BS EN 1525-1998 工业货车的安全-无驾驶员货车及其系统.pdf
《BS EN 1525-1998 工业货车的安全-无驾驶员货车及其系统.pdf》由会员分享,可在线阅读,更多相关《BS EN 1525-1998 工业货车的安全-无驾驶员货车及其系统.pdf(20页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1525:1998 Incorporating Amendment No. 1 Safety of industrial trucks Driverless trucks and their systems The European Standard EN 1525:1997 has the status of a British Standard ICS 53.060 BS EN 1525:1998 This British Standard, having been prepared under the direction of the Eng
2、ineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 January 1998 BSI 06-1999 ISBN 0 580 28954 0 National foreword This British Standard is the English language version of EN 1525:1997, published by the European Committee for Standardization (CE
3、N). The UK participation in its preparation was entrusted to Technical Committee MHE/7, Industrial trucks, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the U
4、K interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally incl
5、ude an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “ International Standa
6、rds Correspondence Index” , or by using the “ Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Stand
7、ard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had
8、amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments 10409January 1999Indicated by a sideline in the margin BS EN 1525:1998 BSI 06-1999i Contents Page National forewordInside front cover Foreword2 T
9、ext of EN 15255 ii blank ? EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1525 September 1997 ICS 53.060 Descriptors: Handling equipment, industrial trucks, safety of machines, definitions, hazards, accident prevention, safety devices, safety measures, dangerous areas, utilization, information
10、, marking English version Safety of industrial trucks Driverless trucks and their systems Scurit des chariots de manutention Chariots sans conducteur et leurs systmes Sicherheit von Flurfrderzeugen Fahrerlose Flurfrderzeuge und ihre Systeme This European Standard was approved by CEN on 22 June 1997.
11、 CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on
12、application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat
13、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European
14、Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1525:1997 E ? EN 1525:1997 BS
15、I 06-1999 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 150, Industrial trucks Safety, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, a
16、t the latest by March 1998, and conflicting national standards shall be withdrawn at the latest by March 1998. This European Standard is one of a series of standards for the safety of industrial trucks. This European Standard has been prepared under a mandate given to CEN by the European Commission
17、and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex Z, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
18、following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Safety of industrial trucks Self prop
19、elled trucks up to and including 10 000 kg capacity and tractors with a drawbar pull up to and including 20 000 N prEN 1726-1Part 1: General requirements prEN 1726-2Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated lo
20、ads prEN 1551Safety of industrial trucks Self propelled trucks over 10 000 kg capacity prEN 1459Safety of industrial trucks Self propelled variable reach trucks Safety of industrial trucks Pedestrian propelled trucks prEN 1757-1Part 1: Stacker trucks prEN 1757-2Part 2: Pallet trucks with lift height
21、 up to 300 mm prEN 1757-3Part 3: Platform trucks prEN 1757-4Part 4: Scissor lift pallet trucks EN 1525Safety of industrial trucks Driverless trucks and their systems prEN 1526Safety of industrial trucks Additional requirements for automated functions on trucks Safety of industrial trucks Electrical
22、requirements for trucks prEN 1175-1Part 1: Battery powered trucks prEN 1175-2Part 2: General requirements for internal combustion engine powered trucks prEN 1175-3Part 3: Specific requirements for the electrical power transmission systems of internal combustion engine powered trucks prEN 1755Safety
23、of industrial trucks Operation in potentially explosive atmospheres prEN 12053Safety of industrial trucks Test methods for measuring noise emissions prEN 13564Safety of industrial trucks Test methods for measuring visibility from self propelled trucks ? EN 1525:1997 BSI 06-19993 Contents Page Forewo
24、rd2 0Introduction5 1Scope5 2Normative references5 3Definitions6 4List of hazards6 5Safety requirements for the truck8 5.1Protection against unauthorized use8 5.2Braking system8 5.3Controls for emergency and maintenance operation8 5.4Speed control8 5.5Battery charging8 5.6Load handling8 5.7Steering8
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 1525-1998 工业货车的安全-无驾驶员货车及其系统 1525 1998 工业 货车 安全 驾驶员 及其 系统
链接地址:https://www.31doc.com/p-3644261.html