IEC-61019-1-2004.pdf
《IEC-61019-1-2004.pdf》由会员分享,可在线阅读,更多相关《IEC-61019-1-2004.pdf(44页珍藏版)》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 61019-1 First edition 2004-11 Surface acoustic wave (SAW) resonators Part 1: Generic specification Reference number IEC 61019-1:2004(E) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing,
2、Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolida
3、ted editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information
4、on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addit
5、ion to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch)
6、Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and re
7、placed publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions
8、regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing,
9、 Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 61019-1 First edition 2004-11 Surface acoustic wave (SAW) resonators Part 1: Generic specification IEC 2004 Copyright - all rights reserved No part of this
10、 publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone:
11、 +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch W For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with I
12、ECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 61019-1 IEC:2004(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Order of precedence.8 4 Terms and definitions .8 4.1 Ge
13、neral terms .8 4.2 Operational properties.11 5 Preferred values for ratings and characteristics 19 5.1 Standard nominal frequency values in megahertz (MHz) .19 5.2 Standard operating temperature ranges in degrees Celsius (C) .19 5.3 Standard values of load capacitance in picofarads (pF).19 5.4 Stand
14、ard levels of drive in milliwatts (mW) 19 5.5 Standard values of minimum insertion attenuation in decibels (dB)19 5.6 Standard climatic category 20 5.7 Bump severity .20 5.8 Vibration severity 20 5.9 Shock severity.20 5.10 Fine leak rate 21 6 Marking 21 6.1 Resonator marking 21 6.2 Package marking.2
15、1 7 Quality assessment procedures21 7.1 Primary stage of manufacture21 7.2 Structurally similar components.21 7.3 Subcontracting 22 7.4 Incorporated components 22 7.5 Manufacturers approval22 7.6 Approval procedures .22 7.7 Procedures for capability approval 23 7.8 Procedures for qualification appro
16、val.23 7.9 Test procedures 24 7.10 Screening requirements 24 7.11 Rework and repair work.24 7.12 Certified records of released lots.24 7.13 Validity of release24 7.14 Release for delivery 24 7.15 Unchecked parameters24 8 Test and measurement procedures.24 8.1 General.24 8.2 Test and measurement cond
17、itions .25 8.3 Visual inspection .26 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 61019-1 IE
18、C:2004(E) 3 8.4 Dimensions and gauging procedures.26 8.5 Measurement method of one-port resonator 26 8.6 Measurement method of two-port resonator.28 8.7 Mechanical and environmental test procedures .32 8.8 Endurance test procedure .37 Figure 1 Basic configurations of SAW resonators.9 Figure 2 One-po
19、rt resonator equivalent circuit .12 Figure 3 Vector admittance diagram of a one-port SAW resonator .14 Figure 4 Typical frequency characteristics of a one-port SAW resonator inserted into a transmission line in series (see 4.2.10.2.1 and 4.2.10.3.1).14 Figure 5 Resonance and anti-resonance frequenci
20、es.15 Figure 6 Two-port resonator equivalent circuits17 Figure 7 Typical frequency characteristics of a two-port resonator .18 Figure 8 Reflection measurement 27 Figure 9 Transmission measurement .29 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=I
21、HS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 61019-1 IEC:2004(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURFACE ACOUSTIC WAVE (SAW) RESONATORS Part 1: Generic specification FOREWORD 1)
22、The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical
23、and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical
24、committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizati
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC 61019 2004
链接地址:https://www.31doc.com/p-3769629.html