BS-EN-ISO-11600-2003.pdf

BRITISH STANDARD BS EN ISO 11600:2003 Building construction Jointing products Classification and requirements for sealants The European Standard EN ISO 11600:2003 has the status of a British Standard ICS 91.100.50 ? Incorporating Corrigendum No. 1 BS EN ISO 11600:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 December 2003 ISBN 0 580 43050 2 National foreword The UK participation in its preparation was entrusted to Technical Committee B/547, Sealants for building and construction, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 to 8, two Annex ZA pages, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. This British Standard is the official English language version of EN ISO 11600:2003. It is identical with ISO 11600:2002. It supersedes BS ISO 11600:2002, BS 4254:1983, BS 5215:1986 and BS 5889:1989, which are withdrawn. © BSI 2006 Amendments issued since publication Amd. No. DateComments 15975 Corrigendum No. 1 31 July 2006Revision of supersession details EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 11600 November 2003 ICS 91.100.50 English version Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002) Construction immobilière - Produits pour joints - Classification et exigences pour les mastics (ISO 11600:2002) Hochbau - Fugendichtstoffe - Einteilung und Anforderungen von Dichtungsmassen (ISO 11600:2002) This European Standard was approved by CEN on 25 September 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels © 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11600:2003 E I NESO 11:0062003 (E) 2 Foreword The text of ISO 11600:2002 has been prepared by Technical Committee ISO/TC 59 “Building construction” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11600:2003 by CMC. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest by May 2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11600:2002 has been approved by CEN as EN ISO 11600:2003 without any modifications. NOTE Normative references to International Standards are listed in Annex ZA (normative). EN ISO 11600:2003 INTERNATIONAL STANDARD ISO 11600 Second edition 2002-10-01 Reference number ISO 11600:2002(E) © OSI 2002 Building construction Jointing products Classification and requirements for sealants Construction immobilière Produits pour joints Classification et exigences pour les mastics EN ISO 11600:2003 ISO :00611(2002)E ii© ISO 2002 Ar llithgr seresvde FDP dicslaimre This FDP fam elitnoc yt deddebme niayfep.seca In roccatiw ecnadA hycilop gnisnecil s'ebod, thf sim eliarp eb ytnieiv ro dewb detu sllah ton eb tidesselnu de tt ehyfepseca hwich rae meil era deddebct desneo tsni dnalat no delmoc ehtupre epfrromign tide ehti.gn In odaolnwt gnidhis file, rapticca setpe trehiet neh serilibisnopty fo ton fniris'ebodA gnign ilop gnisnecilcy. TI ehSO tneCraceS lrteraiat catpecon s illibaity in this aera. ebodA si t armedarak fo dAS ebotsysme Inroctarop.de teDailfo s tfos ehtware prtcudos t desuo crtaet ehFDP si ff eb nac elit ni dnuoG ehlarene Info talerive to tf eh;eli teh PDF-rctaerap noimateers weer tpof dezimior rptnii.gn vErec yaeeb sah ert nakt neo rusnet etah tf ehi elis tiusbaf elob esu ry ISO merebm seidob. In the kilnuley evtne ttah a borpmel talerign to ti f si,dnuo saelpfni eorm teh tneCS laretercratai ta thserdda es igvne olebw. © ISO 2002 Ar llieser sthgrvsselnU .de torehceps esiwfi,dei rap ont iht fos bupliactim noarper eb yro decudo tuzilina ni dey form b roy nasnaem y, tcelernahcem ro cinoicla, inclidung tohppocoying m dnaicrfomli, tiwtuoh permini noiss wrtif gnirmo ietI rehSO ta tserdda eheb slow or SIs'O memreb ydob in toc ehtnury fo tr ehtseuqeer. ISO copyrithg fofiec tsop esaCael 65 G 1121-HCeneva 02 Te.l + 22 14 10 947 11 Fax + 14 47 2290 9 74 E-liam copyrightsio.ch Web wwwsi.oc.h 3002:00611 OSI NEEN ISO 11600:2003 ISO 06112002:0)E( © ISO 2002 r llAithgs reservde iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 11600 was prepared by Technical Committee ISO/TC 59, Building construction, Subcommittee SC 8, Jointing products. This second edition cancels and replaces the first edition (ISO 11600:1993), clauses 7 and 8 of which have been technically revised. 3002:00611 OSI NEEN ISO 11600:2003 3002:00611 OSI NEEN ISO 11600:2003 ANRETNIITOTS LANDNADRAISO 06112002:0)E( © ISO 2002 r llAithgs reservde 1 Building construction Jointing products Classification and requirements for sealants 1Scope This International Standard specifies the types and classes of sealants used in building construction according to their applications and performance characteristics. The requirements and respective test methods for the different classes are also given. 2Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 6927, Building construction Jointing products Sealants Vocabulary ISO 7389, Building construction Jointing products Determination of elastic recovery of sealants ISO 7390, Building construction Jointing products Determination of resistance to flow of sealants ISO 8339, Building construction Sealants Determination of tensile properties (Extension to break) ISO 8340, Building construction Sealants Determination of tensile properties at maintained extension ISO 9046, Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature ISO 9047, Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures ISO 10563, Building construction Jointing products Determination of change in mass and volume of sealants ISO 10590, Building construction Jointing products Determination of tensile properties of sealants at maintained extension after immersion in water ISO 10591, Building construction Jointing products Determination of adhesion/cohesion properties of sealants after immersion in water ISO 11431:2002, Building construction Jointing products Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass ISO 11432, Building construction Jointing products Determination of resistance to compression of sealants ISO 13640, Building construction Jointing products Specifications for test substrates 3002:00611 OSI NEEN ISO 11600:2003 ISO :00611(2002)E 2© ISO 2002 Ar llithgr seresvde 3Terms and definitions For the purposes of this International Standard, the terms and definitions given in ISO 6927 apply. 4Classification 4.1Types According to their applications, sealants are separated into two types: Type G: glazing sealants for use in glazing joints; Type F: construction sealants for use in building joints other than glazing. 4.2Classes Sealants are classified according to their ability to fulfil sealing functions in joints with movement parameters as given in Table 1. 4.3Subclasses 4.3.1Sealants of class 25 and 20 are additionally sub-classified according to their secant tensile modulus (see ISO 6927): low modulus: code LM; high modulus: code HM. If the measured secant tensile modulus value exceeds the values specified below for either or both temperatures, the sealant shall be classified as high modulus. Specified values (see Tables 2 and 3, second row) are as follows: at ; at . The secant modulus shall be the mean value of the three measured values. Round the mean value to one decimal place. EXAMPLEMeasured values , and . Mean value . Reported value . Table 1 Sealant classes Classa Test amplitudeMovement capabilityb 2525,0 2020,0 12,512,5 7,57,5 a Classes 25 and 20 apply to both types of sealant G and F, while classes 12,5 and 7,5 apply to sealants of type F only. b For the correct interpretation and application of movement capability to the design of joints, relevant national standards and advisory documents should be considered. % ±25 ±20 ±12,5 ±7,5 0,4 N/mm2+23 C 0,6 N/mm220 C 0,43 N/mm20,40 N/mm20,46 N/mm20,43 N/mm20,4 N/mm2 3002:00611 OSI NEEN ISO 11600:2003 ISO 06112002:0)E( © ISO 2002 r llAithgs reservde 3 4.3.2Sealants of class 12,5 are additionally classified according to their elastic recovery: Sealants of classes 25, 20 and 12,5E are called elastic sealants; sealants of classes 12,5P and 7,5P are called plastic sealants. The full classification scheme is shown in Figure 1. 5Requirements and test methods The requirements and test methods are as specified in Tables 2 and 3 for Type G and Type F sealants respectively. For specific test conditions, see Table 4. elastic recovery equal to or more than :Code E (elastic); elastic recovery less than :Code P (plastic). Figure 1 Diagram of classification of sealants in building construction 40 % 40 % 3002:00611 OSI NEEN ISO 11600:2003 ISO :00611(2002)E 4© ISO 2002 Ar llithgr seresvde Table 2 Requirements for glazing sealants (G) Properties Class Test method 25LM25HM20LM20HM Elastic recovery (ISO 7389 Tensile properties, secant tensile modulus ISO 8339 at () andorandor at () Tensile properties at maintained extensionnfnfnfnfISO 8340 Adhesion/cohesion properties at variable temperaturenfnfnfnfISO 9047 Adhesion/cohesion properties after exposure to heat and artificial light and to water (see Note 1) nfnfnfnfISO 11431 Adhesion/cohesion properties at maintained extension after water immersion nfnfnfnfISO 10590 Resistance to compression () see Note 2 see Note 2 see Note 2 see Note 2 ISO 11432 Loss of volume ()ISO 10563 Resistance to flow () (see Note 3)ISO 7390 nf = no failure as defined in clause 7. NOTE 1Use the standard conditions of exposure, as described in ISO 11431:2002, 8.2.2 or 8.2.3. NOTE 2Record the value for compression. NOTE 3Use the U-profile, made from anodized aluminium, with a nominal width of and a nominal depth of . Apply test temperatures of and . Test to procedure A and procedure B. If the flow exceeds , the test may be repeated once. %)?60?60?60?60 +23 C N/mm2 ?0,44?0,44 20 C N/mm2 ?0,60,6?0,60,6 N/mm2 %?10?10?10?10 mm?3?3?3?3 20 mm10 mm (50±2) C (5±2) C 3 mm 3002:00611 OSI NEEN ISO 11600:2003 ISO 06112002:0)E( © ISO 2002 r llAithgs reservde 5 Table 3 Requirements for construction sealants (F) Properties Class Test method 25LM25HM20LM20HM12,5E12,5P7,5P E