IEC-61019-1-2004.pdf
INTERNATIONAL STANDARD IEC 61019-1 First edition 2004-11 Surface acoustic wave (SAW) resonators Part 1: Generic specification Reference number IEC 61019-1:2004(E) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 61019-1 First edition 2004-11 Surface acoustic wave (SAW) resonators Part 1: Generic specification IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch W For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 61019-1 IEC:2004(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 Order of precedence.8 4 Terms and definitions .8 4.1 General terms .8 4.2 Operational properties.11 5 Preferred values for ratings and characteristics 19 5.1 Standard nominal frequency values in megahertz (MHz) .19 5.2 Standard operating temperature ranges in degrees Celsius (°C) .19 5.3 Standard values of load capacitance in picofarads (pF).19 5.4 Standard levels of drive in milliwatts (mW) 19 5.5 Standard values of minimum insertion attenuation in decibels (dB)19 5.6 Standard climatic category 20 5.7 Bump severity .20 5.8 Vibration severity 20 5.9 Shock severity.20 5.10 Fine leak rate 21 6 Marking 21 6.1 Resonator marking 21 6.2 Package marking.21 7 Quality assessment procedures21 7.1 Primary stage of manufacture21 7.2 Structurally similar components.21 7.3 Subcontracting 22 7.4 Incorporated components 22 7.5 Manufacturers approval22 7.6 Approval procedures .22 7.7 Procedures for capability approval 23 7.8 Procedures for qualification approval.23 7.9 Test procedures 24 7.10 Screening requirements 24 7.11 Rework and repair work.24 7.12 Certified records of released lots.24 7.13 Validity of release24 7.14 Release for delivery 24 7.15 Unchecked parameters24 8 Test and measurement procedures.24 8.1 General.24 8.2 Test and measurement conditions .25 8.3 Visual inspection .26 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 61019-1 IEC:2004(E) 3 8.4 Dimensions and gauging procedures.26 8.5 Measurement method of one-port resonator 26 8.6 Measurement method of two-port resonator.28 8.7 Mechanical and environmental test procedures .32 8.8 Endurance test procedure .37 Figure 1 Basic configurations of SAW resonators.9 Figure 2 One-port resonator equivalent circuit .12 Figure 3 Vector admittance diagram of a one-port SAW resonator .14 Figure 4 Typical frequency characteristics of a one-port SAW resonator inserted into a transmission line in series (see 4.2.10.2.1 and 4.2.10.3.1).14 Figure 5 Resonance and anti-resonance frequencies.15 Figure 6 Two-port resonator equivalent circuits17 Figure 7 Typical frequency characteristics of a two-port resonator .18 Figure 8 Reflection measurement 27 Figure 9 Transmission measurement .29 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 61019-1 IEC:2004(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURFACE ACOUSTIC WAVE (SAW) RESONATORS Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61019-1 has been prepared by IEC technical committee 49: Piezoelectric and dielectric devices for frequency control and selection. This first edition of IEC 61019-1 cancels and replaces the first edition of IEC 61019-1-1 published in 1990 and the first edition of IEC 61019-1-2 published in 1993. It constitutes a technical revision. The text of this standard is based on the following documents: FDIS Report on voting 49/689FDIS 49/698/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO IEC Directives, Part 2. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 61019-1 IEC:2004(E) 5 IEC 61019 consists of the following parts under the general title Surface acoustic wave (SAW) resonators: Part 1: Generic specification Part 2: Guide to the use (at present under revision) Part 3: Standard outlines and lead connections The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 61019-1 IEC:2004(E) SURFACE ACOUSTIC WAVE (SAW) RESONATORS Part 1: Generic specification 1 Scope This part of IEC 61019 specifies the methods of test and general requirements for SAW resonators using either capability approval or qualification approval procedures of the IECQ system. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027 (all parts), Letter symbols to be used in electrical technology IEC 60050-561:1991, International Electrotechnical Vocabulary (IEC) Chapter 561: Piezo- electric devices for frequency control and selection IEC 60068-1:1988, Environmental testing Part 1: General and guidance IEC 60068-2-1:1990, Environmental testing Part 2: Tests Tests A: Cold IEC 60068-2-2:1974, Environmental testing Part 2: Tests Tests B: Dry heat IEC 60068-2-6:1995, Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) IEC 60068-2-7:1983, Environmental testing Part 2: Tests Test Ga and guidance: Acceleration, steady state IEC 60068-2-13:1983, Environmental testing Part 2: Tests Test M: Low air pressure IEC 60068-2-14:1984, Environmental testing Part 2: Tests Test N: Change of temperature IEC 60068-2-17:1994, Environmental testing Part 2: Tests Test Q: Sealing IEC 60068-2-20:1979, Environmental testing Part 2: Tests Test T: Soldering IEC 60068-2-21:1999, Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices IEC 60068-2-27:1987, Environmental testing Part 2: Tests Test Ea and guidance: Shock IEC 60068-2-29:1987, Environmental testing Part 2: Tests Test Eb and guidance: Bump IEC 60068-2-30:1980, Environmental testing Part 2: Tests Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:00:28 MSTNo reproduction or networking permitted without license from IHS -,-,- 61019-1 IEC:2004(E) 7 IEC 60068-2-32:1975, Environmental testing Part 2: Tests Test Ed: Free fall IEC 60068-2-45:1980, Environmental testing Part 2: Tests Test XA and guidance: Immersion in cleaning solvents IEC 60068-2-52:1996, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) IEC 60068-2-58:1999, Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) IEC 60068-2-64:1993, Environmental testing Part 2: Tests Test Fh: Vibration, broad-band random (digital control) and guidance IEC 60068-2-78:2001, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state IEC 60617 DB:20011 Graphical symbols for diagrams IEC 60122-1:2002, Quartz crystal units of assessed quality Part 1: Generic specification IEC 60444 (all parts), Measurement of quartz crystal unit parameters IEC 61000-4-2:1995, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 2: Ele
