BS-EN-ISO-11127-4-1998 BS-7079-F14-1994.pdf

BRITISH STANDARD CONFIRMED DECEMBER 1998 BS EN ISO 11127-4:1998 BS 7079-F14: 1994 Incorporating Amendment No. 1 to BS 7079-F14:1994 (which it renumbers as BS EN ISO 11127-4:1998) Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4: Assessment of hardness by a glass slide test The European Standard EN ISO 11127-4:1997 has the status of a British Standard ICS 87.020 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11127-4:1998 This British Standard, having been prepared under the direction of the Surface Treatments and Coatings Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 March 1994 © BSI 04-1999 The following BSI references relate to the work on this standard: Committee reference STC/21 Draft for comment 92/50250 DC ISBN 0 580 23053 8 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Surface Treatments and Coatings Standards Policy Committee (STC/ ) to Technical Committee STC/21, upon which the following bodies were represented: Association of Consulting Engineers British Chemical Engineering Contractors Association British Coatings Federation Ltd. British Constructional Steelwork Association Ltd. British Grit Association British Railways Board British Steel Industry Department of Transport Electricity Association Institute of Corrosion National Federation of Painting and Decorating Contractors Oil and Colour Chemists Association Paint Research Association Royal Society of Chemistry Amendments issued since publication Amd. No.DateComments 9849February 1998 Renumbers BS 7079-F14:1994 as BS EN ISO 11127-4:1998, with addition of EN ISO title page, foreword and annex ZA, and changes to national foreword (indicated by sideline in the margin) Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11127-4:1998 © BSI 04-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN ISO 11127-43 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11127-4:1998 ii © BSI 04-1999 National foreword This British Standard has been prepared by Technical Committee STI/21 and is the English language version of EN ISO 11127-4:1997 Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4: Assessment of hardness by a glass slide test, published by the European Committee for Standardization (CEN). It is identical with ISO 11127-4:1993, published by the International Organization for Standardization (ISO). International Standard ISO 11127-4 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 11127-4 July 1997 ICS 87.020 Descriptors: Paints, varnishes, substrates, steel products, blast-cleaning, abrasives, non-metallic abrasives, tests, hardness tests, scratch hardness tests. English version Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993) Préparation des subjectiles dacier avant application de peintures et de produits assimilés Méthodes dessai pour abrasifs non métalliques destinés à la préparation par projection Partie 4: Evaluation de la dureté au moyen dun essai à la lame de verre (ISO 11127-4:1993) Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen Prüfverfahren für nichtmetallische Strahlmittel Teil 4: Abschätzung der Härte durch Vergleich mit Glasscheiben (ISO 11127-4:1993) This European Standard was approved by CEN on 1997-06-16. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels © 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref. No. EN ISO 11127-4:1997 E Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 11127-4:1997 © BSI 04-1999 2 Foreword The text of the International Standard from Technical Committee ISO/TC 35, Paints and varnishes, of the International Organization for Standardization (ISO) has been taken over as a European Standard by Technical Committee CEN/TC 139, Paints and varnishes, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 1998, and conflicting national standards shall be withdrawn at the latest by January 1998. According to CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. NOTENormative references to International Standards are listed in Annex ZA (normative). Contents Page Foreword2 1Scope3 2Normative reference3 3Apparatus3 4Sampling3 5Procedure3 6Test report3 Annex A (informative) International Standards for non-metallic blast-cleaning abrasives4 Annex ZA (normative) Normative references to international publications with their relevant European publicationsInside back cover Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 11127-4:1997 © BSI 04-19993 1 Scope This is one of a number of parts of ISO 11127 dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the various parts of ISO 11126. The ISO 11126 and ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives. Information on all parts of both series is given in Annex A. This part of ISO 11127 specifies a method of assessing whether a non-metallic blast-cleaning abrasive has a minimum hardness of 6 on Mohs scale. NOTE 1The test described in this part of ISO 11127 is a pass/fail test and is not a method for the accurate determination of hardness. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO 11127. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of ISO 11127 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 11127-1:1993, Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling. 3 Apparatus 3.1 Microscope, having a magnification of × 10. 3.2 Glass microsope slides. 4 Sampling Take a representative sample of the product to be tested, as described in ISO 11127-1. 5 Procedure 5.1 Examine a small quantity of the material under the microscope (3.1) and, if grains of different colours or diameter are present, select a few grains of each. 5.2 Place the selected grains between two glass microscope slides (3.2) and, whilst applying pressure, slowly move one slide over the other with a reciprocating motion for 10 s. Examine the glass surfaces and, if scratched, the material shall be considered as having a minimum hardness of 6 on Mohs scale. 6 Test report The test report shall contain at least the following information: a) all details necessary to identify the product tested, in accordance with the appropriate part of ISO 11126 (see Annex A), if applicable; b) a reference to this part of ISO 11127 (ISO 11127-4); c) the result of the test; d) any deviation from the test method specified; e) the date of the test: f) the name of the person who carried out the test. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 11127-4:1997 4 © BSI 04-1999 Annex A (informative) International Standards for non-metallic blast-cleaning abrasives Requirements and test methods for non-metallic blast-cleaning abrasives are contained in ISO 11126 and ISO 11127 respectively. ISO 11126 will consist of the following parts under the general title: Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 1: General introduction and classification; Part 2: Silica sand; Part 3: Copper refinery slag; Part 4: Coal furnace slag; Part 5: Nickel refinery slag; Part 6: Iron furnace slag; Part 7: Fused aluminium oxide; Part 8: Olivine sand; Part 9: Staurolite; Part 10: Garnet. ISO 11127 will consist of the following parts, under the general title: Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling; Part 2: Determination of particle size distribution; Part 3: Determination of apparent density; Part 4: Assessment of hardness by a glass slide test; Part 5: Determination of moisture; Part 6: Determination of water-soluble contaminants by conductivity measurement; Part 7: Determination of water-soluble chlorides; Part 8: Determination of abrasive mechanical properties. Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 11127-4:1997 © BSI 04-1999 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. PublicationYearTitleENYear ISO 11127-11993Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 1: Sampling EN ISO 11127-11997 Licensed Copy: sheffieldun sheffieldun, na, Sun Nov 19 09:03:55 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 11127-4:1998 BS 7079-F14: 1994 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications.