BS-EN-60122-3-2001.pdf

BRITISH STANDARD BS EN 60122-3:2001 Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections The European Standard EN 60122-3:2001 has the status of a British Standard ICS 31.140 ? Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60122-3:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 13 December 2002 © BSI 13 December 2002 ISBN 0 580 40957 0 National foreword This British Standard is the official English language version of EN 60122-3:2001. It is identical with IEC 60122-3:2001. It supersedes BS 5069-1:1980 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezo-electric devices for frequency control and selection, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 31 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARDEN 60122-3 NORME EUROPÉENNE EUROPÄISCHE NORMOctober 2001 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels © 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60122-3:2001 E ICS 31.140 English version Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections (IEC 60122-3:2001) Résonateurs à quartz sous assurance de la qualité Partie 3: Encombrements normalisés et connexions des sorties (CEI 60122-3:2001) Schwingquarze mit bewerteter Qualität Teil 3: Norm-Gehäusemaße und Anschlussdrähte (IEC 60122-3:2001) This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Foreword The text of document 49/493/FDIS, future edition 3 of IEC 60122-3, prepared by IEC TC 49, Piezoelectric and dielectric devices for frequency control and selection, was submitted to the IEC- CENELEC parallel vote and was approved by CENELEC as EN 60122-3 on 2001-10-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2002-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2004-10-01 _ Endorsement notice The text of the International Standard IEC 60122-3:2001 was approved by CENELEC as a European Standard without any modification. _ 2 egaP 1002:322106 NE Page 2 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 3 CONTENTS Page INTRODUCTION.4 Clause 1Scope.5 2Guidance for the standardization of outline drawings for frequency control and selection devices5 3Dimensions of quartz crystal unit enclosures 7 4Designation of quartz crystal unit enclosures7 Specification sheets 1 to 22 .9 to 30 Bibliography31 3 egaP 1002:322106 NE Page 3 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 4 INTRODUCTION The second edition of IEC 60122-3 (1977) and its amendments 1 to 4 contained 51 enclosure types showing the dimensional and geometrical characteristics of these enclosures. Since its release, due to progress in technology, many of the enclosures given in the standard have become obsolete. Bearing this in mind, technical committee 49 has issued a questionnaire on all outlines contained in IEC 60122-3. Based on the replies received, technical committee 49 made a decision at the meeting held in Rotterdam in June 1996 to retain only enclosures which remained in “wide usage”. These enclosures are specified in the present standard. The following 24 enclosure types have been deleted from the second edition of IEC 60122-3 (1977) and its amendments 1 to 4. BG, BG/1, BH, BH/1, BH/2, BJ, BJ/1, BJ/2, CL, DB, DD, DE, DF, DG, DH, EF, EG, CU 03 A.,CU 03 B., CU 03 C., CU 03 .1,CU 03 .2,CU 04 .2, CU 05 D. 4 egaP 1002:322106 NE Page 4 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 5 QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY Part 3: Standard outlines and lead connections 1 Scope This part of IEC 60122 specifies the outline dimensions and lead connections of quartz crystal units with lead enclosures. 2 Guidance for the standardization of outline drawings for frequency control and selection devices In order to achieve a uniform presentation of all outline drawings for frequency control and selection devices, the following shall be considered. 2.1 An outline drawing shall show all dimensional and geometrical characteristics of an enclosure necessary to ensure mechanical interchangeability with all other enclosures of the same outline. Enlarged detail view may be used, if necessary. 2.2 The outline drawing shall consist of three parts: 2.2.1 A drawing with dimensional symbols (capital letter) as shown in figure 1 with applicable notes, if necessary. 2.2.2 A tabular listing relating the drawing symbols to the actual dimensions. Where possible, this shall be shown on the same page as the drawing. 2.2.3 An “actual-size” sketch (scale 1:1). 2.3 The outline drawing shall be executed in the third-angle projection. 2.4 The function and identification of the lead connections (termination) shall be determined by agreement between the supplier and user. They shall not be defined on the outline drawing. 2.5 Descriptive notes may be used at the bottom of, or adjacent to, the drawing with proper reference to the body of the drawing. 2.6 All dimensions shall be in millimetres. 2.7 Outline dimensions A, B, C, D and E shall be listed with maximum values only. 2.8 Lead (termination) cross-sectional dimensions shall be listed with minimum and maximum values. If applicable, nominal dimensions may be added. 2.9 The spacing of the leads (termination) symbol H shall be listed with minimum, nominal and maximum dimensions. 5 egaP 1002:322106 NE Page 5 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 6 Figure 1 Guidance for outline drawings Scale 2:1 Sheet Date: Dimensions (mm) Ref. Min.Nom.Max. Notes Types Ax Bx Cx Dx Ex Hxxx Kxx 1 Lxx Ux 2 Wx 2 NOTE 1 . NOTE 2 . Actual size D E C L B A K H W U IEC 842/01 6 egaP 1002:322106 NE Page 6 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 7 2.10 Leads (terminations) for soldering application shall be specified with the minimum length dimensions (symbol L) only. Leads (terminations) for plug-in application shall be specified with minimum and maximum length dimensions. 2.11 If leads (terminations) are provided with an undercut, dimensions U and W shall be listed with minimum dimensions only. 3 Dimensions of quartz crystal unit enclosures The dimensions in this standard apply to the completed quartz crystal units. Only those dimensions which meet the requirements of the guidance for standardization of outline drawings are given (see clause 2). 4 Designation of quartz crystal unit enclosures Table 1 Designation of quartz crystal unit enclosures No.TypeSheet No.Description 1 AA AB Sheet 1Metal, solder-sealed, two-lead crystal unit outline 2 BC BC/1 Sheet 2Metal, solder-sealed, two-lead crystal unit outline 3 BF BF/1 Sheet 3Metal, solder-sealed, two-lead crystal unit outline 4 CK, CM CN, CP Sheet 4Metal, welded, three-lead crystal unit outline 5CXSheet 5Metal, solder-sealed, two-lead crystal unit outline 6 CY, CY/1 CZ Sheet 6Glass, two-lead crystal unit outline 7 DA DC Sheet 7Glass, two-lead crystal unit outline 8DKSheet 8Metal, welded, three-lead crystal unit outline 9DLSheet 9Metal, welded, five-lead crystal unit outline 10DNSheet 10Metal, welded, two-lead crystal unit outline 11 DP EH Sheet 11Metal, welded, two-lead crystal unit outline 12DQSheet 12Metal, welded, two-lead crystal unit outline 13DRSheet 13Metal, welded, four-lead crystal unit outline 14DZSheet 14Metal, welded, two-lead crystal unit outline 15DVSheet 15 Metal, solder-diffusion-sealed, two-lead cylindrical crystal unit outline 7 egaP 1002:322106 NE Page 7 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 8 Table 1 Designation of quartz crystal unit enclosures (continued) No.TypeSheet No.Description 16DWSheet 16 Metal, solder-diffusion-sealed, two-lead cylindrical crystal unit outline 17EDSheet 17 Metal, solder-diffusion-sealed, two-lead cylindrical crystal unit outline 18 EB, EJ EK Sheet 18Metal, welded, two-lead crystal unit outline 19 CU 01 A. CU 01 B. CU 01 C. CU 01 D. CU 01 E. CU 01 F. Sheet 19Metal, welded, two-lead crystal unit outline for automatic handling 20 CU 02 A. CU 02 B. CU 02 C. CU 02 D. CU 02 E. CU 02 F. Sheet 20Metal, welded, two-lead crystal unit outline for automatic handling 21 CU 04 A. CU 04 B. CU 04 C. CU 04 D. Sheet 21Metal, welded, two-lead crystal unit outline for automatic handling 22 CU 05 A. CU 05 B. CU 05 C. Sheet 22Metal, welded, two-lead crystal unit outline for automatic handling 8 egaP 1002:322106 NE Page 8 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 9 Metal, solder-sealed, two-lead crystal unit outline ? Type AA and AB Scale 1:1 Sheet 1Date: 2001-07 Dimensions (mm) Ref. Min.Nom.Max. Notes Types A 19,23 3 B 8,94 3 C1 19,68 Type AA C2 38,76 Type AB D 18,41 E 8,05 H 12,14 12,35 12,55 K 1,22 1,27 1,32 1 L 5,66 6,30 NOTE 1 Lead ends rounded. NOTE 2 If required, leads may be provided with an undercut. NOTE 3 A and B dimensions include an allowance for solder. (Type AA) D E C L B A K H IEC 843/01 9 egaP 1002:322106 NE Page 9 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 01 Metal, solder-sealed, two-lead crystal unit outline ? Type BC and BC/1 Scale 2:1 Sheet 2Date:2001-07 Dimensions (mm) Ref. Min.Nom.Max. Notes Types A 11,05 1 B 4,65 1 C 13,46 D 10,21 E 3,81 H4,674,90 5,08 K 0,40 0,48 L1 38,10 Type BC L2 12,70 Type BC/1 NOTE 1 A and B dimensions include an allowance for solder. Actual size Type BC D E C L B A K H IEC 844/01 01 egaP 1002:322106 NE Page 10 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 11 Metal, solder-sealed, two-lead crystal unit outline ? Type BF and BF/1 Scale 1:1 Sheet 3Date: 2001-07 Dimensions (mm) Ref. Min.Nom.Max. Notes Types A 19,23 1 B 8,94 1 C1 19,63 Type BF, BF/1 D 18,41 E 8,05 H 12,14 12,35 12,55 K 0,70 0,80 L1 38,10 Type BF L2 12,70 Type BF/1 NOTE 1 A and B dimensions include an allowance for solder. (Type BF) D E C L BK H IEC 845/01 A 11 egaP 1002:322106 NE Page 11 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 21 Metal, welded, three-lead crystal unit outline ? Type CK, CM, CN and CP Scale 2:1 Sheet 4Date: 2001-07 Dimensions (mm) Ref. Min.Nom.Max. Notes Types A 9,39 C 6,60 Type CK C 25,40 Type CM C 39,37 Type CN C 59,69 Type CP D 8,51 H 4,835,08 5,33 K 0,40 0,48 L 15,24 NOTE 1 Lead No. 2 is grounded to case. NOTE 2 The crystal unit outline shown in this sheet can be manufactured in either “cold-welded” or “resistance- welded” form and is distinguished by the letter “C” for the cold-welded or the letter “R” for the resistance-welded form by adding the letter at the end of the type code (e.g. CKC or CKR). Actual size Type CK Note 1 D C L H K A IEC 846/01 21 egaP 1002:322106 NE Page 12 EN 601223:2001 Licensed Copy: sheffieldun sheffieldun, na, Fri Nov 10 16:49:03 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 061-223 ? EI:C0021 31 Metal, solder-sealed, two-lead crystal unit outline ? Type CXScale 2:1 Sheet 5Date: 2001-07 Dimensions (mm) Ref. Min.Nom.Max. Notes Types A 11,05 3 B 4,65 3 C 13,46 D 10,21 E 3,81 H 4,67 4,90 5,08 K 0,9