1、OV27101080p/720p HD color CMOS image sen sor with Omn iPixel3-HS? tech nologyOmfl56iondatasheetPRODUCT SPECIFICATION1/2.7 1080p/720p HD color CMOS image sensorwith Omn iPixel3-HS?tech no logy00 Copyright ? 2011 OmniVision Technologies, Inc. All rights reserved.This document is provided“as is ” with
2、no warranties whatsoever, including any warranty of merchantability,non-infringement, fitness for any particular purpose, or any warranty otherwise arising out of any proposal, specification, or sample.OmniVision Technologies, Inc. and all its affiliates disclaim all liability, including liability f
3、or infringement of any proprietary rights, relating to the use of information in this document. No license, expressed or implied, by estoppel or otherwise, to any intellectual property rights is granted herein.The information contained in this document is considered proprietary to OmniVision Technol
4、ogies, Inc. and all its affiliates. This information may be distributed to individuals or organizations authorized by OmniVision Technologies, Inc. to receive said information. Individuals and/or organizations are not allowed to re-distribute said information.Trademark InformationOmniVision and the
5、OmniVision logo are registered trademarks of OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision Technologies, Inc.All other trademarks used herein are the property of their respective owners.1080p/720p HD color CMOS image sensor with OmniPixel3-HS? technologydatasheet (CSP3)PRO
6、DUCT SPECIFICATIONversion 2.03april 2011To learn more about OmniVision Technologies, visit .OmniVision Technologies is publicly traded on NASDAQ under the symbol OVTI.04.06.2011PRODUCT SPECIFICATIONproprietary to OmniVision TechnologiesOmH3lhion,00 applicati onsnotebook computershigh-end video confe
7、rencingsecurityorderi ng in formati onOV02710-A68A (color, lead-free)68-pi n CSP3integrated auto focus filtersupport for digital video port (DVP)support for one lane MIPI interface (up to 800 Mbps)support for output formats: 8-/10-bit RAW RGBsupport for image sizes: 1080p 30 fps,cropped 720p 60 fps,
8、 and VGA 60 fpssupport for black sun cancellationembedded one-time programmable (OTP) memory on-chip phase lock loop (PLL)built-in 1.5V regulator for core00 featuresprogrammable controls: gain, exposure, frame rate, image size, horizontal mirror, vertical flip, cropping, windowing, and panningautoma
9、tic image control functions: automatic exposure (AEC), automatic gain control (AGC), automatic white balance (AWB) and automatic black level calibration (ABLC)serial camera control bus (SCCB)lens correction (LENC)defect pixel correction (DPC)digital video port (DVP) parallel output interfaceoperatin
10、g: -30 C to 85 C junction temperature(see table 8-2)stable image: 0 C to 65 C junction temperature(see table 8-2)output interfaces:10-bit parallel / one-lane MIPIoutput formats:RAW RGB (10-bit)00 key specificatio ns (typical)active array size:1920x1080power supply:analog: 3.0 3.6V (3.3 V typical)cor
11、e: 1.4251.575V (1.5V typical)I/O: 1.73.6V (1.8V typical)power requirements:active: 350 mWpower down: 70 gAtemperature range:lens size: 1/2.7lens chief ray angle:23.6 (seegure 10-2 )input clock frequency:6 27 MHzscan mode: progressivemaximum image transfer rate:1080p: 30 fpscropped 720p: 60 fpsVGA: 1
12、20 fpsQVGA: 240 fpssensitivity:3300 mV/Lux-secshutter: rollingmax S/N ratio: 39 dBdynamic range: 69 dB 8x gainmaximum exposure interval:1096 tlinepixel size: 3 g m x 3 gmdark current: 20 mV/s 60 C junction temperatureimage area: 5856 g m x 3276 gmpackage dimensions:7465 g m x 5865 gmiii00 table of c
13、ontents1 signal descriptions1-12 system level description2-12.1 overview2-12.2 architecture2-12.3 format and frame rate2-62.4 I/O control2-62.5 SCCB interface2-82.6 MIPI interface2-92.7 external components2-92.8 power up sequence2-102.8.1 power up with internal DVDD2-102.8.2 power up with external D
14、VDD source2-112.9 power management2-122.10 power ON reset generation2-122.11 system clock control2-123 block level description3-13.1 pixel array structure3-13.2 binning3-24 image sensor core digital functions4-14.1 mirror and flip4-14.2 image windowing4-24.3 test pattern4-3 4.4AEC/AGC algorithm4-32.
15、8 overview4-32.9 AEC algorithm4-42.8.1 AEC/AGC steps4-61. auto exposure control (AEC)4-62. manual exposure control4-73. auto gain control (AGC)4-74. manual gain control4-74. black level calibration (BLC)4-85 image sensor processor digital functions5-15.1 system control5-104.06.2011PRODUCT SPECIFICAT
16、IONproprietary to Omn iVisio n Tech no logiesOmH3lhion,OV27101080p/720p HD color CMOS image sensor with Omn iPixel3-HS? tech no logy6image sensor output interface digital functions6-16.1 digital video port (DVP)6-16.1.1 overview6-16.1.2 DVP timing6-26.2 mobile industry processor interface (MIPI)6-27
17、register tables7-18operating specifications8-18.1 absolute maximum ratings8-18.2 functional temperature8-18.3 DC characteristics8-28.4 AC characteristics8-39mechanical specifications9-19.1 physical specifications9-19.2 IR reflow specifications9-210optical specifications10-110.1 sensor array center10
18、110.2 lens chief ray angle (CRA)10-2Omrfl那 ion.proprietary to OmniVision TechnologiesPRODUCT SPECIFICATIONversion 2.03vii00 list of figuresfigure 1-1pin diagram1-3figure 2-1OV2710 block diagram2-2figure 2-2reference design schematic2-3figure 2-3CSP3 flex module schematic2-4figure 2-4CSP3 flex with
19、MIPI schematic2-5figure 2-5power up timing with internal DVDD2-10figure 2-6power up timing with external DVDD source2-11figure 3-1sensor array region color filter layout3-1figure 3-2example of 2x2 binning3-2figure 4-1mirror and flip samples4-1figure 4-2image windowing4-2figure 4-3test pattern4-3figu
20、re 4-4desired convergence4-5figure 6-1DVP timing diagram6-2figure 9-1package specifications9-1figure 9-2IR reflow ramp rate requirements9-2figure 10-1sensor array center10-1figure 10-2chief ray angle (CRA)10-204.06.2011PRODUCT SPECIFICATIONproprietary to Omn iVisio n Tech no logiesOmH3lhion,00 list
21、of tablestable 1-1signal descriptions1-1table 2-1formats and frame rates2-6table 2-2driving capability and direction control for I/O pads2-6table 2-3group sharing registers2-8table 2-4group write register2-8table 3-1binning-related registers3-2table 4-1mirror and flip registers4-1table 4-2image crop
22、ping control functions4-2table 4-3test pattern selection control4-3table 4-4AEC/AGC control functions”4-4table 4-5AEC control functions4-5table 4-6BLC control functions4-8table 5-1system control registers5-1table 6-1DVP control registers6-1table 6-2DVP timing specifications6-2table 7-1SC control reg
23、isters7-1table 7-2SCCB control registers7-4table 7-3group sharing registers7-4table 7-4analog registers7-5table 7-5timing control registers7-5table 7-6AEC/AGC registers7-6table 7-7OTP registers7-9table 7-8BLC registers7-11table 7-9FC control registers7-12table 7-10DVP registers7-12table 7-11MIPI reg
24、isters7-13table 7-12ISP control registers7-17table 7-13AWB control registers7-19table 7-14AVG registers7-21table 7-15DPC registers7-22table 7-16LENC registers7-24table 7-17AFC registers7-27OV27101080p/720p HD color CMOS image sensor with Omn iPixel3-HS? tech no logytable 8-1absolute maximum ratings8
25、1table 8-2functional temperature8-1table 8-3DC characteristics (-30 C TJ 85 C)8-2table 8-4AC characteristics (TA = 25 C, VDD-A = 2.8V)8-3table 8-5timing characteristics8-3table 9-1package dimensions9-1table 9-2reflow conditions9-2table 10-1CRA versus image height plot10-2Omrfl那 ion.proprietary to O
26、mniVision TechnologiesPRODUCT SPECIFICATIONversion 2.031-38 sig nal descripti onstable 1-1 lists the signal descriptions and their corresponding pin numbers for the OV2710 image sensor. The packageinformation is shown in section 9 .table 1-1sig nal descripti ons (sheet 1 of 3)pin numbersignal namepi
27、n typedescriptionA1NCno connectA2NCno connectA3NCno connectA4NCno connectA5SVDDpowerpower for sensor circuitA6SGNDgroundground for sensor circuitA7SVDDpowerpower for sensor circuitA8RESETBinputreset (active low with internal pull up resistor)A9DOGNDgroundground for I/O circuitA10VHTreferenceinternal
28、 analog referenceA11VNreferenceinternal analog referenceB1AVDDpowerpower for analog circuitB2NC-no connectB3NCno connectB4NCno connectB5NCno connectB6SGNDgroundground for sensor circuitB7TMainputtest mode (active high with internal pull down resistor)B8PWDNinputpower down (active high with internal
29、pull down resistor)B9DOVDDpowerpower for I/O circuitB10VHreferenceinternal analog referenceB11AVDDpowerpower for analog circuitC1AGNDgroundground for analog circuitC2NCno connectC10NCno connectC11AGNDgroundground for analog circuit04.06.2011PRODUCT SPECIFICATIONproprietary to OmniVision Technologies
30、OmH3lhion,table 1-1sig nal descripti ons (sheet 2 of 3)pin numbersignal namepin typedescriptionD1AVDDpowerpower for analog circuitD2NCno connectD10NCno connectD11AGNDgroundground for analog circuitE1NCno connectE2NCno connectE10NCno connectE11AVDDpowerpower for analog circuitF1NCno connectF2NCL-no c
31、onnectF10NCno connectF11NCno connectG1DGNDgroundground for digital circuitG2XVCLKinputsystem input clockG3NCno connectG4EVDDpowerpower for MIPIG5D3I/ODVP data output 3G6DOVDDpowerpower for I/O circuitG7NCno connectG8NCno connectG9SIOCinputSCCB input clockG10DGNDgroundground for digital circuitG11NCn
32、o connectH1PVDDpowerpower for PLL circuitH2VSYNCI/ODVP VSYNC output / MIPI TX clock lane positive outputH3HREFI/ODVP HREF output / MIPI TX clock lane negative outputH4D9I/ODVP data output 9 (MSB) / MIPI TX data lane positive outputH5D7I/ODVP data output 7 / MIPI TX data lane negative outputH6DOVDDpo
33、werpower for I/O circuitH7DOGNDgroundground for I/O circuittable 1-1sig nal descripti ons (sheet 3 of 3)pin numbersignal namepin typedescriptionH8D2I/ODVP data output 2 (LSB for 8-bit mode)H9D6I/ODVP data output 6H10SIODI/OSCCB dataH11DVDDpowerpower for digital circuitI1PVDDpowerpower for PLL circui
34、tI3EGNDgroundground for MIPI15D5I/ODVP data output 5I6D1I/ODVP data output 1I7PCLKI/ODVP PCLK output18D0I/ODVP data output 0 (LSB for 10-bit mode)19D4I/ODVP data output 4I10D8I/ODVP data output 8a. should be connected to DOGNDfigure 1-1pin diagramYd:A1 1A2 -A3A4 .A5 .A6A7A8 .A9.A10-A11B-P二工. yNCNCNC
35、NCSVDDSGNDSVDDRESETBDOGNDVHTVN$严:B1 1:B2 1.B3.B4B5 :B6 IB7B8 B9 I:B10-B11AVDDNCNCNCNCSGNDTMPWDNDOVDDVHAVDD討哲 :C1 1:C2 -:C10C11r |厂扌AGNDNCNCAGND：D1 1D2 -:D10D11J/AVDDNCNCAGND；E1 IE2 1OV2710.E10-E11NCNCNCAVDD：F1 ：lF2 iF10：,F11NCNCNCNC.G1 I；G2-G3G4G5 -；G6G7G8G9lG10G11 _J-J卢DGNDXVCLKNCEVDDD3DOVDDNCNCSIO
36、CDGNDNC.H1 i:H2 j尸叫 -H3.H4：lZri，,uH5 *!H6-H7B，hH8J.H9I.H10H11as*PVDDVSYNCHREFD9D7DOVDDDOGNDD2D6SIODDVDDji 怜JE:I1 I-I3 -I5 ,t *J:I6 1：7I8 i.I9 I J 丿：I10：PVDDEGNDD5D1PCLKD0D4D82710 CSP DS 1 12-39 system level descripti on9.1 overviewThe OV2710 (color) image sensor is a low voltage, high performance 1/
37、2.7-inch full size HD CMOS image sensor that provides the full functionality of a single 1080p (1920x1080) camera using OmniPixel3-HS? technology in a small footprint package. It provides full-frame, sub-sampled and windowed 10-bit images in various formats via the control of the Serial Camera Contr
38、ol Bus (SCCB) interface or MIPI interface.The OV2710 has an image array capable of operating at up to 30 frames per second (fps) in 1080P resolution with complete user control over image quality, formatting and output data transfer. All required image processing functions, including exposure control
39、 white balance, defective pixel canceling, lens shading correction etc., are programmable through the SCCB interface. In addition, OmniVision image sensors use proprietary sensor technology to improve image quality by reducing or eliminating common lighting/electrical sources of image contamination
40、 such as fixed pattern noise, smearing, etc., to produce a clean, fully stable, color image.For customized information purposes, the OV2710 includes a one-time programmable (OTP) memory.The OV2710 has a one lane MIPI interface and a traditional parallel digital video port (DVP).9.2 architectureThe
41、OV2710 sensor core generates stream pixel data at a constant frame rate, indicated by HREF, VSYNC, and PCLK. figure 2-1 shows the functional block diagram of the OV2710 image sensor.The timing generator outputs signals to access the rows of the image array, precharging and sampling the rows of array
42、 in series. In the time between pre-charging and sampling a row, the charge in the pixels decreases with the time exposed to the incident light. This is known as exposure time.The exposure time is controlled by adjusting the time interval between precharging and sampling. After the data of the pixels in the row has been sampled, it is processed through analog circuitry to correct the offset and multiply the data with corresponding gain. Following analog processing is the ADC which outputs 10-bit data for each pixel in the array.
