BS-EN-ISO-11126-9-2004 BS-7079-F9-2004.pdf
《BS-EN-ISO-11126-9-2004 BS-7079-F9-2004.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-11126-9-2004 BS-7079-F9-2004.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 11126-9:2004 BS 7079-F9: 2004 Incorporating Amendment No. 1 to BS 7079-F9:1999 (renumbers the BS as BS EN ISO 11126-9:2004) Preparation of steel substrates before application of paints and related products Specification for non-metallic blast-cleaning abrasives Part 9: Sta
2、urolite The European Standard EN ISO 11126-9:2004 has the status of a British Standard ICS 25.220.10 ? BS EN ISO 11126-9:2004 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Commit
3、tee and comes into effect on 15 August 1999 BSI 25 April 2005 ISBN 0 580 32928 3 National foreword This British Standard is the official English language version of EN ISO 11126-9:2004. It is identical with ISO 11126-9:1999. The UK participation in its preparation was entrusted to Technical Committe
4、e STI/21, Surface preparation of steel, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international a
5、nd European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BS
6、I Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for
7、its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, page ii, pages 1 to 4, an inside
8、back cover and a back cover. The BSI copyright notice displayed throughout this document indicates when the document was last issued. Amendments issued since publication Amd. No.DateComments 1551225 April 2005Implementation of the European Standard. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
9、EN ISO 11126-9 December 2004 ICS 25.220.10 English version Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999) Prparation des subjectiles dacier avant application de peint
10、ures et de produits assimils - Spcifications pour abrasifs non mtalliques destins la prparation par projection - Partie 9: Staurolite (ISO 11126-9:1999) Vorbereitung von Stahloberflchen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 9: Staurolith (
11、ISO 11126-9:1999) This European Standard was approved by CEN on 21 December 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
12、bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili
13、ty of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita
14、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Bruss
15、els 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11126-9:2004: E Foreword The text of ISO 11126-9:1999 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of the International Organization for Stand
16、ardization (ISO) and has been taken over as EN ISO 11126-9:2004 by Technical Committee CEN/TC 139 “Paints and varnishes“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at
17、 the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czec
18、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 11126-9:1999 has been a
19、pproved by CEN as EN ISO 11126-9:2004 without any modifications. EN ISO 111269:2004 EN ISO 111269:2004 EN ISO 11126-9:2004 ii BSI 25 April 2005 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of pr
20、eparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, i
21、n liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft Intern
22、ational Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 11126-9 was prepared by Technical Committee ISO/TC 35, Pai
23、nts and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products. ISO 11126 consists of the following parts, under the general title Preparation of steel substrates before application of paints and related products Specifications for non-metall
24、ic blast-cleaning abrasives: Part 1: General introduction and classification; Part 3: Copper refinery slag; Part 4: Coal furnace slag; Part 5: Nickel refinery slag; Part 6: Iron furnace slag; Part 7: Fused aluminium oxide; Part 8: Olivine sand; Part 9: Staurolite; Part 10: Almandite garnet. At the t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-ISO-11126-9-2004 BS-7079-F9-2004 BS EN ISO 11126 2004 7079 F9
链接地址:https://www.31doc.com/p-3747519.html