BS-7851-1996 IEC-61119-7-1995.pdf

BRITISH STANDARD BS 7851:1996 IEC 1119-7: 1995 Digital audio tape cassette system (DAT) DAT logo application rule ICS 33.160.30 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 This British Standard, having been prepared under the direction of the Electrotechnical Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1996 © BSI 09-1999 The following BSI references relate to the work on this standard: Committee reference EPL/100/2 Draft for comment 93/212601 DC ISBN 0 580 25568 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/2, Recording, upon which the following bodies were represented: Association of Professional Recording Services Limited Audio Engineering Society British Broadcasting Corporation British Kinematograph, Sound and Television Society British Tape Industry Association Federation of the Electronics Industry ITV Association (ITVA) Royal Television Society Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 © BSI 09-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Bibliographical references1 3DAT logo types1 4DAT logo application rules1 5Copyright of DAT logo1 6Supply of DAT logo information1 7Detailed specification of the DAT logo1 Figure 1 Basic DAT logo2 Figure 2 Solid DAT logo2 Figure 3 Wide letters for Digital Audio Tape3 Figure 4 Solid DAT logo. Extended letters for Digital Audio Tape3 Figure 5 Examples of DAT logos4 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 ii © BSI 09-1999 National foreword This British Standard has been prepared by Technical Subcommittee EPL/100/2 and is identical with IEC 1119-7:1995, published by the International Electrotechnical Commission (IEC). This standard is Part of the IEC 1119 series, the other Parts of which have mostly been published as ENs by the European Committee for Electrotechnical Standardization (CENELEC) and implemented as a BS EN 61119 series. IEC 1119 includes the following Parts: Part 1: Dimensions and characteristics (EN 61119-1:1994); Part 2: DAT calibration tape (EN 61119-2:1994); Part 3: DAT tape properties (EN 61119-3:1994); Part 4: Character pack format1); Part 5: DAT for professional use (EN 61119-5:1995); Part 6: Serial copy management system (EN 61119-6:1994); A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. 1) In preparation. Cross-references Publication referred toCorresponding British Standard BS EN 61119 Digital audio tape cassette system (DAT) IEC 1119-1:1992Part 1:1994 Dimensions and characteristics IEC 1119-2:1991Part 2:1994 DAT calibration tape IEC 1119-3:1992Part 3:1994 DAT tape properties IEC 1119-6:1992Part 6:1994 Serial copy management system Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 © BSI 09-19991 1 Scope This technical report defines the use of the DAT logo on DAT equipment and accessories. It provides information on the specification, copyright, and application rule of the logo. 2 Bibliographic references IEC 1119-1:1992, Digital audio tape cassette system (DAT) Part 1: Dimensions and characteristics. IEC 1119-2:1991, Digital audio tape cassette system (DAT) Part 2: DAT calibration tape. IEC 1119-3:1992, Digital audio tape cassette system (DAT) Part 3: DAT tape properties. IEC 1119-4, Digital audio tape cassette system (DAT) Part 4: Character pack format (under consideration). IEC 1119-6:1992, Digital audio tape cassette system (DAT) Part 6: Serial copy management system. 3 DAT logo types Figure 1 to Figure 5 show several DAT logo types. The DAT logo is composed of two phrases, “DAT” and “Digital Audio Tape”. Details of the logo types are specified in 7.4. The use of each logo is restricted and defined in the application rules for DAT logos. 4 DAT logo application rules 4.1 The DAT logo assures compatibility between DAT cassette systems for consumer use, manufactured in conformance with the DAT cassette system specifications as laid down in IEC 1119-1 to IEC 1119-6. The DAT logo shall be used on all consumer DAT recorders/players and related products, including DAT tapes. 4.2 The manufacturers involved with the production of DAT cassette recorders/players and related products shall positively promote the use of the DAT logo. 5 Copyright of the DAT logo 5.1 The use of the DAT logo is recommended, but left to the discretion of the manufacturers concerned. 5.2 Should a third party claim the rights on the use of any of the DAT logo types, he who receives the claim shall notify the EIAJ without delay. The EIAJ can be contacted at the following address: ELECTRONIC INDUSTRIES ASSOCIATION OF JAPAN 3-2-2 Marunouchi, Chiyodaku, Tokyo 100 Japan 6 Supply of DAT logo information The manufacturer who wishes to use the DAT logo shall ask EIAJ for clean proofs of the DAT logo types. 7 Detailed specification of the DAT logo 7.1 Figure 1 shows the basic DAT logo. 7.2 The DAT logo type may be enlarged or reduced. 7.3 Figure 2, Figure 3, and Figure 4 show modified DAT logos. These modified logo types may be used only under the following conditions. 7.3.1 Figure 2: Solid DAT logo When printing obscures the details of the striped DAT logo. 7.3.2 Figure 3: Wide letters for Digital Audio Tape When printing obscures the details of the characters of Digital Audio Tape. 7.3.3 Figure 4: Solid DAT logo with extended letters for Digital Audio Tape When the letters become obscured, as in cases 7.3.1 and 7.3.2. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 2 © BSI 09-1999 7.3.4 Solid DAT and Digital Audio Tape Only when the height of DAT is 15 mm or less, and when the DAT logo type becomes obscured when printed. 7.3.5 The modified DAT logo types shall never be used in any material for publicity and advertisement. 7.4 A boxed DAT logo shall not be used. 7.5 The use of colour for the DAT logo type is neither specified nor restricted. 7.6 Figure 5 shows examples of DAT logos. Figure 1 Basic DAT logo Figure 2 Solid DAT logo Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 © BSI 09-19993 Figure 3 Wide letters for Digital Audio Tape Figure 4 Solid DAT logo. Extended letters for Digital Audio Tape Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 4 © BSI 09-1999 Figure 5 Examples of DAT logos Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 © BSI 09-1999 List of references See national foreword. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7851:1996 IEC 1119-7: 1995 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 12:39:04 GMT+00:00 2006, Uncontrolled Copy, (c) BSI