BS-EN-50377-8-8-2007.pdf
《BS-EN-50377-8-8-2007.pdf》由会员分享,可在线阅读,更多相关《BS-EN-50377-8-8-2007.pdf(40页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 50377-8-8:2007 Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U The European
2、 Standard EN 50377-8-8:2007 has the status of a British Standard ICS 33.180.20 ? Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:18:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 50377-8-8:2007 This British Standard was published under the authority of t
3、he Standards Policy and Strategy Committee on 31 October 2007 BSI 2007 ISBN 978 0 580 57569 3 National foreword This British Standard is the UK implementation of EN 50377-8-8:2007. The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/
4、86/2, Fibre optic interconnecting devices and passive components. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat
5、ion. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:18:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD
6、 EN 50377-8-8 NORME EUROPENNE EUROPISCHE NORM September 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All
7、rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50377-8-8:2007 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex ter
8、minated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit - Partie 8-8: Type LSH-APC simplex cbl sur une fibre un
9、imodale des catgories B1.1 et B1.3 de la CEI 60793-2-50, frule tout zircone, catgorie U Steckverbinderstze und Verbindungsbauelemente fr Lichtwellenleiter- Datenbertragungssysteme - Produktnormen - Teil 8-8: Bauart LSH-APC-Simplex zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 6079
10、3-2-50 mit Zirkonium-Stift fr die Kategorie U This European Standard was approved by CENELEC on 2007-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
11、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
12、translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estoni
13、a, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: London South Bank University, London South Bank Unive
14、rsity, Wed Oct 17 01:18:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 50377-8-8:2007 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised components. The text of the draft was submitted to the Unique Ac
15、ceptance Procedure and was approved by CENELEC as EN 50377-8-8 on 2007-06-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-06-01 - latest date by which the national
16、standards conflicting with the EN have to be withdrawn (dow) 2010-06-01 _ Licensed Copy: London South Bank University, London South Bank University, Wed Oct 17 01:18:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI - 3 - EN 50377-8-8:2007 Connector sets and interconnect components to be used in optical
17、 fibre communication systems - Product specifications Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Description Performance Coupling mechanism: Latched push-pull Configuration: Plug/adaptor/plug Fibre category: E
18、N 60793-2-50 Types B1.1 and B1.3 Cable type: See Table 3 Application: Attenuation grades: (random mate) Return loss grades: For use in category U (uncontrolled environment) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements 1: 60 dB mated 55 dB unmated
19、Related documents: EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional specification (IEC 60794-2) EN 61300 series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and
20、passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-15 Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 61754-15) EN 61755-1 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single
21、mode non- dispersion shifted fibres - General and guidance (IEC 61755-1) EN 61755-3-2 1) Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres (IEC 61755-3-2, mod.) ETSI TS 100
22、 671 Transmission and Multiplexing (TM); Passive optical components; Optical fibre connectors for single-mode optical fibre communication systems; Common requirements and conformance testing Outline and maximum dimensions: 1) At draft stage. Licensed Copy: London South Bank University, London South
23、Bank University, Wed Oct 17 01:18:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 50377-8-8:2007 - 4 - Contents 1 Scope 5 1.1 Product definition. 5 1.2 Intermateability. 5 1.3 Operating environment. 5 1.4 Reliability 5 1.5 Quality assurance 5 2 Normative references 6 3 Description 7 3.1 Plug 7 3.2
24、Adaptor 7 3.3 Materials 7 3.4 Dimensions . 7 3.5 Colour and marking 7 4 Variants. 8 4.1 Terminated plug 8 4.2 Adaptor 9 5 Dimensional requirements10 5.1 Outline dimensions.10 5.2 Mating face and other limit dimensions 14 6 Tests.23 6.1 Sample size .23 6.2 Test and measurement methods.23 6.3 Test seq
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN 50377 2007
链接地址:https://www.31doc.com/p-3743011.html