IEC-60384-3-1-2006.pdf

INTERNATIONAL STANDARD IEC 60384-3-1 QC 300801 Second edition 2006-10 Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ Reference number IEC 60384-3-1:2006(E) Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IEC 60384-3-1 QC 300801 Second edition 2006-10 Fixed capacitors for use in electronic equipment Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ © IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch N For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 2 60384-3-1 © IEC:2006(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-3-1 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 1989 and constitutes a minor revision related to tables, figures and references. The text of this standard is based on the following documents: FDIS Report on voting 40/1772/FDIS 40/1790/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The QC numbers that appear on the front cover of this publication are the specification numbers in the IEC Quality Assessment System for Electronic Components (IECQ). Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 60384-3-1 © IEC:2006(E) 3 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts of the IEC 60384 series, under the (new) general title Fixed capacitors for use in electronic equipment, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 4 60384-3-1 © IEC:2006(E) FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte Assessment level EZ INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between square brackets on the first page of the detail specification correspond to the following information, which shall be inserted in the position indicated. Identification of the detail specification 1 The “International Electrotechnical Commission” or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed circuit board applications, this is clearly stated in the detail specification in this position. 7 Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment level. 9 Reference data on the most important properties, to allow comparison between the various capacitor types. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 60384-3-1 © IEC:2006(E) 5 1 IEC 60384-3-1-XXX 2 QC 300801-XXX IEC 60384-3-1 4 QC 300801 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-3 3 SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE 5 6 OUTLINE DRAWING: (see Table 1) (first angle projection) 7 (Other shapes are permitted within the dimensions given.) ASSESSMENT LEVEL(S): EZ 8 NOTE For 1 to 9: see previous page. 9 Information on the availability of components qualified to this detail specification is given in the Qualified Products List. 1 General data 1.1 Recommended method of mounting (to be inserted) The capacitors are mounted by their terminations (see 1.3.2 and 4.3 of IEC 60384-3). 1.2 Dimensions Table 1 Case-size reference and dimensions Dimensions mm or inches and mm Case-size reference l h d When there is no case-size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 6 60384-3-1 © IEC:2006(E) The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Variation of capacitance with temperature (see Table 3) Tangent of loss angle Leakage current (see Table 3) Impedance (if applicable) (see Table 4) Equivalent series resistance (ESR) (if required) (see Table 5) Surge voltage Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltagea Case size Case size Case size Case size Rated capacitance (in F) a If different from the rated voltage. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 60384-3-1 © IEC:2006(E) 7 Table 3 Characteristics at high and low temperature Maximum values Capacitance change % Tangent of loss angle % Leakage current A UR V CR F TA TR TB TA 20 °C TR TB 20 °C TR TBa TA is the lower category temperature. TB is the upper category temperature. TR is the rated temperature. a Measured with the category voltage. Table 4 Impedance at 100 kHz (if required) Case size Impedance Table 5 Equivalent series resistance (ESR) at 100 kHZ (if required) Rated voltage UR V Rated capacitance F Maximum ESR m Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/06/2007 06:14:11 MSTNo reproduction or networking permitted without license from IHS -,-,- 8 60384-3-1 © IEC:2006(E) 1.4 Normativ