BS-EN-60966-2-6-1999 IEC-60966-2-6-1998.pdf
BRITISH STANDARD BS EN 60966-2-6: 1999 IEC 60966-2-6:1998 Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for TV and radio receivers Frequency range 0 to 3 000 MHz, IEC 60169-24 connectors The European Standard EN 60966-2-6:1999 has the status of a British Standard ICS 33.120.10 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-6:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 March 1999 © BSI 09-1999 ISBN 0 580 32154 1 National foreword This British Standard is the English language version of EN 60966-2-6:1999. It is identical with IEC 60966-2-6:1998. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires and waveguides, RF connectors, and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-6:1999 © BSI 09-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60966-2-63 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60966-2-6 January 1999 ICS 33.120.10 English version Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to 3 000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:1998) Ensemble de cordons coaxiaux et de cordons pour fréquences radioélectriques Partie 2-6: Spécification particulière pour cordons de connexion de récepteurs TV ou radio Bande de fréquences de 0 à 3 000 MHz, connecteurs CEI 60169-24 (CEI 60966-2-6:1998) Konfektionierte Koaxial- und Hochfrequenz-Kabel Teil 2-6: Bauartspezifikation für konfektionierte Kabel für Ton- und Fernsehrundfunkempfänger Frequenzbereich 0 bis 3 000 MHz, IEC 60169-24 Steckverbinder (IEC 60966-2-6:1998) This European Standard was approved by CENELEC on 1999-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels © 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60966-2-6:1999 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 © BSI 09-1999 2 Foreword The text of document 46A/335/FDIS, future edition 1 of IEC 60966-2-6, prepared by SC 46A, Coaxial cables, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-2-6 on 1999-01-01. The following dates were fixed: This EN 60966-2-6 is to be used in conjunction with EN 60966-1:1993, EN 60966-2-1:1995 and EN 60966-2-2:1994. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60966-2-6:1998 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 Annex ZA (normative) Normative references to international publications with their corresponding European publicationsInside back cover latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 1999-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-10-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 © BSI 09-19993 Introduction This detail specification relates to cable assemblies for radio and TV receivers, and in particular to the cable subfamily type F. This detail specification should be used together with the following IEC publications: IEC 60966-1:1988, Generic specification for radio frequency and coaxial cable assemblies Part 1: General requirements and test methods. IEC 60966-2-1:1991, Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxial cable assemblies. IEC 60966-2-2:1992, Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies. Reference documents: IEC 60169-24:1991, Radio-frequency connectors Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F). IEC 60410:1973, Sampling plans and procedures for inspection by attributes. IEC 61022:1989, Interconnection of radio and TV receivers to feeder systems outlets. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 4 © BSI 09-1999 1Prepared by IEC SC 46A 2 Document No. Issue: Date: 60966-2-6 Issue 3Available from: IEC 3, rue de Varembé Genève Suisse 4Generic specification: Sectional specification: Blank detail specification: IEC 60966-1 IEC 60966-2-1 IEC 60966-2-2 5Additional references: Detail specification for cable assemblies for radio and TV receivers 6 7Characteristic impedance:75 78Frequency range:0 to 3 000 MHz 9Weight:40 g/m + 50 g (typically)10 Minimum inside radius: For static bending: For dynamic bending: 25 mm 75 mm 11 Climatic category:40/70/2112 Applicable test groups:Ba, Eb, Eh, Ee, Mn 13 Connector type: Cable type: Marking: IEC 60169-24 (F) Straight plug 60096 IEC 75 or equivalent Optional Taper sleeves:On both ends (colour optional) 14 Variants:15Page 1 of 3 pages Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 © BSI 09-19995 16Inspection values, ratings or characteristics 17 Subclause 18 Value 19 Remarks Electrical Reflection properties Insertion loss Screening effectiveness Voltage proof Insulation resistance Inner and outer conductor continuity 9.1 9.3 9.9 9.10 9.11 9.12 U 20 dB U 15 dB U 12 dB U 10 dB 75 dB 55 dB U 1,0 kV U 105M7 OK 5 MHz to 400 MHz 400 MHz to 862 MHz 862 MHz to 1 GHz 1 GHz to 3 GHz Up to 3 GHz Up to 1 GHz Up to 3 GHz Peak value 50 Hz Test voltage 500 V Low voltage d.c. Mechanical Tensile Cable crushing Flexure Flexing endurance 10.1 10.4 10.2 10.3 45 N 700 N 500 cycles 20 cycles Interface OK Duration 1 min Test 9.12 Test 9.3 Force 5 N20/min Test 9.9 Test 9.12 and 9.9 Under qualification approval, the qualification shall be conducted in accordance with 13.3 of IEC 60966-2-1 taking into account the specified variants. Only the tests whose results might depend on the variants shall be repeated. Under capability approval, the qualification shall be conducted on the relevant CQCs as defined in 13.4 of IEC 60966-2-1 and described in the capability manual (CM). Unless otherwise specified in the CM, only lot by lot tests from groups Ba and Eb shall be conducted on delivered products, all other tests shall be performed on CQCs as defined in 13.4 of IEC 60966-2-1 and described in the CM. Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 6 © BSI 09-1999 Recommended grouping of testsRecommended severity 20 Group 21 SubclauseTest 22 Periodicity 23 NC IL 24 NQA AQL 25 n 26 c 27 Length of specimen Ba8.2 8.3 Visual inspection Dimensional inspection Lot by lot Lot by lot S3 S3 4.0 4.0 Eh 9.1 9.3 Reflection properties Insertion loss Lot by lot Lot by lot II II 1.0 1.0 Eb 9.10 9.11 9.12 Voltage proof Insulation resistance Inner and outer conductor continuity Lot by lot Lot by lot Lot by lot II II III 1.0 1.0 1.0 Ee9.9Screening effectiveness1 yearI10 Mn 10.1 10.4 10.2 10.3 Tensile Cable crushing Flexure Flexing endurance 3 years 3 years 3 years 3 years 30On a CQC variant 1 l = 300 mm Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 © BSI 09-1999 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. PublicationYearTitleEN/HDYear IEC 60169-241991Radio-frequency connectors Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) EN 60169-241993 IEC 604101973Sampling plans and procedures for inspection by attributes IEC 610221989Interconnection of radio and TV receivers to feeder system outlets Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-6: 1999 IEC 60966-2-6:1998 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, o
