09-30197862-DC.pdf

a Date: 19 January 2009 Origin: International Latest date for receipt of comments: 30 April 2009 Project no.: 2009/00693 Responsible committee: EPL/80 Maritime navigation and radiocommunication equipment and systems Interested committees: Title: Draft BS EN 62616 Maritime navigation and radiocommunication equipment and systems - Bridg e navigational watch alarm system (BNWAS)- Performance requirements, methods of testing and required test results Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede. NONE If you are aware of a current national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 April 2009. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email cservicesbsigroup.com. British, International and foreign standards are also available from BSI Customer Services. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI web site http:/www.bsigroup.com. Direct tel: 0208 996 7281 Responsible Committee Secretary: Mr S Bounds (BSI) E-mail: simon.boundsbsigroup.com Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 8.0 DPC: 09/30197862 DC Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent standard. There is a high probability that this text could be adopted by CENELEC as a reference document for harmonization or as a European Standard. Recipients of this draft are requested to comment on the text bearing in mind this possibility. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft® Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site at: http:/www.bsigroup.com/en/Standards-and-Publications/Current-work/DPCs/ Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI FORM CDV (IEC) 2008-08-01 80/555/CDV COMMITTEE DRAFT FOR VOTE (CDV) PROJET DE COMITÉ POUR VOTE (CDV) Project number IEC 62616 Ed.1 Numéro de projet IEC/TC or SC: TC 80 CEI/CE ou SC: Secretariat / Secrétariat UK Submitted for parallel voting in CENELEC Soumis au vote parallèle au CENELEC Date of circulation Date de diffusion 2009-01-16 Closing date for voting (Voting mandatory for P-members) Date de clôture du vote (Vote obligatoire pour les membres (P) 2009-05-21 Also of interest to the following committees Intéresse également les comités suivants Supersedes document Remplace le document See note Proposed horizontal standard Norme horizontale suggérée Other TC/SCs are requested to indicate their interest, if any, in this CDV to the TC/SC secretary Les autres CE/SC sont requis dindiquer leur intérêt, si nécessaire, dans ce CDV à lintention du secrétaire du CE/SC Functions concerned Fonctions concernées Safety Sécurité EMC CEM Environment Environnement Quality assurance Assurance qualité CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE MODIFICATION. IL NE PEUT SERVIR DE RÉFÉRENCE. LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE. THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT SHOULD NOT BE USED FOR REFERENCE PURPOSES. RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. Title : IEC 62616 Ed.1: Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) Performance requirements, methods of testing and required test results Introductory note According to AC 8, 2003, the NP and CDV are circulated in parallel, under references 80/554/NP and 80/555/CDV. This new International Standard specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for a bridge navigational watch alarm system (BNWAS) as required by Chapter V of the International Convention for the Safety of Life at Sea (SOLAS). It is expected that BNWAS will become a mandatory carriage requirement for ships in 2011 and that type approval of BNWAS will then be required. ATTENTION VOTE PARALLÈLE CEI CENELEC Lattention des Comités nationaux de la CEI, membres du CENELEC, est attirée sur le fait que ce projet de comité pour vote (CDV) de Norme internationale est soumis au vote parallèle. Les membres du CENELEC sont invités à voter via le système de vote en ligne du CENELEC. ATTENTION IEC CENELEC PARALLEL VOTING The attention of IEC National Committees, members of CENELEC, is drawn to the fact that this Committee Draft for Vote (CDV) for an International Standard is submitted for parallel voting. The CENELEC members are invited to vote through the CENELEC online voting system. Copyright © 2009 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy or “mirror“ the file or printed version of the document, or any part of it, for any other purpose without permission in writing from IEC. Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI BNWAS © IEC:2008 2 80/555/CDV CONTENTS 1 Scope.5 2 Normative references .5 3 Performance requirements .6 3.1 Functionality6 3.1.1 Operational modes 6 3.1.2 Operational sequence of indications and alarms6 3.1.3 Reset function .7 3.1.4 Emergency call facility.8 3.2 Accuracy .8 3.3 Security.8 3.4 Malfunctions, alarms and indications .8 4 Ergonomic criteria 8 4.1 Operational controls 8 4.2 Presentation of information8 4.2.1 Operational mode8 4.2.2 Visual indications 9 4.2.3 First stage bridge audible alarm.9 4.2.4 Second and third stage remote audible alarm 9 5 Design and installation .9 5.1 General.9 5.2 Specific requirements9 5.2.1 System physical integrity.9 5.2.2 Reset devices9 5.3 Power supply.10 6 Interfacing 10 6.1 Inputs10 6.2 Outputs .10 7 Methods of testing and required test results .10 7.1 General.10 7.2 General requirements10 7.3 Display of information10 7.4 Operational tests.10 Annex A (informative) Installation considerations.14 A.1 Location of reset function 14 A.2 Reset facilities.14 A.3 Visual indications 14 A.4 First stage bridge audible alarm 14 Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI BNWAS © IEC:2008 3 80/555/CDV INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - Bridge navigational watch alarm system (BNWAS) Performance requirements, methods of testing and required test results FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC XXX has been prepared by IEC technical committee 80: The text of this standard is based on the following documents: FDIS Report on voting XX/XX/FDIS XX/XX/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI BNWAS © IEC:2008 4 80/555/CDV The committee has decided that the contents of this publication will remain unchanged until the maintenance result date1) indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 1) The National Committees are requested to note that for this publication the maintenance result date is 2013-10. Licensed Copy: London South Bank University, South Bank University, 02/02/2009 05:59, Uncontrolled Copy, (c) BSI BNWAS © IEC:2008 5 80/555/CDV MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - Bridge navigational watch alarm system (BNWAS) Performance requirements, methods of testing and required test results 1 Scope This International Standard specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for a bridge navigational watch alarm system (BNWAS) as required by Chapter V of the International Convention for the Safety of Life at Sea (SOLAS), as amended. It takes account of the general requirements given in IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. This standard incorporates the applicable parts of the performance standards included in IMO resolution MSC.128(75). NOTE All text of this standard, whose wording is identical to that of IMO resolution MSC.128(75), is printed in italics, and the resolution and associated