BS EN 50126-3-2006 铁路应用.可靠型,可用性,可维修性和安全性 RAMS 的演示和规范 第三部份.pdf
《BS EN 50126-3-2006 铁路应用.可靠型,可用性,可维修性和安全性 RAMS 的演示和规范 第三部份.pdf》由会员分享,可在线阅读,更多相关《BS EN 50126-3-2006 铁路应用.可靠型,可用性,可维修性和安全性 RAMS 的演示和规范 第三部份.pdf(66页珍藏版)》请在三一文库上搜索。
1、PUBLISHED DOCUMENT PD CLC/TR 50126-3:2006 Railway applications The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS ICS 29.280; 45.020 ? PD CLC/TR 50126-3:2006 This Published Document
2、 was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006 ISBN 0 580 48625 7 National foreword This Published Document is the official English language version of CLC/TR 50126-3:2006. The UK participation in its preparation was entrusted by Technical
3、Committee GEL/9, Railway electrotechnical applications, to Subcommittee GEL/9/2, Rolling stock, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international
4、or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to in
5、clude all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any e
6、nquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the CLC/TR title page, pages 2 to 62, an insi
7、de back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments TECHNICAL REPORT CLC/TR 50126-3 RAPPORT TECHNIQUE TECHNISCHER BERICHT May 2006 CENELEC European Committee for Ele
8、ctrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref
9、. No. CLC/TR 50126-3:2006 E ICS 29.280; 45.020 English version Railway applications The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) Part 3: Guide to the application of EN 50126-1 for rolling stock RAMS Applications ferroviaires Spcification et dmon
10、stration de la fiabilit, de la disponibilit, de la maintenabilit et de la scurit (FDMS) Partie 3: Guide pour lapplication de lEN 50126-1 la fiabilit, la disponibilit, la maintenabilit et la scurit du matriel roulant This Technical Report was approved by CENELEC on 2004-08-28. CENELEC members are the
11、 national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw
12、itzerland and the United Kingdom. Foreword This Technical Report was prepared by Working Group B11 of SC 9XB, Electromechanical material on board of rolling stock, of Technical Committee CENELEC TC 9X, Electrical and electronic applications for railways. The text of the draft was submitted to the fo
13、rmal vote and was approved by CENELEC as CLC/TR 50126-3 on 2004-08-28. This Technical Report forms an informative part of EN 50126 and contains guidelines for the application of EN 50126-1 to Rolling Stock RAM. _ CLC/TR 50126-3:2006 2 ? Contents Page Introduction.5 1 Scope .6 1.1 Limitation of scope
14、 .6 2 Definitions .6 3 Approach adopted for the Guide.7 4 Application of this Guide .7 4.1 Object of the application.7 4.2 Application of EN 50126-1 .7 4.2.1 Assessment of the application of EN 50126-1.7 4.2.2 Mandatory requirements for the application of EN 50126-18 5 Specifying RAM requirements.8
15、5.1 Preliminary RAM analysis 8 5.1.1 Introduction8 5.1.2 Preliminary RAM Analysis activities 9 5.1.3 System Identification9 5.1.4 Breakdown structure and boundary limits .11 5.2 Failure conditions.12 5.3 RAM requirements .15 5.3.1 Introduction15 5.3.2 Reliability Targets15 5.3.3 Maintainability Targ
16、ets.16 5.3.4 Availability Targets.20 5.4 Process for choosing RAM figures.23 5.5 RAM Programme23 5.5.1 Introduction23 5.5.2 Configuration Management System 23 5.5.3 RAM Programme Outline.24 5.5.4 Example of RAM Analyses Document Template and Data.25 6 RAM Assurance during Life Cycle38 6.1 RAM Progra
17、mme and Phases of the Life Cycle 38 6.1.1 Tender Phase 39 6.1.2 Design Phase 40 6.1.3 Demonstration Phase43 7 Specific Hazards related to rolling stock .46 7.1 Introduction.46 7.2 Hazard Identification Process 46 7.3 List of the common hazards related to rolling stock.46 CLC/TR 50126-3:2006 3 ? 8 RA
18、M Parameters to be incorporated into LCC Model.48 8.1 Introduction.48 8.2 Overview of LCC Modelling48 8.3 RAM parameters for LCC.49 Annex A (informative) Examples of breakdown structure51 Bibliography62 Table 1 Possible sharing of responsibility.5 Table 2 Example of header for a form representing a
19、breakdown structure.12 Table 3 Example of minimum set of data representing a breakdown structure12 Table 4 RAM Failure Categories.13 Table 5 Significant Failure Specification .14 Table 6 Major Failure Specification.14 Table 7 Minor Failure Specification.14 Table 8 Reliability Requirements for Failur
20、e Categories.16 Table 9 Quantitive Requirements for Maintainability.17 Table 10 Preventive/Corrective Maintenance Requirements19 Table 11 Logistic Support Requirements 19 Table 12 Maintenance Cost Requirements.20 Table 13 Availability Requirements.22 Table 14 Example of header for RAM analyses Templ
21、ate26 Table 15 Example of minimum set of data for Reliability Prediction sheets26 Table 16 Example of minimum set of data for Preventive Maintenance sheets .29 Table 17 Example of minimum set of data for Corrective Maintenance sheets33 Table 18 Example of minimum set of data for items FMECA sheets35
22、 Table 19 Description of the main tasks of Design Phase41 Figure 1 Example of Reliability Prediction Analysis Sheet.27 Figure 2 Example of Preventive Maintenance Analysis Sheet.30 Figure 3 Example of Preventive Maintenance Sheet for a single frequency32 Figure 4 Example of Corrective Maintenance Ana
23、lysis Sheet .34 Figure 5 Example of items FMECA Sheet36 Figure 6 Example of functions FMECA Sheet37 Figure 7 RAM Programme and Life Cycle Phases.38 Figure 8 Possible relationships between Customer, Main Supplier, Sub-Supplier during some phases of Life Cycle for rolling stock39 Figure 9 Flow diagram
24、me representing activities/documentations of Design Phase.41 Figure A.1 Example of structure using organisation chart for an Electrical Multiple Unit Coach.52 Figure A.2 Example of structure using the tree breakdown chart for an EMU (Electrical Multiple Unit) Traction Vehicle.53 Figure A.1 Example o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50126-3-2006 铁路应用.可靠型 可用性 可维修性和安全性 RAMS 的演示和规范 第三部份 50126 2006 铁路 应用 可靠 可用性 维修 安全性 演示 规范 第三 部份
链接地址:https://www.31doc.com/p-3647097.html