IEC-62319-1-2005.pdf
INTERNATIONAL STANDARD IEC 62319-1 First edition 2005-02 Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification Reference number IEC 62319-1:2005(E) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 62319-1 First edition 2005-02 Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch V For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 62319-1 IEC:2005(E) CONTENTS FOREWORD.4 1 General6 1.1 Scope6 1.2 Normative references 6 2 Technical data7 2.1 Units and symbols .7 2.2 Terms and definitions7 2.3 Preferred values10 2.4 Marking.11 3 Quality assessment procedures 11 3.1 General.11 3.2 Primary stage of manufacture 11 3.3 Subcontracting 12 3.4 Structurally similar components .12 3.5 Qualification approval procedures 12 3.6 Rework and repair .18 3.7 Release for delivery.18 3.8 Certified test records of released lots.19 3.9 Delayed delivery19 3.10 Alternative test methods 19 3.11 Manufacture outside the geographical limits of IECQ NSIs19 3.12 Unchecked parameters 19 4 Test and measurement procedures .19 4.1 Standard conditions for testing.19 4.2 Drying and recovery.20 4.3 Visual inspection and check of dimensions.20 4.4 Zero power resistance .21 4.5 Insulation resistance (for insulated types only) .21 4.6 Voltage proof (for insulated types only) 22 4.7 Robustness of terminations (for leaded types only).22 4.8 Soldering.23 4.9 Mounting .23 4.10 Rapid change of temperature.24 4.11 Climatic sequence .24 4.12 Cycle life testing25 4.13 Trip endurance 27 4.14 Trip current .28 4.15 Hold current 28 4.16 Residual current and power dissipation 29 4.17 Time-to-trip .29 4.18 Cold environmental electrical cycling30 4.19 Thermal runaway.30 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 62319-1 IEC:2005(E) 3 Annex A (normative) Fixed sample size test schedules for qualification approval.31 Annex B (normative) Vibration-, bump-, shock-, shear-, substrate bending test32 B.1 Vibration 32 B.2 Bump .32 B.3 Shock.33 B.4 Shear (adhesion) test .33 B.5 Substrate bending test33 Figure 1 Test schedule flow chart.15 Figure 2 Circuit for Trip endurance .28 Table 1 Fixed sample size test schedule for qualification approval of Polymeric PTC thermistors for current limitation, assessment level EZ.16 Table 2 Quality conformance inspection for lot-by-lot inspection17 Table 3 Quality conformance inspection for periodic testing 18 Table 4 Loading weight for wire terminations 22 Table 5 Number of cycles.25 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 62319-1 IEC:2005(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POLYMERIC THERMISTORS DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62319-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. The text of this standard is based on the following documents: FDIS Report on voting 40/1505/FDIS 40/1534/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 62319-1 IEC:2005(E) 5 The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 62319-1 IEC:2005(E) POLYMERIC THERMISTORS DIRECTLY HEATED POSITIVE STEP FUNCTION TEMPERATURE COEFFICIENT Part 1: Generic specification 1 General 1.1 Scope This part of IEC 62319 prescribes terms and methods of test for polymeric positive temperature coefficient thermistors, insulated and non-insulated types, typically intended for use in current limiting and overcurrent protection applications. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027-1: Letter symbols to be used in electrical technology Part 1: General IEC 60050: International Electrotechnical Vocabulary IEC 60068-1: Environmental testing Part 1: General and guidance IEC 60068-2-6: Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) IEC 60068-2-14: Environmental testing Part 2: Tests Test N: Change of temperature IEC 60068-2-20: Environmental testing Part 2: Tests Test T: Soldering IEC 60068-2-21: Environmental testing Part 2-21: Tests Test U: Robustness of terminations and integral mounting devices IEC 60068-2-27: Environmental testing Part 2: Tests Test Ea and guidance: Shock IEC 60068-2-29: Environmental testing Part 2: Tests Test Eb and guidance: Bump IEC 60068-2-45: Environmental testing Part 2: Tests Test XA and guidance: Immersion in cleaning solvents IEC 60294: Measurement of the dimensions of a cylindrical component having two axial terminations IEC 60410: Sampling plans and procedures for inspection by attributes. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/10/2007 02:50:16 MSTNo reproduction or networking permitted without license from IHS -,-,- 62319-1 IEC:2005(E) 7 IEC 60617-DB: 20011 Graphical symbols for diagrams IECQ 001003: IEC Quality Assessment System for Electronic Components Guidance documents IECQ 001002-3: IEC Quality Assessment System for Electronic Components Rules of Procedure Part 3: Approval procedures ISO 1000: SI units and recommendations for the use of their multiples and of certain other units 2 Technical data 2.1 Units and symbols Units, graphical symbols, letter symbols and terminology shall, whenever possible, be taken from the following documents: IEC 60027 IEC 60050 IEC 60617 ISO 1000 The following subclauses contain additional terminology applicable to thermistors. Where further items are required they shall be derived in accordance with the principles of the documents listed above. 2.2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.2.1 thermistor thermally sensitive semiconducting resistor whose primary function is to exhibit an important change in electrical resistance with a change in body temperature 2.2.2 positive temperature coefficient thermistor thermistor in which the resistance increases with increasing temperature throughout the useful part of its characteristic. The PTC thermistors covered in this specification typically exhibit a very sharp increase in resistance over a narrow temperature range 2.2.3 directly heated positive temperature coefficient thermistor thermistor in which the change in temperature is obtained either by the flow of current through the thermo-sensitive element, or by a change in ambient temperature, or by a combination of both of thes
