BS-7568-30-1993 ISO-9448-9-1993.pdf

BRITISH STANDARD BS 7568-30: 1993 ISO 9448-9: 1992 Press tools Part 30: Specification for guide bushes: form B, ball cage bushes, plain, type 2 UDC 621.979.07 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 This British Standard, having been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 November 1993 © BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MTE/12 Draft for comment 91/73259 DC ISBN 0 580 22358 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machine, Engineers and Hand Tools Standards Policy Committee (MTE/-) to Technical Committee MTE/12, upon which the following bodies were represented: Advanced Manufacturing Technology Research Institute Amalgamated Engineering Union Gauge and Tool Makers Association Coopted member Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 © BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Dimensions1 3Material and corresponding hardness1 4Designation1 Annex A (informative) BibliographyInside back cover Figure 11 Table 12 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 ii © BSI 10-1999 National foreword This Part of BS 7568 has been prepared under the direction of the Machine, Engineers and Hand Tools Standards Policy Committee. It is identical with ISO 9448-9:1992 Tools for pressing Guide bushes Part 9: Form B, ball cage bushes, plain, type 2, published by the International Organization for Standardization (ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 © BSI 10-19991 1 Scope This part of ISO 9448 specifies the main dimensions and tolerances, in millimetres, of guide bushes of form B, plain ball cage bushes, type 2, intended for use in press tools and to be mounted in the clamp plate by means of interference fit. It gives guidance on the materials, and specifies the hardness and the designation of bushes in accordance with this part of ISO 9448. 2 Dimensions See Figure 1 and Table 1. Details not stated, such as chamfers, radii, lubrication grooves, etc., are left to the manufacturers discretion. 3 Material and corresponding hardness The material is left to the manufacturers discretion and the hardness shall be 60HRC. 4 Designation A guide bush in accordance with this part of ISO 9448 shall be designated by a) “Guide bush”; b) a reference to this part of ISO 9448; c) its form; d) its guiding diameter, D1, in millimetres; e) its length, l1, in millimetres. EXAMPLE A guide bush of form B, plain ball cage bush, type 2, of guiding diameter D1= 25 mm and of length l1= 50 mm is designated as follows: Guide bush ISO 9448-9 B 25 × 50 +2 0 Figure 1 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 2 © BSI 10-1999 Table 1 D1 l1 253240506380100 D2 n6 nom.tol.4050638090112140 50XX 63XXX 80XXXX 100XXXX 125XXXX 160XXXX 200XXX 250XX NOTEX, standardized dimension. 3 4 3 5 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30:1993 © BSI 10-1999 Annex A (informative) Bibliography 1 ISO 6508:1986, Metallic materials Hardness test Rockwell test (scales A B C D E F G H K). 2 ISO 9448-1:1991, Tools for pressing Guide bushes Part 1: Forms. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7568-30: 1993 ISO 9448-9: 1992 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:39:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI