BS-EN-ISO-1403-1997.pdf
《BS-EN-ISO-1403-1997.pdf》由会员分享,可在线阅读,更多相关《BS-EN-ISO-1403-1997.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN ISO 1403:1997 Incorporating Amendment No. 1 to BS ISO 1403:1995 (renumbers the BS as BS EN ISO 1403:1997) Rubber hoses, textile-reinforced, for general-purpose water application Specification The European Standard EN ISO 1403:1997 has the status of a British Standard ICS 23.04
2、0.70 BS EN ISO 1403:1997 This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 March 1996 BSI 03-2000 The following BSI references relate to the work on thi
3、s standard: Committee reference PRI/66 Draft for comment 92/42981 DC ISBN 0 580 25564 6 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PRI/66, Rubber and plastics tubing, hoses and hose assemblies, upon which the followi
4、ng bodies were represented: Association of Metropolitan Authorities British Coal Corporation British Compressed Gases Association British Rubber Manufacturers Association Ltd. Chief and Assistant Chief Fire Officers Association Energy Industries Council Fire Extinguishing Trades Association Home Off
5、ice London Fire and Civil Defence Authority Ministry of Defence RAPRA Technology Ltd. Society of Motor Manufacturers and Traders Limited The following bodies were also represented in the drafting of the standard, through subcommittees and panels: British Fluid Power Association Chemical Industries A
6、ssociation Health and Safety Executive Institute of Petroleum LP Gas Association Petrol Pump Manufacturers Association United Kingdom Petroleum Industry Association Ltd. Amendments issued since publication Amd. No.DateComments 9703November 1997 Indicated by a sideline in the margin BS EN ISO 1403:19
7、97 BSI 03-2000i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Forewordiii Text of ISO 14031 BS EN ISO 1403:1997 ii BSI 03-2000 National foreword This British Standard has been prepared by Technical Committee PRI/66 and is the English language version of EN ISO
8、1403:1997 Rubber hoses, textile-reinforced, for general-purpose water applications Specification published by the European Committee for Standardization. It is identical with ISO 1403:1995 published by the International Organization for Standardization (ISO). It is a revision of BS 5119:1980 which i
9、s withdrawn. This British Standard is published under the direction of the Sector Board for Materials and Chemicals whose Technical Committee PRI/66 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or
10、 proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI, 389 Chiswick High Road, London W4 4AL.
11、 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises
12、 a front cover, an inside front cover, pages i and ii, the EN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the
13、amendment table on the inside front cover. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1403 May 1997 ICS 23.040.70 Descriptors: See ISO document English version Rubber hoses, textile-reinforced, for general-purpose water applications Specification (ISO 1403:1995) Tuyaux en caoutchouc ar
14、mature textile dusage gnral pour leau Spcifications (ISO 1403:1995) Gummischluche mit Textileinlage fr allgemeine Anwendungen mit Wasser Anforderung (ISO 1403:1995) This European Standard was approved by CEN on 1997-04-21. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi
15、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Sta
16、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national sta
17、ndard bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Cen
18、tral Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1403:1997 E EN ISO 1403:1997 BSI 03-2000 2 Foreword The text of the International Standard from Technical Committee ISO/
19、TC 45, Rubber and rubber products, of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 218, Rubber and plastics hoses and hose assemblies, the Secretariat of which is held by BSI. This European Standard shall be given
20、the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 1997, and conflicting national standards shall be withdrawn at the latest by November 1996. According to CEN/CENELEC Internal Regulations, the national standards organizations o
21、f the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. ISO 1403:1995(E) ii BSI 03-2000 Contents Page F
22、orewordiii 1Scope1 2Normative references1 3Types of hose1 4Construction and materials1 5Dimensions1 6Physical properties2 7Marking2 Annex ZA (normative) Normative references to international publications with their relevant European publicationsInside back cover Table 1 Minimum values of tensile str
23、ength and elongation at break of rubber lining and cover2 Table 2 Hydrostatic-pressure requirements2 ISO 1403:1995(E) BSI 03-2000iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Int
24、ernational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison w
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS EN ISO 1403 1997
链接地址:https://www.31doc.com/p-3747961.html