BS EN 10217-1-2002 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管.pdf

BRITISH STANDARD BS EN 10217-1:2002 Incorporating Amendment No. 1 Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties The European Standard EN 10217-1:2002, with the incorporation of amendment A1:2005, has the status of a British Standard ICS 23.040.10 BS EN 10217-1:2002 This British Standard, was published under the authority of the Standards Policy and Strategy Committee on 4 July 2002 © BSI 6 March 2006 ISBN 0 580 39841 2 National foreword This British Standard is the official English language version of EN 10217-1:2002, including amendment A1:2005. Together with BS EN 10216-1:2002 it supersedes BS 3601:1987 and BS 3059-1:1987 which are withdrawn. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags . Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated in the text by . The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 41 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 154736 March 2006See national foreword 1 EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10217-1 May 2002 + A1 January 2005 ICS 23.040.10 English version Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (includes amendment A1:2005) Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non allié avec caractéristiques spécifiées à température ambiante (inclut lamendement A1:2005) Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur (enthält Änderung A1:2005) This European Standard was approved by CEN on 25 April 2002. Amendment A1 was approved by CEN on 9 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels © 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10217-1:2002 + A1:2005 E EN 10217-1:2002 (E) 2 Contents 1SCOPE 5 2NORMATIVE REFERENCES .5 3TERMS AND DEFINITIONS . 6 4SYMBOLS .7 5CLASSIFICATION AND DESIGNATION7 5.1Classification .7 5.2Designation 7 6INFORMATION TO BE SUPPLIED BY THE PURCHASER7 6.1Mandatory information7 6.2Options .8 6.3Example of an order 8 7MANUFACTURING PROCESS 8 7.1Steelmaking process.8 7.2Deoxidation process .8 7.3Tube manufacture and delivery conditions 9 8Requirements.10 8.1General .10 8.2Chemical composition 10 8.3Mechanical properties.12 8.4Appearance and internal soundness. 13 8.5Straightness .14 8.6Preparation of ends.14 8.7Dimensions, masses and tolerances 15 9Inspection .20 9.1Types of inspection.20 9.2Inspection documents 20 9.3Summary of inspection and testing.21 10SAMPLING23 10.1Frequency of tests.23 10.2Preparation of samples and test pieces24 11TEST METHODS.26 11.1Chemical analysis 26 11.2Tensile test on base material .26 11.3Transverse tensile test on the weld.26 11.4Flattening test 26 11.5Drift expanding test.26 11.6Weld bend test .27 11.7Impact test27 11.8Leak tightness test 28 11.9Dimensional inspection 29 11.10Visual examination 29 11.11Non-Destructive Testing .29 11.12Retest, sorting and reprocessing 29 12MARKING29 12.1Marking to be applied29 12.2Additional marking 30 13PROTECTION .30 Annex A (normative).31 Annex ZA (informative) 40 Bibliography41 EN 10217-1:2002 (E) 3 Foreword This document (EN 10217-1:2002) has been prepared by Technical Committee ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. Other parts of EN 10217 are: Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 3: Alloy fine grain steel tubes. Part 4 : Electric welded non-alloy and alloy steel tubes with specified low temperature properties Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties. Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties. Part 7: Stainless steel tubes. Another European Standard series covering tubes for pressure purposes is: EN 10216: Seamless steel tubes for pressure purposes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 10217-1:2002/A1:2004) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This Amendment to European Standard EN 10217-1:2002 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC. EN 10217-1:2002 (E) 4 For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 10217-1:2002 (E) 5 1 SCOPE This Part of EN 10217 specifies the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties. 2 NORMATIVE REFERENCES EN 10217 incorporates by date or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For date references, subsequent amendments to or revisions of, any of these publications apply to EN 10217 only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). The requirements of EN 10217 rule when they differ from those in the standards and documents referred to below: EN 760, Welding consumables - Fluxes for submerged arc welding Classification EN 895, Destructive tests on welds in metallic materials - Transverse tensile test EN 910,Destructive tests on weld in metallic materials -Bend test EN 1321, Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds EN 10002-1, Metallic materials - Tensile testing - Part 1 : Method of test (at ambient temperature) EN 10020, Definitions and classification of grades of steel EN 10021, General technical delivery requirements for steel and iron products EN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols. EN 10027-2, Designation systems for steels Part 2 : Numerical systems. EN 10045-1, Metallic materials - Charpy impact test - Part 1 : Test method EN 10052, Vocabulary of heat treatment terms for ferrous products EN 10204, Metallic products - Types of inspection documents ENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit length EN 10233, Metallic materials - Tubes - Flattening test EN 10234, Metallic materials - Tubes - Drift expanding test EN 10246-1, Non-Destructive Testing of steel tubes Part 1 : Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak- tightness EN 10246-3, Non-Destructive Testing of steel tubes - Part 3 :Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections EN 10246-5, Non-Destructive Testing of steel tubes Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections EN 10217-1:2002 (E) 6 EN 10246-7, Non-Destructive Testing of steel tubes - Part 7 : Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections EN 10246-8, Non-Destructive Testing of steel tubes Part 8: Automatic ultrasonic testing of the weld seam of electric welded tubes for the detection of longitudinal imperfections EN 10246-9, Non-Destructive Testing of steel tubes Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imperfections EN 10246-10, Non-Destructive Testing of steel tubes Part.10: Radiographic testing of the weld seam of automatic fusion arc-welded steel tubes for the detection of imperfections. EN 10256,Non-Destructive Testing of steel tubes - Qualification and competence of level 1 and level 2 NDT personnel prEN 102661), Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) prEN 10168 1), Iron and steel products - Inspection documents - List of information and description EN ISO 2566-1, Steel - Conversion of elongation values Part 1: Carbon and low-alloy steels (ISO 2566- 1:1984) ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of chemical composition CR 10260, Designation systems for steel - Additional symbols CR 10261, ECISS Information Circular IC 11 - Iron and steel - Review of available methods of chemical analysis. 3 TERMS AND DEFINITIONS For the purposes of this Part of EN 10217, the definitions given in EN 10020, EN 10021, EN 10052, prEN 10266 and the following apply. 3.1 employer organisation for which a person works on a regular basis. NOTE The employer may be either the tube manufacturer or a third party organisation providing Non-Destructive Testing (NDT) services. 3.2 qualification of welding procedure testing and inspection of the welding procedure for submerged arc welded (SAW) tubes by the manufacturer in accordance with annex A . 3.3 approval of welding procedure testing and inspection of the welding procedure for SAW tubes witnessed and approved in accordance with Annex A by an authorised body. 1)In preparation; until this document is published as a European standard, a corresponding national standard should be agreed at the time of enquiry and order. EN 10217-1:2002 (E) 7 4 SYMBOLS For the purposes of this Part of EN 10217, the symbols given in prEN 10266 and the following apply: C1, C2 category conformity indicators (see clauses 7.3.1 and 7.3.3.) TC test category. 5 CLASSIFICATION AND DESIGNATION 5.1 Classification In accordance with the classification system in EN 10020, the steel grades are classified as non-alloy quality steels. 5.2 Designation 5.2.1For the tubes covered by this Part of EN 10217 the steel designation consists of: a) the number of this Part of EN 10217; plus either: a) the steel name in accordance with EN 10027-1 and CR 10260; or: a) the steel number allocated in accordance with EN 10027-2 . 5.2.2The steel name is designated by: a) the capital letter P for pressure purposes; b) the indication of the specified minimum yield strength for thickness less than or equal to 16 mm, expressed inMPa (see Tab