-2008 可调速电驱动设备.电驱动设备轮廓的一般接口和使用.2型轮廓规范.pdf
BS EN 61800-7-1-2008 可调速电力传动系统.通用接口和电力驱动系统断面的使用.接口定义.pdf
BS EN 61784-3-3-2008 工业通讯网络.剖面图.功能安全数据总线.CPF 3用附加规范.pdf
BS EN 61779-1-2000 可燃性气体的检测和测量用电气装置.一般要求和试验方法.pdf
BS EN 61773-1997 架空线.结构基础试验.pdf
BS EN 61557-4-2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 4.pdf
BS EN 61558-1-2005+A1-2009 电力变压器,电源装置,电抗器及类似设备的安全.一般要求和试验.pdf
BS EN 61300-3-6-2009 光学纤维互连器件和无源元件.基本测试和测量程序.检查和测量.回波损失.pdf
BS EN 61310-3-1999 Safety of machinery-Indication, marking and actuation- Part 3 Requirements for the location and operation of actuators.pdf
清新毕业答辩教学总结教学课件培训课件教育培训PPT模板.pptx
BS EN 62132-3-2007 Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Bulk current injection (BCI) method.pdf
BS EN 631-1-1993 Catering containers — Part 1 Specification for dimensions of containers.pdf
BS EN 62282-6-200-2008 燃料电池技术.微型燃料电池电源系统.性能试验方法.pdf
BS EN 61800-7-304-2008 可调速电驱动系统.电力传动系统用剖面图的使用和通用接口.4型剖面图映射到网络技术.pdf
BS EN 61784-3-6-2008 工业通讯网络.剖面图.功能安全数据总线.CPF 6用附加规范.pdf
大班安全活动教案:防盗教案.doc
BS EN 61988-2-3-2009 等离子体显示器.测量方法.图像质量.退化和缺陷.pdf
BS EN 61755-3-7-2009 光学纤维互连器件和无源元件.纤维光学连接器的接口,光学接口以钛作为纤维包覆材料的单模纤维2.5 mm及1.25 m.pdf
BS EN 61558-2-20-2001 Safety of power transformers, power supply units and similar devices — Part 2-20 Particular requirements for small reactors.pdf
BS EN 61534-22-2009 Powertrack systems — Part 22 Particular requirements for powertrack systems intended for on floor or under floor installation.pdf
BS EN 61558-2-9-2003 Safety of power transformers, power supply units and similar products.pdf
BS EN 61558-2-1-1998 Safety of power transformers, power supply units and similar-Part 2.1 Particular requirements for separating transformers for general use.pdf