IEC-PAS-61076-3-117-2006.pdf

PUBLICLY AVAILABLE SPECIFICATION IEC PAS 61076-3-117 Pre-Standard First edition 2006-09 Connectors for electronic equipment Product requirements Part 3-117: Rectangular connectors Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 Variant 14 related to IEC 61076-3-106 Push-pull coupling Reference number IEC/PAS 61076-3-117:2006(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 PUBLICLY AVAILABLE SPECIFICATION IEC PAS 61076-3-117 Pre-Standard First edition 2006-09 Connectors for electronic equipment Product requirements Part 3-117: Rectangular connectors Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 Variant 14 related to IEC 61076-3-106 Push-pull coupling PRICE CODE IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch T For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission 2 IEC/PAS 61076-3-117 © IEC 2006 CONTENTS FOREWORD.4 1 General data 6 1.1 Scope6 1.2 Normative references 6 1.3 IEC type designation8 2 Terms and definitions .9 3 Dimensional information .9 3.1 Common features 9 3.2 General.9 3.3 Contact arrangement of all connector types9 3.4 IP65 and IP67 sealing9 3.5 Industrial IEC 60603-7 variant 14 Rectangular push-pull coupling 10 3.5.1 Industrial IEC 60603-7 variant 14, fixed connector 10 3.5.2 Industrial IEC 60603-7 variant 14, free connector .12 3.6 Termination and mounting information14 3.6.1 General .14 3.6.2 Mounting information for variant 14, fixed connector .14 4 Gauges 14 4.1 Connectors, IEC 60603-7 interface 14 5 Characteristics .14 5.1 Climatic category.14 5.2 Electrical .15 5.2.1 Clearance and creepage distances.15 5.2.2 Voltage proof .15 5.2.3 Current-carrying capacity .15 5.2.4 Mating cycles with power applied .16 5.2.5 Initial contact resistance.16 5.2.6 Input-to-output resistance.16 5.2.7 Resistance unbalance16 5.2.8 Initial insulation resistance .16 5.3 Transmission characteristics17 5.3.1 General .17 5.3.2 Mechanical 17 5.3.3 Mechanical operation .17 5.3.4 Effectiveness of connector coupling devices transversal .17 5.3.5 Effectiveness of connector coupling devices .17 5.3.6 Separation and engagement forces 17 6 Test schedule.18 6.1 General.18 6.2 Test procedures and measuring methods .18 6.3 Preconditioning18 6.4 Wiring and mounting of specimens.18 6.4.1 Wiring18 6.4.2 Mounting18 IEC/PAS 61076-3-117 © IEC 2006 3 6.5 Arrangement for contact resistance test: 18 6.6 Arrangement for dynamic stress tests (test phase AP2)19 6.7 Basic (minimum) test schedule.19 6.8 Full test schedule 19 6.8.1 Test preliminary group P 19 6.8.2 Test group P20 6.8.3 Test Group AP .21 6.8.4 Test Group BP .22 6.8.5 Test group CP23 6.8.6 Test Group DP.24 6.8.7 Test Group EP .24 -,-,- 4 IEC/PAS 61076-3-117 © IEC 2006 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQUIPMENT Product requirements Part 3-117: Rectangular connectors Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 Variant 14 related to IEC 61076-3-106 Push-pull coupling FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. A PAS is a technical specification not fulfilling the requirements for a standard but made available to the public. IEC-PAS 61076-3-117 has been processed by subcommittee 48B: Connectors, of IEC technical committee 48: Electromechanical components and mechanical structures for electronic equipment. The text of this PAS is based on the following document: This PAS was approved for publication by the P-members of the committee concerned as indicated in the following document Draft PAS Report on voting 48B/1655/NP 48B/1697A/RVN IEC/PAS 61076-3-117 © IEC 2006 5 Following publication of this PAS, which is a pre-standard publication, the technical committee or subcommittee concerned will transform it into an International Standard. This PAS shall remain valid for an initial maximum period of three years starting from 2006-09. The validity may be extended for a single three-year period, following which it shall be revised to become another type of normative document or shall be withdrawn. 6 IEC/PAS 61076-3-117 © IEC 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT Product requirements Part 3-117: Rectangular connectors Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 Variant 14 related to IEC 61076-3-106 Push-pull coupling 1 General data 1.1 Scope This Publicly Available Specification (PAS) covers protective housings for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in IEC 60603-7-2, IEC 60603-7-3, IEC 60603-7-4, IEC 60603-7-5, IEC 60603-7-7 to IP65 and IP67 ratings according to IEC 60529, for use in industrial environments. The housings cover a variety of different locking mechanisms according to this PAS and a variety of different mounting configurations and termination types which are detailed in IEC 60603-7. Common mating configurations for all variants are defined in IEC 60603-7. The mating dimensions for the housings under Clause 3 allow the mating conditions under IEC 60603-7 to be fulfilled. The fully assembled variants (connectors) described in this document incorporate fixed and free connectors which are fully compliant which IEC 60603-7. 1.2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-581:1978, International Electrotechnical Vocabulary Chapter 581: Electro- mechanical components for electronic equipment IEC 60068-1, Environmental testing Part 1: General and guidance IEC 60068-2-14, Environmental testing Part 2: Tests Test N: Change of temperature IEC 60068-2-30, Environmental testing Part 2-30: Tests Test Db: Damp heat, cyclic (12 h + 12 h cycle) IEC 60512 (all parts), Connectors for electronic equipment Tests and measurements IEC 60529:1989, Degree of protection provided by enclosures (IP Code) IEC 60603-7: Connectors for frequencies below 3 MHz for use with printed boards Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality IEC 60603-7-2: Connectors for electronic equipment Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors for data transmission with frequencies up to 100 MHz1 1 To be published. IEC/PAS 61076-3-117 © IEC 2006 7 IEC 60603-7-3: Connectors for electronic equipment Part 7-3: Detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz IEC 60603-7-4: Connectors for electronic equipment Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors for data transmission with frequencies up to 250 MHz IEC 60603-7-5: Connectors for electronic equipment Part 7-5: Detail specification for 8- way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz2 IEC 60603-7-7: Connectors for electronic equipment Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz IEC 60664-1: Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests IEC 61076-1, Connectors for electronic equipment Product requirements Part 1: Generic specification IEC 61156-2: Multicore and symmetrical pair/quad cables for digital communications Part 2: Horizontal floor wiring Sectional specification IEC 61156-3: Multicore and symmetrical pair/quad cables for digital communications Part 3: Work area wiring Sectional specification IEC 61156-4: Multicore and symmetrical pair/quad cables for digital communications Part 4: Riser cables Sectional specification 2 To be published. 8 IEC/PAS 61076-3-117 © IEC 2006 1.3 IEC type designation Protective housings and connectors in protective housings according to this standard shall be designated by the following system. IEC-61076-3-106 L N L N N Reference to this standard Letters denoting the housing type Fixed version Panel mounted A Free version Cable mounted B Number denoting the protective housing variants Variant 01 01 Variant 02 02 Variant 12 12 Variant 13 13 Variant 14 14 Letter denoting type of contact Female F Male M Number denoting the performance level of the housing 1250 operations 2750 operations Number denoting internal interface conformance type 0Housing without insert 2IEC 60603-7-2 3IEC 60603-7-3 4IEC 60603-7-4 5IEC 60603-7-5 6IEC 60603-7-7 NOTE “L” stands for letter “N” stands for number Example: IEC-PAS 61076-3-106 A14F5 2: Fixed protective housing panel mounted, housing variant 14, female version, insert according to IEC 60603-7-5 (250 MHz shielded), housing for 750 operations. IEC/PAS 61076-3-117 © IEC 2006 9 2 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-581 apply. 3 Dimensional information 3.1 Common features The industrial connectors referenced in this specification are composed of IEC 60603-7 style fixed and free connectors house