BS-EN-60966-2-6-1999 IEC-60966-2-6-1998.pdf
《BS-EN-60966-2-6-1999 IEC-60966-2-6-1998.pdf》由会员分享,可在线阅读,更多相关《BS-EN-60966-2-6-1999 IEC-60966-2-6-1998.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 60966-2-6: 1999 IEC 60966-2-6:1998 Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for TV and radio receivers Frequency range 0 to 3 000 MHz, IEC 60169-24 connectors The European Standard EN 60966-2-6:1999 has the status of a Br
2、itish Standard ICS 33.120.10 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 60966-2-6:1999 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of
3、the Standards Committee and comes into effect on 15 March 1999 BSI 09-1999 ISBN 0 580 32154 1 National foreword This British Standard is the English language version of EN 60966-2-6:1999. It is identical with IEC 60966-2-6:1998. The UK participation in its preparation was entrusted by Technical Comm
4、ittee EPL/46, Cables, wires and waveguides, RF connectors, and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquirie
5、s on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all
6、IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn t
7、o the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Cata
8、logue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their
9、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 6, an inside back cover and a back cover. This standard has
10、been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled C
11、opy, (c) BSI BS EN 60966-2-6:1999 BSI 09-1999i Contents Page National forewordInside front cover Foreword2 Text of EN 60966-2-63 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13
12、02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60966-2-6 January 1999 ICS 33.120.10 English version Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers Frequency range 0
13、to 3 000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:1998) Ensemble de cordons coaxiaux et de cordons pour frquences radiolectriques Partie 2-6: Spcification particulire pour cordons de connexion de rcepteurs TV ou radio Bande de frquences de 0 3 000 MHz, connecteurs CEI 60169-24 (CEI 60966-2-6:1998
14、) Konfektionierte Koaxial- und Hochfrequenz-Kabel Teil 2-6: Bauartspezifikation fr konfektionierte Kabel fr Ton- und Fernsehrundfunkempfnger Frequenzbereich 0 bis 3 000 MHz, IEC 60169-24 Steckverbinder (IEC 60966-2-6:1998) This European Standard was approved by CENELEC on 1999-01-01. CENELEC members
15、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
16、to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has
17、the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CE
18、NELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldw
19、ide for CENELEC members. Ref. No. EN 60966-2-6:1999 E Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60966-2-6:1999 BSI 09-1999 2 Foreword The text of document 46A/335/FDIS, future edition 1 of IEC 60966-2-6, prepared by SC 46A, Coaxial
20、cables, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-2-6 on 1999-01-01. The following dates were fixed: This EN 60966-2-6 is to be used in conjunction
21、 with EN 60966-1:1993, EN 60966-2-1:1995 and EN 60966-2-2:1994. Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60966-2-6:1998 was approved
22、by CENELEC as a European Standard without any modification. Contents Page Foreword2 Introduction3 Annex ZA (normative) Normative references to international publications with their corresponding European publicationsInside back cover latest date by which the EN has to be implemented at national leve
23、l by publication of an identical national standard or by endorsement(dop) 1999-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2001-10-01 Licensed Copy: sheffieldun sheffieldun, na, Mon Nov 13 02:20:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN
24、60966-2-6:1999 BSI 09-19993 Introduction This detail specification relates to cable assemblies for radio and TV receivers, and in particular to the cable subfamily type F. This detail specification should be used together with the following IEC publications: IEC 60966-1:1988, Generic specification f
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-EN-60966-2-6-1999 IEC-60966-2-6-1998 BS EN 60966 1999 IEC 1998
链接地址:https://www.31doc.com/p-3743553.html