BS-EN-ISO-3098-0-1998.pdf
《BS-EN-ISO-3098-0-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-3098-0-1998.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 3098-0:1998 Technical Product Documentation Lettering Part 0: General requirements The European Standard EN ISO 3098-0:1997 has the status of a British Standard ICS 01.100.01 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy,
2、 (c) BSI BS EN ISO 3098-0:1998 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1998 BSI 04-1999 ISBN 0 580 29110 3 National foreword This British Standard is the
3、English language version of EN ISO 3098-0:1997. It is identical with ISO 3098-0:1997. The UK participation in its preparation was entrusted by Technical Committee TDE/4, Engineering drawing, Metrology and Precision measurement and all related documentation, to Subcommittee TDE/4/-/1, General drawing
4、 principles, conventions and related documentation, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related int
5、ernational and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative ref
6、erences to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using
7、the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fr
8、om legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, page ii, pages 1 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had a
9、mendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN ISO 3098-0:1998 BSI 04-1999i Cont
10、ents Page National forewordInside front cover Foreword2 Forewordii Text of EN ISO 3098-01 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled C
11、opy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 3098-0 December 1997 ICS 01.100.10 Descriptors: See ISO document English version Technical product documentation Lettering Part 0: General requirements (ISO 3098-0:1997) Documentation technique de produits Ecriture Patrie 0: Presc
12、riptions gnrales (ISO 3098-0:1997) This European Standard was approved by CEN on 10 November 1997. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-t
13、o-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under
14、 the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxem
15、bourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and b
16、y any means reserved worldwide for CEN national Members. Ref. No. EN ISO 3098-0:1997 E Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 3098-0:1997 BSI 04-1999 2 Foreword The text of the International Standard ISO 3098-0:1997 has been
17、prepared by Technical Committee ISO/TC 10 “Technical drawings, product definition and related documentation” in collaboration with CEN/CS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 1998
18、, and conflicting national standards shall be withdrawn at the latest by June 1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, Fr
19、ance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO 3098-0:1997 was approved by CEN as a European Standard without any modification. Contents Page F
20、oreword2 1Scope1 2Normative references1 3Definitions1 4General requirements1 5Dimensions1 6Designation5 Annex A (informative) BibliographyInside back cover Figure 12 Figure 22 Figure 32 Figure 42 Figure 53 Figure 63 Figure 75 Figure 85 Table 1 Dimensioning of lettering type A4 Table 2 Dimensioning o
21、f lettering type B4 Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Licensed Copy: sheffieldun sheffieldun, na, Wed Nov 15 04:59:37 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN ISO 3098-0:1997 ii BSI 04-1999 Foreword ISO (the International
22、Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been esta
23、blished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardiza
24、tion. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 3098-0 was prepared by Technical Committ
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 3098 1998
链接地址:https://www.31doc.com/p-3747591.html