斗式提升机外文文献翻译中英文翻译.doc
《斗式提升机外文文献翻译中英文翻译.doc》由会员分享,可在线阅读,更多相关《斗式提升机外文文献翻译中英文翻译.doc(17页珍藏版)》请在三一文库上搜索。
1、外文资料Bucket elevatorBucket type lifting machine is a fixed device of mechanical conveying equipment, mainly used in powdery, granular and small block materials for vertical lifting, can be widely used in various size of feed mill, flour mill, rice mill, refineries, starch factory and grain depot, por
2、t and dock bulk material.Bucket elevator for vertical lifting through the crusher limestone, coal, gypsum, clinker, dry clay block granular material as well as raw material, cement, coal and other powder materials. According to the different speed of hopper, the bucket elevator can be divided into t
3、hree types: centrifugal discharge, gravity discharge and mixed type discharge. Centrifugal type unloading material bucket speed faster, for conveying powdery, granular and small shape grinding material cut small; gravity discharge material slow speed of the bucket for bulk transport, the proportion
4、of larger, grinding Zhuo materials, such as limestone, clinker, etc. The traction component of the bucket elevator has several kinds of chain, plate chain and adhesive tape. Ring chain structure and manufacture of relatively simple, is also very strong connection with the hopper, conveyor mill Zhuo
5、of material, wear a small chain, but the larger self. Chain plate structure of a solid, lighter weight, applicable to a large quantity of hoist lifting, but articulated joint is easy to wear out, the tape has the advantages of simple structure, but not suitable conveyor mill cut large materials, the
6、 ordinary belt material temperature does not exceed 60 DEG C, steel cord belt clip allows the temperature of the material up to 80 DEG C, heat-resistant tape allows material temperature of 120 DEG C, ring chain, plate chain conveying material temperature of up to 250 DEG.Scope of applicationThis ser
7、ies bucket elevator is suitable for conveying powdery, granular and small shape of grinding Zhuo and grinding Zhuo small materials, such as coal, cement, stone, sand, clay, iron ore and other, because the elevator traction mechanism is a circular chain, thus allowing transport of high temperature ma
8、terials (material temperature of not more than 250 DEG C). General conveying height up to 40 meters.functionThe lifting equipment with large conveying capacity, high lifting height, stable and reliable operation, long life advantages, its main properties and parameters with the vertical bucket type
9、lifting machine (jb3926-85) (the standard equivalent with reference to the international standards and foreign advanced standards), ring chain traction with the mining high strength ring chain MT36-80, the lifting machine is suitable for conveying powder, thus allowing higher temperature of the mate
10、rial conveying.characteristicDriving powerDrive power is small, the inflow type feeding, induction type unloading material, large capacity hopper intensive layout. The material lifting almost no feed back and dig material phenomenon and is therefore invalid less power.Lifting rangeLifting range, thi
11、s type of hoist the kinds of materials, performance requirements, not only can improve the general powdery, granular materials and improve grinding Zhuo of larger material. Good sealing performance and environmental pollution.Operation abilityGood operating reliability, advanced design principles an
12、d processing methods to ensure the reliability of the whole operation, no failure time more than 20 thousand hours. The lifting height is high, and the lifting machine runs stably, so the height of the lifting height can be achieved.service lifeThe use of long life, enhance the feeding machine to ta
13、ke into the type, without the need to use a bucket material, material rarely occur extrusion and collision phenomenon. This machine in the design to ensure the materials in the feeding and unloading is less scattered, reduces the mechanical wear.working principleHopper to material from below the sto
14、rage scooping up, along the conveyor belt or chain ascension to the top, bypassing the top wheel turned downward, bucket hoist material poured into the receiving groove. Belt conveyor belt conveyor belt generally used rubber belt, installed in the bottom or above the driving drum and the upper and l
15、ower on the roller. Chain drive bucket elevator is generally equipped with two parallel transmission chain, on or below a pair of transmission chain wheel, or above is a pair of wheel. Bucket elevator is generally equipped with a chassis, in order to prevent the dust in the bucket elevator.structure
16、Airplane partsThe upper casing, shaft parts, reducer, coupling and motor assembled together.Middle casingAccording to the height of lifting, configured with different number of middle casing combined is able to meet the needs of.Lower partBy the bottom casing, driven shaft parts and tensioning devic
17、e to form a whole. The side door of the cabinet can be opened, and the inner side of the casing can be checked for cleaning.Chain and hopperThe chain chain for steel welding. The hopper is fixed on the joint of the chain. Different height of the bucket lift machine is set the corresponding number of
18、 chains, connectors, and hopper.multi-functionMulti function hoist is a kind of electric hoist can be used in the ground and air. It is widely used in the construction industry. It has large conveying capacity, high altitude, stable and reliable operation. Multifunctional electric hoist rated liftin
19、g weight of 500 kg / 300 kilograms, multi-functional electric hoist the maximum lifting height of 100 meters, multifunctional electric lifting machine 500 kilograms improve (run) speed 5.5m/min; 300 kilograms of ascension (run) speed 8m / min,Rated up to 500KG, 300KG;The maximum lifting height: 100M
20、The lifting speed is: 5.5M/MIN, 8M/MIN;Motor power is not as follows: 1.5kw, 1KW, 1.5KW, 0.4KW;The use of power supply: single phase and three-phase two.Classification of multi function elevator:Multi function lifting machine is divided into DTS-30 multi-function elevator and DTS-50 multi function D
21、TS50-80-A, DTS50-80-B, DTS30-80-A, DTS30-80-BOther varietiesHL type ring chain machineThe HL type ring chain centrifugal bucket elevator is composed of a moving part (a hopper and a traction chain), an upper section with a transmission chain wheel, a lower section with a tension wheel, a middle casi
22、ng and a driving device.Installation and maintenanceMachine maintenance is a very important regular work, it should work closely with the operation and maintenance, and should have full-time personnel on duty check.BearingAll the load bearing 1. Crusher assume a machine, so good lubrication on beari
23、ng life have great relationship. It directly affects the machine life and the operation rate, therefore require the injection of a lubricating oil must be clean, seal must be in good condition and main oiling the machine of a rotating bearing, roller bearing the all gear and bearing, sliding plane.2
24、 the installation of the new tyre must be examined often prone to loose.3 pay attention to the work of each part of the machine is normal.4 pay attention to check the wear degree of easy to wear parts, always pay attention to replace worn parts.5. The plane of the bottom of movable device, should go
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 提升 外文 文献 翻译 中英文
